Fun But Frustrating - The Lionel #3656 Operating Stock Car

Toy Train Tips And Tricks
93 followers
Episode 86: The #3656 Operating Stock Car Outfit was one of Lionel's most popular accessories in the Postwar Era. However, due to its complexity, this accessory requires a significant amount of TLC to keep it running properly.
We take one apart to see how the mechanism works so you can decide if these vibrating bovines deserve a home on your layout.
Hello again, this is Mike with Toy Train Tips and Tricks. Finally back after a long hiatus. Boy,
2021 has been a rough year. So I've been out. I had some shoulder surgery which I'm still
recovering from. It makes it hard to to reach things and move and twist and screw things down
and things like that. And you know the different members of the family have gone through COVID
and some other things. So yeah, it's been about seven months since the last video which is way
too long. But we are back and so today we are taking a look. We are kicking off the new season
shall we say of Toy Train Tips and Tricks with one of the most ubiquitous and at the same time
one of the most frustrating accessories of Lionel's post-war period. We have here the number
3656 Stock Car Outfit as it says in the instructions. Stock Car Outfit which is our 3656
operating cattle car and its associated platform and all the parts that go with it. Now
if you're buying one of these used just to make sure you've got all the parts you need
you will need as it says here in the instructions you will need the car. You'll need the platform.
It comes with nine head of cattle although it will work with fewer. I don't know how well
it would work with more. It'll kind of clog up your cattle ranch there. An original one will
come with three strands of wire which you'll need wire. You can replace that. The original
one will come with a lock on which you may or may not use. It will come with a number 364C
push button controller which I'm not using. I have one but I'm not using it and most importantly if
you want to use it on O gauge track you will need these two metal blades to come with your package.
These will adapt the car for your O gauge track. The 3656 was made from 1949 to 1955
with very very few changes along the way. The only change to the platform itself was the very
earliest 1949 production has a chain across here that disappeared by late 1949 never to return.
And the cars it has to do with generally with the type of decoration the colors and whether
these doors are plastic or die cast. So what's supposed to happen when the car operates and I
say that it's supposed to happen because more often than not with these cattle cars it doesn't
this is a very complicated mechanism and there's a lot that can go wrong and so more often than not
these you find these sitting on sidings on layouts and not actually operating.
They can be tuned to to proper use but they take a lot of a lot of work so it's best if you're
going to try to keep these working put one towards the front of your layout where you can reach it
you can get at it frequently to make the adjustments that are necessary. Okay so what's
supposed to happen is when power is applied ideally right around 12 volts two solenoids
are activated one inside the car which pops open the doors and allows any um so whoops
hit the camera there it pops open the doors and to allow cows to go in and out there is a door on
the back side with a mechanism that you can open to allow cows to come out or when you close the
door it locks the path so the cows can't come out. And that's pretty much it for the car itself
there's a solenoid in there there's a spring it opens the doors and that's pretty much what it
does. Solenoid inside the corral does multiple things one it drops the platforms down hopefully
to the level of the doors on your car hopefully exactly the level of the cars of the door on your
car so that the cows may enter and exit and secondly this mechanism starts to vibrate
making the cows um the little feelers on there it's kind of like the old electronic football games
where you would hit the power and it vibrates and a little mineral all over that's how the cows
operate. So I'm going to turn the power on we're going to see the cows move a little bit and
they're probably not going to go into the car this time
yeah here's what typically happens with mine is the cows commit suicide right off here part
because my platform is not adjusted properly to the right level it's a little too high
and the cows like to make a right turn and dive onto the track so let's take a look at what we've
got going on here see how the mechanism works and see what we can do to maybe fix this.
Okay so taking a look at the car you see here on the bottom this is our solenoid
and on the bottom all of these cars by the way come with these early staple end trucks because
they all use these early pickup shoes that were used with the earliest uncoupler post-war and
long pre-war also uncouplers but this is also how the car is powered through the power blades here
on the base of the corral come up through the track and power here and here so when
the accessory is activated that's where your power comes from and here is the solenoid and
now normally if you put this on power and you get nothing it's usually not the solenoid that's the
problem it's usually a problem with these pickups so wires come off over the years and so you take
some stranded wire and re-solder is usually the problem sometimes you even have these break off
or they get out of adjustment one way or another so that they're not hitting the blades
but most often the problem is here with the shoes and not with the solenoid slotted screws this is
an early post-war car they didn't use phillips here we go so take off the slotted screws i've
already removed the one from the other side for the purpose of the video okay taking out the screw
there it goes yay okay set that aside all right so we took out the two end screws and we're just
going to pry this open and take a look at the inside and so here's the important parts on the
inside of the car so we have the solenoid and its main purpose is as the solenoid activates
it pulls this post down which raises this spring up which opens the doors like so by pressing on
there now in this case i noticed that my doors were not popping up quite quickly enough so i
probably need to bend this spring up a little more for better operation i will do that
here later and the weird thing with this car is i actually had to replace this plunger
mechanism because this cross piece had fallen out so there was nothing there to activate the spring
and it wasn't working so i had to get a replacement part which parts are available
i believe no plug here but i think i used the train tender for that part i also i order from
several different parts places usually who's got the best stock and and best prices on things so i
compare shop but anyway so here we have the ramp that the cows are in this part will vibrate
and to facilitate that there are if we bend this back right here there is a rubber stopper
and there's one here and there's one here yeah there we go now you can see it
these over time will get dry and hard and will need to be replaced it's very important that
these are nice and soft and cushiony so that the vibration doesn't go down through the car
and everything else interfere with that and again replacement parts are available
but if you want to press on it i want you want it to feel a little springy
and that's the rest of the important parts on the inside of the car i'm sorry one last piece
and that is this bar right here when the door is closed it prevents cows from escaping when the
door is open cows can fly right through and out the ramp every once in a while you'll find a car
that for whatever reason this needs to be bent and adjusted to allow the paths of the of the
cows so that's the mechanism for the car itself let's take a look at the platform okay back at
our corral it might be the okay corral they're pretty good corral hahaha putty putty anyway so
here's our corral and like i said the original production there would have been a chain across
here that disappeared by late 1949 never to return so you have a ramp these were actually
available for separate sale i guess they got lost from time to time what i notice about them is they
tend to vibrate themselves off and another use that my son found when we were having problems
when the car wasn't working for lack of parts he would set the ramp up up here and park a truck
under the end and he would run the cows from the corral into the truck and that worked um so you
know kudos to him for creativity so anyway so you've got your platform you have your cattle
and the function here again it's very important for the cows to have these little fingers
these are all rubber cows by the way and the little rubber fingers have to point diagonally
away from the front of the cow towards the rear and so as the vibration happens they will move
forward over time these can get dirty they can get clogged and yes replacement cows
are available these are working fine so let's take our cattle off so we can get to the rest
of the platform and yes maybe someday i will disassemble this and repaint it but i kind of
like the the patina this has been a well played with one so the platform itself the important
part the vibrating platform comes right off and importantly this piece right here sits
down into the hole of the solenoid so when the power is activated we get our vibration up and
down which transfers through the platform makes the cows move into the car hopefully
just like with the car there are some rubber feet here here and you can't see it but it's
behind this fence post right here and again over time this rubber dries out gets hard that
interferes with the operation of your of your corral replacement parts are available make sure
that you get some that are nice and they feel just a little squishy and not too hard so the rest of
the operation as the the solenoid kicks in it will also trigger this lever right here will go
up we'll start bouncing up which and see right here i had a little catch on this side obviously
my uh my platform needs some adjustment here but what should happen is when the power is engaged
this pops up lowers the platform down to the level of the car now what i just said i can see
right here i'm gonna have to make an adjustment because it's catching right here obviously this
side needs to be tweaked a little bit with a pair of pliers and also in operation some things you
need to know for this one you can adjust the amount of vibration there's a screw right here
which you can use to fine tune the amount of vibration between this and the car so you can
turn that back and forth to get um get the two to match up better and then these two tabs are what
you adjust to adjust whoops hit the camera again to adjust the level of the platform versus the car
so bend these tabs up and down against your car to see where the optimal spot is
for these to come down to match the height of the entrance and exit ramps from the car
you generally want at least one of these to be making contact if only barely but making contact
with the ramp inside the car to help get that vibration through there to help the cows move
better but again as you can see as i push down here i can see right now we've got a little bend
right here so this needs is bent a little that's been a little so this one's going to need some
adjustment before my cows are going to uh to work the right way but those are places to fine tune
between the set screw here and making adjustments to the height of your individual platforms ramps
on this side um all right so let's see what happens how operation is supposed to work okay
first of all if i'm using o gauge track regular o31 track instead of o27 i need to make a couple
of changes to the platform first of all for o gauge track these two slots right here um this
needs to go to the bottom slot so you remove this nut and also these two nuts so that you can
separate this top piece of the platform from the bottom piece of the platform that attaches to the
track and reassemble it with these tabs going through these two bottom slots secondly secondly
when you are using o gauge track instead of o27 there are tabs back here and here
that the o gauge track sits on top of o27 goes all the way to the bottom
the o gauge track sits on top of these little tabs and instead of these two
metal tabs here you would replace those with the larger o gauge blades so that to accommodate the
higher o gauge track um you still the power will still be able to reach the shoes on the higher
on the taller track for the car in order to make that work so in either case notice how
i have a piece here and a piece here the center line of two pieces of track goes right through
the center of the platform uh that's very important um in order to make everything
snap together now for electrical connections lionel recommends that you run this on track
power uh and that is the purpose of the lock on and as you see here in the instructions
from the lock on in that one wire from the lock on goes to the power switch the other goes
to your connections over here and you use the switch to turn it on and off and you set the power
with your track and hopefully put your locomotive in neutral while you're making your cows go now
the problem with that is well one if while you're operating the cows and something should happen to
interrupt track then suddenly your locomotive goes flying away and taking the train with it
secondly uh you know there are some line of locomotives that do not have a neutral position
that are only two position e units then you cannot use this car this platform with those
locomotives so i do it with accessory power instead now because this is such a finicky
accessory instead of having it attached to a fixed post on my constant voltage accessory
transformer i'm actually using a small k-line trainset transformer to give variable voltage
you heard it there and this has an off switch which is why i'm using this rather than a lionel
version so by turning this i can adjust and fine tune the voltage to the accessory while i'm using
it which it can be very important in order for making the cows do what you want them to do
so for that type of operation you will find over here your binding posts one has an insulator on it
in this case this one up here that one is your hot so i attach the hot side of my accessory
transformer to that the one without an insulator is the common and the common goes all the way
through the platform through the track and everything so i just hook up the common side of
the accessory transformer phased with the rest of my transformers uh just hooked up the common side
to that two wires two wire and just going to the transformer and back and we are in business and i
find that an easier way to go and again i can adjust the the voltage on the fly and so i can
adjust the speed of the cows as we go if we're just moseying on and i'm just moving them around
the corral um if i need to give one of them a little kick in order to get him to go off the
platform into the car or off to his death whatever the case may be uh i can use the variable voltage
on that small transformer to do so and one last thing regarding operation of the cattle car uh
and that is it works best if it is sitting on a siding rather than actually running around in a
train there's a couple reasons for that one this car with the solenoid and the ramp and everything
it is very heavy and so there aren't a whole lot of locomotives that can pull that sucker around
anyway especially some of the small starter starter set locomotives uh you'll have like a
two-car train uh because of the weight of the the stock car secondly just as the cows tend to be
finicky about getting into the car there's a lot of wiggle room in there and once they're in the car
going around the layout they have a tendency to tip over uh and you know how much fun cow tipping
can be um but in this case a tipped over cow means when you get back to the ramp it doesn't
want to come out and you pretty much have to you know pick the car up and shake it or take it apart
in order to get the cows untipped and back into operating condition so this is one that's best to
sit at the end of a siding once you get everything tuned up and uh you know let the visitors see it
go into the car and out of the car or in and out of the car in a circular motion um and uh and
operate it that way or you know just have the the corral itself the cows moving around that that can
be fun even without the addition of the box car so um there it is the 3656 stock car lionel from
1949 to 1955 um simultaneously one of the most fun and one of the most frustrating accessories
lionel made during the post-war period uh so if you find one on the show maybe give it a try maybe
it's a good conversation piece um or maybe you want to try your hand at keeping this sucker in
tune and working properly if you're up to a challenge but in any case there it is and uh
thanks for watching tell your friends tell your neighbors that we are back and we are going to be
making videos again perhaps not as frequently as before but uh we are back and uh with some more
toy train tips and tricks we'll keep them coming and until next time keep those trains rolling
