Since the beginning of toy train production in the late 19th Century, O Gauge modelers and operators have faced the perpetual challenge of how to quickly and inexpensively fill in the open holes that represent windows on our Trains. I have a new, and VERY inexpensive way to add realistic-looking windows, windshields, number boards, and headlight lamps to virtually any model. Let’s take a look!
**As an Amazon Associate and a member of other affiliate networks, We may receive commissions on qualifying sales generated from the links on this channel.***
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
Since the beginning of Toy Train production in the late 19th century, modelers and operators
have faced the perpetual challenge of how to quickly and inexpensively fill in the open
holes that represent windows on our models. This is Mike with another episode of Toy Train Tips
and Tricks, and today I have a new and very inexpensive way to add realistic looking
windows, windshields, number boards, and headlight lamps to virtually any model.
Let's take a look. While many higher-priced and well-detailed locomotive cabooses come
complete with clear window inserts, many lower-priced models have these details omitted
as a cost savings. Or, as in the case of my Penn Central F3 shell, a previous owner removed and
misplaced the original window casting. I could search the web for a replacement windshield,
but post-war parts are getting harder to find and more expensive to acquire.
Or, I could simply leave the opening as is and say the glass is so clean it seems to disappear.
One tried-and-true method used by many hobbyists is to cut acrylic sheets and
glue them to the inside of models to represent windows. This works well, but shapes like the
compound curves of EMDE and F models can make it difficult to cut and mount these sheets.
Also, some acrylic materials tend to yellow with age, producing an unsatisfactory effect.
Plus, to me anyway, it always looks like the window pane is behind the opening rather than
inside it. Some hobbyists go even simpler using a simple clear scotch tape. The tape can be applied
over the windows, then trimmed, or can be placed behind the openings, adhesive side out.
The two disadvantages I have found with this method are, first, the tape application can be
very fragile and easily bumped out of place, and second, over time, the adhesive invariably
picks up the dust and dirt from the layout room and eventually needs to be replaced.
Then, there are liquid windows. Two products that are commonly used by HO and N scale modelers
are Tester's Clear Part Cement and Microscale's Micro Crystal Clear.
These products were developed to invisibly glue clear parts together, such as airplane canopies,
but it was soon discovered that, with a little encouragement, these products could also be used
to create small, clear glass windows up to a quarter inch across. I have found these products
work equally well for windows. The Crystal Clear is a little thicker, as in is a PVA cement similar
to Elmer's glue. Use a toothpick to apply the glue to the perimeter of your window,
then reapply a generous amount to the toothpick and pull the material into the center void.
It takes some practice, but after a while, you can get the material to cross over the gap
and make a bubble of sorts. When it dries, a shiny, clear paint of artificial glass is left behind.
But most O scale windows are larger, often much larger than a quarter inch.
So how can this be made to work? My method is to combine the tape and the liquid to make a
double pane window of sorts. The window is still clear, but the liquid window covers the adhesive,
preventing the buildup of dirt and dust. First, a note about the tape. Scotch makes two basic
varieties, transparent and invisible. But don't these two words mean the same thing? Well, no,
they don't. Invisible tape, the green label, has a matte finish so that when it is applied to
standard white paper, the tape matches the finish of the paper and becomes invisible. This should
only be used to represent dirty windows or when you desire a more translucent effect for interior
illumination. Transparent tape, the red label on the other hand, is totally clear, but glossy.
Because of its high sheen, it is detectable on paper, and its high reflectivity is obvious when
documents are copied or scanned. But it makes a very shiny window pane. I apply a strip of tape
to the inside of the model, covering the window openings. Any extra can be cut away with a razor
knife later. But be careful, as the clear shiny tape will show off any imperfections such as
fingerprints. If you find dirt or fingerprints on the tape, tear off another piece and reapply.
It's cheap. Also, try to attach the tape flush with the window perimeters. Do not push the
of the tape into the window openings, as that will leave a visible impression on the finished product.
Once the tape is in place, it's time for the liquid window material. Instead of a toothpick,
I have found a small paintbrush to be ideal here. You only need enough of the liquid glass to cover
the adhesive on the tape and to make a smooth surface across the entire face of the window.
Don't use too much. A thick coat will take longer to dry and may develop imperfections.
Allow the product to dry overnight, and voila! A durable, shiny, clear glass window.
If you need to redo your project, the Micro Crystal Clear is water-soluble,
and the testers dissolves quickly with acetone. But wait, there's more! As I considered the
Microscale Crystal Clean and how it is a PVA cement, I began to think about other adhesives
that are similar to Elmer's School Glue. After all, the testers in Microscale products can cost
$5 to $10 per ounce. Isn't there a cheaper option? A quick jaunt down the craft supply aisle at
Walmart led me to this, Elmer's Clear School Glue, at $1.99 per bottle. Would this work?
I prepped my nickel plate caboose with the red label tape, added some glue with a small q-tip
and let it dry overnight. In the morning, beautiful! It looks just like the Crystal
Clear windows on the NW-2 switcher. The only imperfections I discovered were a few air
bubbles, probably caused by putting it on too thick. So, I taped the rest of the windows and
applied a coat to the remaining windows, this time with a brush. This time, not only were the
bubbles gone and a smooth finish left behind, but the thinner layer dried faster too,
in about 3 hours. I figure that a roll of tape and a bottle of glue, about $5 total investment,
will be enough to add windows to every locomotive and caboose on my roster.
I have a busy winter ahead of me. Now, as I rotate my roster for cleaning and lubrication,
I can add windows at the same time. What do you think? Am I missing an easier or
cheaper method? Am I overlooking something? Leave a comment if you have a thought and,
meanwhile, be sure to subscribe to the channel, like the video, and share it with your friends
and neighbors. This week's episode is a little shorter than normal so that my father and I can
pursue Union Pacific Big Boy No. 4014 across Illinois. Check the community tab for updates
and photos, and I hope to post the video of our trip on my companion channel, the Locomaniac
channel. Until then, close the windows and keep the trains running,
and we'll catch you next time with more toy train tips and tricks.