Marx [Allstate] #1859 150 Watt Transformer - Big Power for Small Budgets

Toy Train Tips And Tricks
93 followers
When looking for power for your layout, don;t overlook the Marx [sometimes marked 'Allstate'] #1859 150 Watt transformer. You can often find this monster in good condition for less than $50!
Hello again, this is Mike with Toy Train Tips and Tricks, and in this video we are taking
a look at a bargain source of power for your model train layout.
We are looking at a Marks Model 1859 150 watt power pack, 150 watts.
And amazingly, these beasts can usually be found at shows or on eBay in excellent working
condition for under $50.
So let's take a look at these things, and it is heavy, it is a beast.
This one says Allstate, as you can see, Marks made a line of trains that were sold at Sears
stores as Sears exclusives, and so many of the items that they made for Sears had the
Allstate label on them rather than Marks.
The Transformers, even some of the trains were decorated up, some of the locomotives
and cars were decorated up for Allstate, which was the Sears in-house brand.
These were made in the mid-1950s, and it's hard to specifically date Marks items because
they didn't put out catalogs every single year, and they often ran things for multiple
years, so mid-1950s is about as close as we can get.
Online I found a Marks accessory catalog, which, again, they didn't put out catalogs
every year, but this one, based on the items that are in it, it seems to be before 1957
and the 1955-56 range, and at that time this 150-watt Transformer listed for $15, which
at the time was quite significant.
So anyway, so your features on your 1859, obviously you have your variable voltage controller
for your track, stop, medium, high.
You have a circuit breaker, this is a pop-up type circuit breaker.
When there's a problem, this pops up and it does work, and then they push it down to reset.
So you look at the back, and we have a variable tap, 0 to 16 volts, so yes, you can run Lionel
trains, you can run Lionel American Fire, Marks, you know, whatever, on this power pack,
and then also a tap for accessory.
Now, one thing that it is missing, if you are a Lionel operator and you're looking for
something with a horn or whistle control, this does not have it, but you can always
add an additional horn whistle bell controller, such as a Lionel model, such as this K-Line
model, most of those you can find for under $20, or if you're, you know, good with a soldering
iron and components, there are schematics online for building your own whistle and bell
controller, which you can make for, you know, $5 or $6 worth of parts, if you know what
you're doing.
So let's take a quick look, just to make sure, I know I've tested this one before, but just
to show you that this puppy works, I'm going to hook it up to our handy volt meter here.
You can see this, get it in the frame, there we go.
Let's turn it on, and we are plugged in with the transformer.
So let's see what it's putting out, I've got it at full voltage here, and let's take a
look, one tap, two taps, and we are at 16.5 volts, right where we should be.
Okay, let's look at the fixed voltage, and boom, oddly enough, just slightly higher,
might be the way I have these connected.
Okay, but basically 16 volts from either side, fixed or variable, and let's turn it down
and see what half-throttle says, this should be around 8 or so, yeah, there we go, 8.1,
pretty good.
All right, so it does work, and just to show you that the circuit breaker works as well,
let's grab our handy-dandy screwdriver, let's short across the terminals, I thought I shorted
across the terminals, let's try this again, let's try this screwdriver, maybe a big one
so I don't hurt myself, there it went, and there is our circuit breaker popping up, let's
see, I didn't check the fixed, yep, there it goes, and there's our circuit breaker.
So the circuit breaker does work, and it was a neat new feature on Mark's transformers
in the 1950s, so there's your sales feature talking about your built-in circuit breaker.
So if you're looking for inexpensive wattage, a lot of power, you've got 150 watts going
to one track and one accessory output, you know, compare that to your Lionel ZW that
may have 275 watts total, but each tap going to the track, no more than about 100 watts,
so if you really need that much power going to one track, and you know, if you want to
have power in reserve, always a good idea, 150 watts, and again, these are generally
available in good shape, whether it says all-state or whether it says Mark's, you can find these
for $50 or less in good condition.
If you're looking for one, of course, you know, make sure it's got a good cord, if you've
got one out of show, you know, see if you can test and see if the circuit breaker works,
or you can add a replacement circuit breaker for just a few dollars, but it's a bargain
piece of equipment for running post-war and MPC, basically pre-digital era model trains.
So there we go, there's our tip and trick for today, the 1859 Marks 150 watt transformer.
So again, hope you like it, subscribe, share, tell your friends, tell your neighbors, come
back for our next video, until then, this is Toy Train Mike signing off for Toy Train
Tips and Tricks, and happy railroading!
