The Daniel Defense Shorty AR10! | DD5 SBR

Uniform & Arms
3 followers
The DanielDefense DD5 SBR is a fun little .308 rifle. This is my first time running the gun and it performed well...except for getting the bolt stuck...Let me know if you've come across this issue as well.
#guns #2A #film #clintmorgan
DD5SBR, the 12.5 inch S2W profile barrel.
This is a proprietary Daniel Defense profile barrel, heavy, heavy profile.
Mid-length gas system, 1 in 10 twist, 5.8x24 thread pitch,
and comes with a 20 round PMAG, and feels freaking awesome.
Dang!
First and foremost, welcome back everybody.
Clinch here today, excited to be talking to you about an SBR,
chambered in .308 from Daniel Defense, the DD5SBR.
As I've already mentioned, it's a 12.5 inch barrel,
so as you can imagine with the .308 caliber, it's spicy.
Even with my Disavowed Group Nocturnal 3 silencer on there,
you can still see it is throwing quite a fireball at the end.
Now, Disavowed Group makes one heck of a great can.
Lightweight, effective.
Actually, me and Quinn were shooting this without ears on initially,
because we were just excited to shoot it, and I was like,
wait a minute, we should probably put some hearing protection on there,
because it peaks ever so slightly every now and then.
Now, it does come with Daniel Defense's linear comp, which is great and all,
but let's be real, pretty much a blast deflector.
It is loud and concussive, and I didn't even bother messing with that.
I just went ahead and threw a can on it, which is kind of ideal for this gun.
I know you're probably thinking, a shorty .308, how is that ideal?
Because for one, I'm just going to be doing that periodically, because this is fun.
But for one, it has an adjustable gas block on it.
You take the supplied Allen wrench that it comes with,
and then right in here, you're going to notice, right through the rail,
you can either switch it to unsuppressed or suppressed.
There's a little U for unsuppressed, S for suppressed.
So yeah, right now I've got it set on the suppressed setting,
because I was letting my buddy Rich, Patriot Rich on Instagram,
run this during our filming of my very first cinematic short film
that's coming out very, very soon, so stay tuned for that.
But anyway, my buddy Patriot Rich, I put this in his hands,
he was like, oh yeah, this is where it's at.
He's like six foot forever and lives in the gym,
so he was running this like a Mark 18 with nothing on it.
But sorry, buddy, I didn't realize that I had it on the unsuppressed setting
the entire time you were shooting it suppressed,
because I noticed, I was like, hey, that thing's barking.
Oh well, what are you going to do?
7075 T6 material is what we are made out of for the upper and lower,
which is great, that's quality hard stuff.
That's what she said.
And you're going to notice too, it's got that proprietary rail system
that Daniel Defense likes.
To me personally, I wouldn't switch out the rail anyway, it's pretty solid.
The only thing that I would switch this rail out for is a Picatinny quad rail, Daniel Defense.
You know, I mentioned that, and then on your social, not even like a day or two later,
you guys dropped a picture of one.
Make it happen, or you suck, and that's all there is to it, all right?
Speaking of Daniel Defense, if you haven't had the opportunity
to pick up your very own MagDump Morgan Gun Owners of America Signature Series Mark 18,
you should.
Comes with the EOTech EXPS-2, Huxworks muzzle device, burnproof gear,
SVA5 brace from SV Tactical, driven arms co-grip,
a couple of other things that I think you guys might like.
Other than the proprietary rail system, everything else on it is pretty typical.
The DD5 stock and grip, which you guys already know I'm going to be
taking that off, taking that off.
And the trigger is just regular old mil spec.
We can, let's be raw.
I was going to clear it out, ghost it, show you guys.
Let's just shoot it.
How about it, right?
Ooh, I went for target one initially.
1.61, that was fast though, all right?
Those went right over the left shoulder.
What did you say?
Oh, it sounded like that dude from Major Payne.
Well, I hit him in the crotch once.
There we go.
All right, so ambidextrous controls.
I just recently did my ambi control video, by the way.
So you're going to notice that it's the exact same ones that you saw on the M4A1.
All of there are three guns, all right?
So send the bolt home on the right-hand side.
I like that.
Mag release on the left-hand side.
There you go.
You're going to notice too, before we ghost the trigger on this thing,
I got her oiled up, all right?
There's one drawback to the AR-10 platform.
It's finicky.
It's picky.
It's picky about its ammo.
It's picky about magazines.
It's picky about the cold.
It's picky about the hot.
She's just a temperamental girl.
One of the malfunctions that I have actually had happen, unfortunately not on video,
a double feed, which could have been a magazine issue,
a failure to feed, which could have been a magazine issue.
Anyway, all right, let's get to it.
It's almost like I speak things and they come true sometimes.
Oh, there it goes.
Goodness.
A little sticky, guys.
I haven't cleaned this thing and it's only been shot suppressed.
I think what needs to happen is two things.
I need to shoot it more and clean it more.
Let's go over to the barrel.
There we go.
Okay, the temperamental thing.
I'm just going to let it softly go home.
There we go.
All right, and we're going to go to focus on the trigger here.
You're going to notice this, how dirty my hands are,
because like I said, I've got this thing very well lubricated.
We're going to start applying a little bit of pressure,
straight pull, single stage.
Okay, not bad, not bad.
Oh my.
Dude, you saw that, right?
I'll let it go home soft and easy.
All right, fine, have it your way.
Now what we're going to do, I'm going to beat you in submission.
Good thing.
All right, apparently it's winning and I'm not.
What are we going to do?
Break it down, clean it, or at least wipe it down.
Try to clean out the chamber some and see if that does any work.
Do you have a rag in your car?
All right, guys, we're going to wipe this bolt down with Quinn's sweatshirt
and see if that makes life any better for us.
Okay.
Oh, hey, remember that ambi control video?
I needed my AR takedown tool and I thought the little piece was threaded.
It does look threaded in there, but it looks like the brass is sheared off.
So that little piece, I don't know, I threw it somewhere.
My concern is that right there.
Trying to actually get the bolt out,
since it seems to be pretty well jammed in there and I can't mortar it.
What did I say the number one rule is?
Life will be easier if you're just not a bitch.
You're not going to beat me today.
First of all, let's just go ahead and do a clean finger test, right?
Let's get up in that chamber.
It's a little warm.
I'm just going to spray this up in there for a second.
All up in there.
We're going to not use Quinn's sweatshirt.
Your sweatshirt's been saved, bro.
Let's see if this helps us out a little bit.
So that way we can get back to this video.
But it goes to show you another thing, guys.
This gun, since I've had it in my possession,
this is my first time actually breaking it down,
removing the upper from the lower.
We are talking maybe 200 rounds.
Today we probably put about another 100 through it.
So let's say 300 rounds because about 200 rounds before we got out here.
Yeah, not a high round count before needing to actually clean it
or do a field cleaning.
You're going to notice the bolt carrier obviously is substantially larger
than that of a 5.56 bolt carrier because we're dealing with a bigger bullet.
Imagine that.
Overall though, firing pin, retaining pin just wants to come on out of there.
That's wild.
I haven't seen that before.
I will say this, this coating that they have on the bolt carrier,
this DLC coating.
I mean, this is impressive.
I mean, the bolt is hardly dirty, the bolt carrier.
That's cool.
Whatever this coating is, I like that.
Not going to stop me from doing this though.
And just for the sake of it, let's do the same thing to the charging handle,
which, my goodness, it is dry in there.
So when Daniel sent this to me, I don't know if this is a demo gun.
I don't think it was a brand new gun.
Maybe.
I don't know.
I don't think it was a brand new gun.
I do not know when the last time any maintenance was provided on this DD5 SBR.
All right, Quinn, speak loud enough so the audience can hear you.
You think it's going to run?
Yeah.
You think it's going to run?
Quinn has hope, guys.
Hey, look at that.
Maybe clean your guns every now and then.
But also, again, not having a very high round count through it.
That's interesting.
But let's give credit where credit's due.
Once again, 12.5 inch .308 full-time suppressed.
Yeah, all right.
Let's see here.
How many rounds did you put in that?
I think one too many.
One too many?
Yes, for sure.
There's no play in there.
No, you're good, dude.
All right, Quinn's still learning.
Apparently, so am I because I should have realized I didn't see it.
Anyway, just as I thought.
I mean, she run, though.
Just that one mag, it already felt like it was getting a little sticky.
So this isn't a full in-depth review.
Obviously, I'm not taking it out the distance.
I'm not doing like a 100-yard group or anything.
I just kind of wanted to do a little initial review.
And I like it, but I obviously have some hesitations, as you've seen on video.
With that being said, though, I do think with some maintenance
and just shooting it more, I feel like it wasn't a new gun that was sent to me.
Maybe they used it for like some promotions or something,
but they actually haven't like really run it, you know?
So that's my only thing.
By the way, use code MAGDUMP at EOTech if you're looking to save yourself some money,
especially right around the holidays, all right?
And with that, too, make sure you're checking out my friends
over at Manadnock Firearms who've been supporting the channel since when?
That's right, day number one.
Well, I'm up north.
Who are lateral to me?
Well, actually, they're a little bit more further south.
It doesn't matter.
Anyway, they're based in Illinois,
and they are ultimately spreading and educating individuals about firearms.
They're spreading information about firearms.
They're trying to get people armed, especially in a less-than-free state like Illinois.
And hold up displays.
If you're looking to display such awesomeness on the wall,
get it out of the back of your safe.
Get it up off of the ground so that way your wife isn't tripping all over it.
Or you, for that matter.
Display it beautifully with your Made in America wall panels from hold up displays, all right?
Excellent.
And last but not least, this right here is a two-stamp setup.
What does that mean?
The silencer requires a tax stamp,
and this being a short-barreled rifle requires a tax stamp.
The Department of Justice just responded to Gun Owners of America's lawsuit,
in the big, beautiful lawsuit,
ultimately saying that the National Firearms Act is an infringement
and that it should be dismantled, destroyed, and forgotten about.
But the DOJ said no.
They sided with the NFA.
So much for the most pro-gun DOJ ever, or pro-gun admin-er.
Whatever it was, support organizations like Gun Owners of America
is actively fighting to defend and restore the Second Amendment.
The NFA shouldn't exist.
This setup right here, being a short-barreled rifle, having a silencer on it,
shouldn't require any taxes paid,
shouldn't require any registration,
and should not require any wait time for approval.
A right delayed is a right denied.
Let me know what you guys think down in the comment section below about the DD-5.
Do you think there's hope here?
Do you think that I'm doing something wrong?
Do you think maybe I'm just mistreating it?
Do you think I'm not mistreating it enough?
Comment down below, and let's see what we can do about it.
With that being said, God bless you guys, and we'll see you next time right here.
I would put in a fresh mag.
Kind of went through all of them.
So I guess we'll just have to throw up another collage.
Dang!
