Having been actively involved in the O gauge toy train hobby for some five decades, it isn’t often that I come across something I never knew existed, but while browsing an online auction site recently, I saw the MRC Sound & Power AC unit. I was fully aware of the the regular, DC-output Sound & Power unit, but AC? Can this be used with Lionel Trains?
In 1993, MRC combined these their sound and control products into the Sound & Power DC throttle. What I never knew until recently, was that MRC also made a Sound & Power unit for AC trains. I am assuming that MRC did not make many of the AC units because I do not recall ever seeing any promotional materials for the AC version, and in fact the box uses a photo of the standard DC version.
So now, I have synchronized sound for any locomotive of any era of any manufacturer at any time without having to fool with phone apps or coordinating my phone with the throttle. I can simply turn on my throttle and transmitter, pair the speakers, and I’m ready to roll! Or you can test the system with a stationary speaker if you’re not ready for the full Bluetooth experience. In any case, this is a great solution to add sound without having to modify every locomotive in your fleet. It may not sound quite as nice as today’s digital systems, but it’s certainly an improvement over many of the horn and whistle sounds of previous generations, and the whole installation can cost less than a contemporary sound board. AND it’s a great little power supply for my trains as well!
**As an Amazon Associate and a member of other affiliate networks, We may receive commissions on qualifying sales generated from the links on this channel.***
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
Having been actively involved in the toy train and model railroading hobby for some
five decades, it isn't often that I come across something that I never knew existed.
But while browsing an online auction site recently, I saw the MRC Sound and Power AC
unit. Now, I was fully aware of the regular DC output sound and power unit, but AC?
Hello again, this is Mike with another episode of Toy Train Tips and Tricks.
Let's explore this sound-generating throttle and also ways that we can hack it for modern layout
use. Ever since Lionel Trains introduced the remote-controlled onboard steam whistle on its
trains in 1935, manufacturers have searched for new ways to integrate realistic sound effects
into model railroads. From the Mark's diesel roar, to American Flyer's choo-choo sound,
to Lionel's mighty electronic sound of steam, onboard sound effects of various types were
added to enhance the model railroad experience. The first high-fidelity onboard sound system was
marketed by Pacific Fastmail, or PFM, for use with their brass steam locomotives in the 1970s.
With a properly outfitted locomotive, the system could send very realistic synchronized chuffing
and even quilling whistle sounds through the track to a speaker in the tender. But,
the system was expensive, it required specially modified steam locomotives to work effectively,
and the sound colony was dependent upon clean track. Lionel raised the bar again in 1990
with the introduction of rail sounds and a new race to create more and more realistic sounds was
on. A less expensive option was sound creation outside the locomotive from a fixed source.
Whether from an American Flyer whistling billboard, or Lionel's diesel horn shed,
or even from an LP playing on the household hi-fi, fixed location sound production provided
a sound option for hobbyists on a budget, and that is where this unit fits into the picture.
Since 1947, Model Rectifier Corporation, or MRC, has been producing quality electrical
products for model railroads, especially power supplies for both DC and AC trains.
MRC has also produced a number of sound systems over the years, predominantly off-board sound
controllers that could provide locomotive horn, bell, and whistle sounds, and also some
additional sound effects from speakers mounted around the layout. In 1993, MRC combined these
two products into the Sound & Power DC throttle. What I never knew until recently was that MRC
ALSO made a Sound & Power unit for AC trains. I'm assuming that MRC did not make many of these AC
units because I don't recall ever seeing any promotional materials for the AC version,
and in fact the box uses a photo of the standard DC version. Looking at the unit, the left side is a
typical metal-cased MRC power pack of the time. The rotating knob for variable voltage is red
instead of the usual black to indicate the AC power output. There is also an on-off switch,
a voltage indicator light, a spring-loaded sliding switch to activate traditional Lionel horns and
whistles, an overload indicator, and another sliding switch to interrupt power for directional
control with Lionel reverse units. The power output of the throttle is comparable to a post-war
Lionel 1033 or a modern CW80. Plenty of power for a single train. On the right side is the sound
generator. There is a switch to select either steam or diesel sounds, a knob controls the chuff rate
or the relative number of diesel throbs or steam chuffs that occur as the track voltage increases.
This will change depending on the individual locomotive and how much power it requires to
start and accelerate the motor. You can set it to zero if you don't want any of these sounds at all.
The knob at the right controls the total output volume, both for the chuff sounds and the digital
whistle or horn sounds. A vertical sliding switch controls the pitch and volume of the horn or
whistle sounds. The wiring connections on the back of the unit include two posts for variable voltage
track output, two posts for fixed voltage accessory output, and two posts for speaker output. By the
way, if your Lionel whistles and horns aren't functioning, reverse the track output wires and
should solve the problem. The original unit also came with a 1 watt 8 ohm speaker with 20 feet of
wire. Let's see how it performs. Let's start with the steam sounds. So as you can see as I turn the
knob, the voltage indicator lights up and you can see the difference in the lights on the lighted
caboose. And you can use the onboard whistle if you so choose. Make sure the switch is set to steam
sounds, turn the volume up, and then you will want to adjust your chuff rate. I'm putting it in the
middle to get started, but it can be fine tuned depending on the motor that you're using. As the
voltage increases, so does the chuff sound. Use a combination of the throttle and the chuff rate
control to fine tune the sound to your locomotive. For the digital whistle, use the slide switch.
You can control the volume and the pitch of the whistle by sliding back and forth.
With a little bit of practice you can make a realistic sounding
swiveling whistle sound for your steamer. Now for the diesel sounds. Make sure the switch is
turned over to diesel. You can use the onboard horn if you wish. I find with the diesel sounds
it's best to turn the chuff rate up higher. The diesel sound has a bit of a whine to it. According
to the MRC instructions, they were trying to represent a turbocharger whine on a modern diesel
with that sound. Just like with a steam whistle, sliding the switch gives you control over the
pitch and volume of the horn. While you may like the sounds themselves and the synchronization with
the track voltage, there are some issues with the Sound & Power system. First, the included
8-ohm 1-watt speaker is rather anemic in sound. I first experimented with a larger speaker,
this 8-ohm 20-watt RadioShack model that I had lying around. Yes, RadioShack. That improved the
sound timbre a bit, mainly because of the added size and the baffles, and it improved the volume
slightly. You can get similar results with the original speaker by trying different mounting
arrangements and boxes. The original owner mounted the speaker in an electrical box.
I tried this old plastic container and got some interesting results. In the original instructions,
MRC included a template for cutting the product box into a sound box. In any case, this may be
sufficient volume for an HO or N scale layout, but with our metal wheels and template track,
the sound of any train soon overpowers any of these speaker arrangements. This is likely the
reason that MRC abandoned the Sound & Power 027 system. It was simply not loud enough for
template trains. MRC's instructions say that a second 8-ohm speaker may be added for additional
volume, which may help some, but I have a different solution. This handy device is a
line-level output converter. Often used in automotive audio applications, it converts
our speaker output to a line-level output with a stereo RCA jack, allowing us to connect our
sound generator to almost any audio amplifier. There are five wires, left positive and negative,
right positive and negative, in the ground. Since our output here is mono, I connected the two
positive wires together and the two negative wires together. Without the ground wire, there's
a very loud hum, but I found that attaching the wire to any of the lugs or screws on the unit
cabinet will work sufficiently to ground the sound. For testing, I just used a strip of electrical
tape to hold it into place. Here is my final arrangement. I mounted the box to the throttle
with a small velcro strip for wire management, and I cleaned things up a little bit. To test the
idea, I hooked the throttle up to my home stereo system, and soon the whole house was booming with
steam and diesel sounds. I could have serenaded the whole neighborhood if I wished, but I'm a
nice neighbor. This setup provides more than enough volume for your train sounds,
but it's still sound from a stationary point, and our trains are in motion. So how do we get this
sound to our trains? For this, I devised a twist on my previous Bluetooth sound idea. Instead of
broadcasting the sounds from my phone, which can be difficult to coordinate the phone and the
throttle together, I used this device, a Bluetooth transmitter, to send the signals from my throttle
to my train. Instead of plugging the RCA jack from the throttle into the stereo, I attached it to
this transmitter, which then sends the signal to my Bluetooth speakers. Oh, and I did say speakers,
plural, because I have this new twist on my method as well. A speaker that is small enough to fit
into our train necessarily lacks a bit of volume and clarity, but what about two speakers? This
new variation of the speaker is the same size as the Mo-Mo-Ho speaker that I used in my previous
video, but these can be paired so that both speakers receive the same signal simultaneously.
I can now have twice the volume, and by spreading the speakers apart, it adds a bit of depth to the
overall sound. I can put one speaker in the cab of a steamer and the second in a trailing tender or
even under the containers on a gondola for either steam or diesel sounds.
The speakers will run for about two hours at full volume on a full charge. To pair the speakers,
turn them both on, and then double tap the power button on both speakers at the same time.
After you do this the first time, they will remain linked together.
They will then pair with the Bluetooth transmitter as a single device. You can find the
links to the line converter, the transmitter, and the speakers in the video description.
So now I have synchronized sound for any locomotive, of any era, of any manufacturer,
at any time, without having to fool around with phone apps or coordinating the phone in one hand
with the throttle in the other. I can simply turn on my throttle and transmitter, pair the speakers,
and I'm ready to roll. Or you can test the system with a stationary speaker if you're
not ready yet for the full Bluetooth experience, or if it's a small display layout where a single
speaker would suffice. In any case, this is a great solution to add sound without having to
modify every locomotive in your fleet. It may not sound quite as nice as today's digital systems,
but it's certainly an improvement over many of the horn and whistle sounds of previous generations.
And the whole installation can cost less than a contemporary soundboard.
And it's also a great little power supply for my trains. As for the price, after locating my
example, I did find a few additional examples of the Sound & Power 027 online. Most were priced in
the $150 range, a bit under their original retail price of the 1990s. However, they did not appear
to be actually selling at those prices. I suggest contacting a seller and making what you believe
to be a reasonable offer. It doesn't hurt to ask. I paid less than $50 for mine, shipping included,
but it was a very motivated seller. I got lucky. As always, I hope you enjoyed this video as much
as I enjoyed making it. And if so, please like it, subscribe, leave a comment, and tell your
friends and neighbors. Keep the trains running and the whistles blowing,
and we'll catch you next time on Toy Train Tips and Tricks.