🥣 DIY Cold Porcelain Recipe 🌸 Step by Step Tutorial

Dream Fairy DIY
1.3K followers
286 Video Views·Mar 6, 2026
In this video, I’ll show you how to make perfect cold porcelain at home using simple ingredients! 🥣 This recipe is incredibly easy, budget-friendly, and results in a smooth, professional-grade air-dry clay that doesn't crack. Whether you're into flower making, jewelry, or miniature crafts, this clay is a game-changer! ✨
If you enjoyed this tutorial, don't forget to LIKE and SUBSCRIBE for more DIY craft ideas! 🔔 Click the bell icon so you never miss a new recipe! ✨
AI Generated·May contain errors
Hello everyone In this video
I'm going to show you how
to make cold porcelain—it's an air-dry modeling clay
And if you choose the right adhesive it'll be just as durable as polymer clay
To make the glue you'll need starch—corn
starch or potato starch will work equally well
But you should be more careful when choosing the glue You need white
PVA glue and it must be thick That'
s what you need to pay attention to
You can use PVA wood glue Thick PVA glue
contains a plasticizer—that's the secret
To check if the glue is right apply a thick layer to a smooth surface and let it dry
completely This is what the right glue looks like—it doesn't crack and remains flexible
I'm combining the starch with the glue The ratio is roughly one
to one though I say "about" because
the glue's consistency can vary
Before hand-kneading the clay I usually
oil my hands to reduce stickiness
You can add any missing ingredients during the kneading process
At the very end I add a little oil—sunflower olive conut
or baby oil—and it gives the
clay the elasticity it needs
This clay should be wrapped in plastic to prevent it
from drying out and then allowed to rest for a few hours
I keep this clay in a bag at room temperature for up to a week
This batch of clay has been in a bag for about a few weeks
It's already beginning to dry out and has lost its properties so try to use
your cold porcelain within a week Once
fully dried cold porcelain can be painted
Acrylic paints work best for this project
You can also mix paint directly into the
clay beforehand for pre-colored results Acrylics or any water-based paint will do
You can even use food coloring instead
of paint When you add paint the clay
starts sticking to your hands because of the water in the paint
Add a bit more starch to the paint then a touch of oil
And keep in mind the clay will darken slightly as it dries
Use the same glue you used to make the clay to join the pieces
together And grease silicone molds with oil before using them
That way the porcelain won’t stick to the mold and you can remove it right
away This takes practice and might not work the first time but it’s doable
Alternatively you can leave the clay in the mold for 20 minutes and remove it later If you don't
grease the mold you'll need to leave the cold porcelain in the mold until it naturally releases
It's completely dry
I hope this video was helpful and inspires you to grow creatively
