44 Home Depot Clarkston Ceiling Fan

TV Electric Fan
2 followers
12 Video Views·Mar 4, 2026
This fan is in Oil Rubbed Bronze finish, has 5 Walnut blades, it has 3 lights light kit, it has 3 40w daylight clear LED light bulbs, it has 2 bronze lightbulb and fan pull chains, and this fan is from January 2017
Hey guys, so here's this 44-inch Home Depot cork stand ceiling fan.
Yep, this is the second fan that I got from that teacher again along with the Lightix Moonglow.
So this fan's from her mom's house and the main reason why I got this fan because the
fan chain switch was broken. As you can see on the the screw nut is an original on the image.
It didn't come with the screw nut but I attached this screw nut to it to make it look like the
chain the whole switch is broken with the screw nut on. But yeah, I got a new pole
chain switch for it and now it works like brand new. Works just like normal again.
So yeah, and then when I got this fan, the whole fan was extremely dusty.
The fan is very dusty. The whole fan, motor housing, and the blades, the shades.
On top of the blades was the, I think on top of the blades was the worst and it's shown on the
image too. Yeah, that's what it looked like before and it looks like this now. Yep, I cleaned the
whole fan and it looks like new now. But the blades kind of sacked just a little bit. They
kind of drooped a little bit because there was one problem with her mom's house is that there
was like a root damage to her house and it was like a leak and her house had a lot of moisture.
So I think that's why the blades kind of drooped a little bit because she had root damage before
but it's fixed. So yeah, and then I got a new capacitor for it because I thought the original
capacitor was going bad and then I ordered a new one and then I noticed one of the blades
was a little bit bent and that's probably why the fan was going a little slow. And then the
motor bearings was a little stiff before too because I think it wasn't used for like a while.
It used to be wearing a lot 24-7. That's how it got dusty I think. I'm assuming but I'm not quite
sure. I don't know what speed was it on when the pull chain was broken. So yeah, and then when I
replaced the capacitor, well before I replaced the capacitor I noticed that one of the blades was bent
and then I fixed it and it's gone faster now and then the motor's gone a little faster like it
looks like it's working on normal speeds and then when the capacitor came I replaced it to a new one
and it still looks like it was the same. It just looks like normal. But anyways, this fan has a new
capacitor anyway. It still looks like normal and it blows good air and they will be very
appreciative of this fan when I return it because it looks like brand new. And I got her new pull
chains. I got longer ones. Well, these are actually the longer ones. I just shortened it a little bit
just only for this demonstration and they'll be longer about down here and I have a picture of it.
See how long the chains are? And here they are. Yeah, that's how long the chains are on this fan.
That will be for her mom's because she can't reach it too high since this fan's a Hargo
flush mounted so she has to have a longer chain so she can reach. And I got her new pull chains,
the bronze ones. I got them off of Amazon. It originally came with the white wooden pull
chain on the light and it was about down here. It was longer but I put it on the Lightex Moonglow
because it matches on that fan and it didn't really match this fan
and there was nothing on the chain. There was no chain left on the fan chain since it was broken.
And they'll be very happy about this fan how it turns out when they get this fan back and I'm
happy about it too. Like the Moonglow. So yeah, I'm about to go ahead and do a tour of this fan
and demonstrate it. This fan is an oil rubbed bronze finish. It has fine water blades showing
and it's reversible to cherry. I think it's cherry. I'm not 100% sure but the correct
finish will be in the description. Yep. It has three lights so I can't.
This fan includes the light bulbs. There are three 41 daylight LED bulbs but there's only one
and then there's two different bulbs. That's because um well it came with these three of
the exact same light bulbs. That's because two of the the other two light bulbs had
loose base and then when I was turning it a lot well before it broke off I turned it more
a lot a lot of times and then it fell out the socket. They used to work but um it just fell
out the socket because they're they're cheap light bulbs and they're warm-up brand light bulbs
because they say great great value on it and that's a warm-up brand. So um I got two new
light bulbs for this fan. They're also 40 watt daylight LEDs. I took two years and never used
them. You know and it will be for this fan and it matches perfect except the chandelier type
but it doesn't really matter. They do match original shades. It has the more rounded tips
off the edge which knowing this is a first generation Clarkston newer versions will have
the tips won't be as rounded as this and then top of the blade the blade finish on the top
is discontinued. They have different blade finishes on that uh one side for the second
generations but this side is still being made the uh walnut that one finish and then the other
finish is a little different for today's Clarkston second generation. So yeah it has two new light
bulb fans. Here's the top and here's the stickers inside the motor housing.
Yep this fan's from January of 2017.
Yep this fan came with the house when they got this house.
So yeah this fan works well on all speeds and a light too.
So about to go ahead and demonstrate this fan. Here we go.
