How To Add Non-Derail Function To Marx Turnouts!

Toy Train Tips And Tricks
93 followers
Episode 73: Ever since the Lionel #1122 turnouts of 1952 (and even earlier for their O22 "big brothers") O27 operators have expected automatic non-derailing operation in their turnouts. Marx turnouts, however, do not inherently have this feature, but it can easily be added to their switches as seen in this video.
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
Keep the trains running!
AI Generated·May contain errors
Hello again, this is Mike with Toy Train Tips and Tricks.
And today, once again, we're showing some love to our Marxist friends.
Again, not Karl Marx, but Louis Marx, the Toy King, and in three rail post-war trains,
the number two overall manufacturer in three rail trains behind, of course, Lionel.
Marx made a lot of great stuff, while generally not as complicated as Lionel,
generally not as many features, but Marx's items were generally bulletproof, they work well,
simple mechanisms, and inexpensive. So we're looking again at the Marx turnouts,
and in a previous video I showed you how you can convert these to make them much more friendly
with Lionel and other modern pickup shoes for locomotives and rolling stock.
This one has not been converted, this is as is, but today I'm going to show you how to
make these Marx turnouts to use the non-derailing feature that we take for granted in Lionel
turnouts. And sometimes it's a good feature, sometimes it's a bad feature, but if you want
it in the Marx turnouts, here's to do it. Here's how to do it. Wow, I need to speak better today.
Anyway, so the main tool you'll need is an insulated track section, and again I showed you
how to do that in another video. So this is my insulated rail, you can see here by the copious
quantities of electrical tape. I made this one years ago, and man, this one is overkill. But
it's good for this video because you can clearly see that we are insulated from our metal ties,
and I have an insulating track pin here, and here. So this rail is completely electrically
isolated from the other outside rail. So here is my common, and there is nothing. Insulated track
here. Okay, so we're all together. So also as I explained in the other video, for normal operation
on Marx, it really doesn't matter whether you go hot to the center or common to the center,
because it's not wired to the track in any way. However, to do this particular trick,
and several others, it's very important that you go with hot to the center post,
and then common to the two outside posts that throw the solenoid either direction. That's very
important for, like I said, this trick, and other things that you do with Marx accessories
and Marx turnouts. It works a lot better to put the hot to the center, common to the outside.
So what you see here, this represents my track power to the common. Hot can be anywhere. Actually
in this circuit, I don't need any hot to the center rail at all, but obviously you would be
running your train with hot to the center, but I don't need that for the turnout. All I need here
is my hot to the center post of the turnout. And so I would be running this, though technically
this is off the track power, I would have this run to my constant voltage, my accessory terminal
or accessory transformer. And the two outside pins are common that throw the switch either way. So
in this case, when the wheels come to this insulated track section, I want it to throw the
turnout to straight. So that's what's going to happen when the metal wheel makes the connection
from the common here to the common here. It's going to run the circuit through this wire, which
is going to come to right here, complete the circuit on my solenoid, and throw the turnout.
And boom. And here's the downside. As long as that wheel, as long as the train is on the track,
it's still powering the solenoid. If you do that too long, you can fry the solenoid.
So to do non-derailing on both sides, you would need two of these. And again, real quick, I'll
show you how it works. We'll pretend we have a second one. I'll take this apart, throw it to
the other side. Conveniently, I've already removed my one track pin. Okay. You can see that.
And I'm going to throw it the other way. So this time the rail for this one is going to be hooked
to this side, and it's going to throw the switch this way when it makes the connection here. So
same concept, opposite direction. Three, two, one, boom. And it worked. And again, as long as the
wheel is making the connection, it will continue to power the solenoid. So you don't want this in
an operation where the train is going to be sitting on there for a very long time, because you can't
overheat the solenoid, fry it, and it won't work any longer. These are very durable, but there's
an extent. It can only go so far. Before it gets too hot, you can melt the wires, and then you're
done. You're toasted. So for layout operation, you would want one of these on either side, two of
these insulated track sections, each with an insulated pin on either end. Unlike Lionels, it
does not matter whether you put the insulation on the inside or the outside, because again, the
switch is not wired to the track in any way. So that's how you make these marks turnouts into
non-derailing turnouts. You need two insulated track sections, which I've showed you how to make
before. You wire this one for the common to this post. You do this one to this post, and the wheels
make the connection, throw your turnout, and you are set and ready to go. So I hope you found this
useful, and I hope you like it. If you do, please subscribe, share, make a comment, tell your friends,
tell your neighbors. Until then, keep the trains running, and we'll catch you next time on Toy
Train Tips and Tricks!
