Lionel's GP7 - The Model And The Prototype

Toy Train Tips And Tricks
93 followers
32 Video Views·Mar 2, 2026
Episode 82: Lionel has produced its classic GP7 model for more than seven decades.
In this video, we take a look at the history of the real GP7, the production of Lionel's GP7, and a peek "under the hood" of a classic 1970's MPC model.
Hello again! This is Mike with Toy Train Tips and Tricks, and today we are going to take a look at
Lionel's very successful GP7 model and its derivatives, as well as a little background
on the real thing, the real GP7 model, and what it was all about. And we're also going to take
one apart, take a look under the hood, so you know what to expect if you should ever make a purchase
or run into maintaining one of these. So, starting with the history of the GP7.
In the years leading up to World War II, diesel dominance was established by the Electromotive
Corporation, later bought by General Motors and becoming the Electromotive Division of General
Motors, or EMD. EMD led the way in freight locomotives and passenger locomotives with
the popular F and E series as America entered World War II. But there was one segment of the
locomotive market that EMD was unable to push into, and that was the concept of the road switcher.
The first successful road switcher was made by ALCO, and it was their RS1 locomotive,
a very dependable and popular 1,000 horsepower locomotive designed to be the go-anywhere,
do-anything. It could do yard switching, it could run locals, it could be used on road freights,
it could be used in passenger service if equipped with a steam generator. ALCO continued to lead
the road switcher market as World War II began, and as the War Production Board placed limitations
on what manufacturers could make, ALCO was allowed to continue with their road switcher production,
even making some RS1s and their derivatives for the U.S. military during the war.
Meanwhile, EMD was allowed to continue with the E, F, and switchers in their diesel line.
After the war, with the success of the RS1, other manufacturers began to jump on board with the
road switcher market. Baldwin, Fairbanks Morse, Lima Hamilton, and others. EMD was the last to
jump into the road switcher market, and their first attempt in 1947 was the BL2. General Motors
thought that railroads would respond better to a locomotive that had clean design, much like the F
units, but also have the functionality of switching, and thus the BL or branch line locomotive.
The BL2 looks something like a mix between an F3 and a GG1 with front and back porches added.
Many debate whether the design of the BL2 was
so ugly it's cute, or so cute it's ugly. The verdict from the railroads themselves was pretty
much universal. Thumbs down. And fewer than 60 examples were built in the two years of production
in 1947 through 49. Meanwhile, ALCO continued its dominance, improving on the RS1 with the new RS2
version, and Baldwin and Fairbanks Morse continued to evolve their road switchers.
Finally, in 1949, EMD got it right with their second road switcher attempt, the GP7. The GP7,
or Jeep 7, was made concurrently with the popular F7 locomotive, both being 1500 horsepower
four-axle locomotives with the popular EMD 567 diesel prime mover. While the F design was still
more popular, there were about 30 percent more F7As and Bs produced than GP7s. The road switcher
was catching on, and the GP7 became the leader of that pack, far outpacing ALCO orders at the time,
and becoming the most popular road switcher made up to that point. The GP7 was a true utility
outfielder, being able to switch, run road freights, run passenger service, and do light
duty work as well. The platform was very easy to maintain, the prime mover and electrical systems
were very dependable, and this locomotive not only served very well in the 1950s, but many were
rebuilt in the 1970s and 1980s, and many GP7 frames and prime movers still work today, either
in tourist roads, in museums, or some of the multiple-time rebuilds might still be found on
some ranch lines in America today. A pretty good track record for a locomotive. GP7s came in
variations with or without steam generators for passenger service. With or without dynamic brakes,
that's that big bulge on top. Now, in Lionel land, a dynamic brake makes it a Jeep 9.
That's not exactly the case. Also, most railroads were still in the steam transition period
as the Jeep 7 came along 1949 to 1954, and many roads ordered theirs to run long hood forward,
imitating practice with the steam locomotive of having a large locomotive in front of the engineer
and crew for collision protection. And some railroads, like the Norfolk & Western and the
Southern Railway, continued to run long hood forward for decades afterwards. Now let's take a
look at the Lionel version. Lionel came out with their version of the GP7 in 1955, one year after
real production of the GP7 ended and EMD had moved on to the GP9. But no worries, GP7s were very
common across most parts of the country, and for most people the GP7 and GP9 were practically
indistinguishable, even for Lionel, as we're going to find out here shortly. By 1955, even though this
was the golden era of Lionel post-war production, cost-cutting had already taken place. So instead
of heavy die-cast frames on the locomotives, sheet metal was now the name of the game,
and locomotives like the NW-2 and FA were being redesigned and cheapened. Details were being
eliminated and costs were being cut. So the GP7, from the beginning, came with a sheet metal frame
as opposed to die-cast, a plastic fuel tank when applicable. Models that did not have a horn also
did not have a fuel tank, as the battery compartment was housed in the original fuel
tank. Power was provided by a single pullmore motor in a combined truck with the power pickups.
The other truck was simply along for the ride. Post-war versions, most of them had magnetraction,
many of them had horns, and most of them in the post-war era had headlights at both ends,
some only at one end. Handrails in the post-war era were kind of interesting in that from the cab
back were stamped sheet metal like here on the ends, and similar here, but near the cab were
wire handrails. This type was early MPC production. It started in 1972, but by 1978 Lionel had found
these were very fragile, and secondly, added to the installation process of having to pop this
plastic piece in and feed the wire through, so they began using a single one-piece sheet metal.
That's what I was looking for, sheet metal. And they eliminated the wire pieces. MPC production
is almost identical, although usually the magnetraction is replaced by traction tires,
as we see here. Most MPC versions do not have horns, but the other items that we'll see inside
is pretty much set up the same way as a post-war version. There were also some changes to the shell
made during the course of production. Here is an original 1955 shell. I took this out of the
strip tank to show you. Don't worry, I'm not destroying a handsome collectible. This was
already repainted by somebody else before I got my hands on it. But notice the three louvers under
here are very well defined. These three louvers, plus these two sets of vertical louvers, are what
distinguish a GP-7 body from a GP-9. These three louvers were later reduced somewhat to one full
size and two smaller size. I believe part of that had to do with providing lettering options,
making it easier for some of that. And later, these got smaller and smaller and smaller.
But the two sets of vertical louvers remained constant, even when Lionel came out with the
quote-unquote GP-9. Lionel's GP-9 was simply a GP-7 shell with an added dynamic brake
and winterization hatch. And this was a single piece that was added on. Now, this is a Williams
reproduction. This is part of the actual cast shell, but it is a dead-on copy of Lionel's GP-9.
And again, here you see their louvers are full size. It's hard to see under their frame here.
But we still have the two sets of vertical louvers. When Lionel went to the GP-9 quote-unquote,
they simply added the dynamic brake and everything else is a GP-7. And it stayed
that way for quite some time. Eventually, around 1978, the GP-9 shell with the dynamic brake
was modified to have these louvers eliminated. But these stayed the same. So then it was kind
of a hybrid GP-7, GP-9 for those of us rivet counters out there. But in any case,
so those are the main changes that happened externally was with handrails and with the
louvers and of course dynamic brakes for the GP-9 quote-unquote version. MPC also came out with
their quote-unquote GP-20, which again was a GP-7 with a shortened nose, which was a common
variation, especially in the 1970s. Railroads began to rebuild their original GP-7s and usually
chopping the nose was part of the process to provide better crew visibility.
So now that we've looked at the externals, let's take a look at the inside. Okay,
taking it apart is very easy. As we look on either end of the shell is a Phillips head screw
and that holds the shell onto the sheet metal frame. There's one. Stay there. Thank you. Turn
it around. There is. Now the second thing to watch out for is the connection of the handrails. Again,
whether this is wire handrails or whether it's the sheet metal extensions, there is a connection
here that goes into the cab. Now with the wires, it's a little tricky. You have to kind of
unthread these a little bit. In and out, in and out, in and out. And you can pop it that way
and that way you pull it out along with the shell. Now on the sheet metal versions,
there's a tab on the end that hooks into a little square slot
into the cab. But I like to disconnect these just a little bit to give myself some play
to get in here. And again, these are woven in and out, in and out. This one's being stubborn.
Come on, buddy. Come on. There we go. Pull that out of there. Pull that out of there.
And now when we separate, it'll come off and not be attached to the frame.
One out of here also. Come on. Pull the wire. Pull the wire. Pull the wire. That's one side.
And it's already off on the other side. Okay. So the frame, or I'm sorry, the shell is free.
And here you see the typical setup. You have a power truck on one end,
power truck on one end, along with the roller pickups, all self-contained
in one truck. This is the Pullmore motor version. Here you have headlights on either end. Sometimes
it's only on one end. On the post-war version, right here, there would be a hold for the battery
compartment, along with a bracket for the horn and the horn relay. Those would all be located
in this section on a post-war version. And here is our three-position reverse unit, E-unit,
with the lever sticking out the bottom here by the fuel tank. The rear truck is just along for
the ride. We have this little speed nut that holds it in place. And there's a little guide
right here. That slot is a little guide to help keep the truck from getting out of control on
there and helps it around curves. And that is the basic construction. If you need to get into the
motor itself, you see here are the brushes and brush springs. The commutator is underneath this
plate here, which is held on by these two screws. I'm not going to disassemble this because I know
this motor is in good shape, doesn't need to be cleaned, and I don't want to mess with it. But
you would take these two screws off. You can pop the top, and that gives you access to the face of
the commutator, which is under here. As far as basic maintenance, oil and lube, the gears get a
little bit of your favorite grease. Make sure it's plastic safe, especially on these. One complaint
from many people about the MPC version versus post-war is these Delrin gears right here.
I've never had a problem with a stripped Delrin gear, but many people complained that the plastic
versus the all-metal gears of the post-war version made these versions cheap. It was a
cost-cutting move, but as long as you're not pulling 60-70 car trains on this thing, you
shouldn't have any problems. Keep them lubricated. Now in the late 80s, the mechanical E-unit was
replaced by an electronic, so you see that. And sometimes an electronic horn was added
in those later units. And then eventually, the Pullmore motor was replaced by can motors, usually
two that were integral into the trucks. So the one motor was replaced by two eventually in the late
90s and into the 2000s. And yes, this 1955 model and its descendants are still in the catalog.
Here it is in the 2021 Lionel catalog, now with Lion Chief options, but it's still the basic frame
and basic shell from the 1955 version. So seven decades of use out of one locomotive, I would call
that a hit. And so this is the ubiquitous Lionel Jeep 7, Jeep 9, slash Jeep 20. The shells can be
different, but still the same basic drive, the same basic inners. And this design worked so well,
it became kind of the standardized Lionel diesel setup, whether it was a rectifier, an EP5, a U36B,
the Jeep 38, all started with this same basic idea of the sheet metal frame, power truck,
dummy truck, and this same basic layout. Sometimes the frame was lengthened or shortened
depending on the locomotive, but this worked. It was easy to maintain. It's dependable running,
just like the real thing. And it served both EMD and Lionel very well for over seven decades.
So here it is, the story of the Jeep 7. I hope you like it. And if you do, you know, like it,
share it, comment, tell your friends, tell your neighbors, please subscribe. And until then, we'll
keep the trainings running. We'll see you next time on Joy Train Tips and Tricks.
