Putting in a zipper can seem overwhelming and intimidating, but once you sew it using the techniques in this video, you’ll realize how fun it really is and want to make more!
Learn how to cut down a zipper that is too long and how to use zippers by the yard.
What do you get when you combine colorful fabric scraps, a zipper, and the quilt-as-you-go method?
You get a scrappy fabric quilted zipper pouch. I'm Jan Howe. In today's sewing tutorial,
I'm going to show you how to make these cute zipper pouches. In a previous tutorial,
I showed you how to make a zipper pouch, but this zipper pouch has a little bit different design.
I'm going to be showing you a few different techniques and tricks for inserting a zipper
and these zipper tabs. It has a little bit different bottom to it, which I think you'll
really like. If you're enjoying my content, make sure you like and subscribe to the channel.
That way you can be notified when I put new videos up. You'll be the first to be notified
and you don't want to miss out on anything. There's some fun things coming.
Let's begin by going over the materials and items that you'll need for the project.
You'll need the pattern downloaded and printed and I of course will put the link in the description
below. You'll need a piece of fabric for the lining. The rest of the fabric you'll be using
some scraps from your stash. As you can see, I have a bunch of different colors of fabric scraps
that I've been saving. And if you want to check out how I organize my fabric and fabric scraps,
I have a tutorial showing you how to do that. So you might be interested in that.
I have gone through and found some fun pieces that I want to include in my zipper pouch.
They can be different sizes. They can be big or small. You can combine them. You'll need
a sewing machine, of course, a zipper foot, along with a regular sewing foot,
a seam gauge or measuring tape, a turning stick. You'll need a pair of fabric scissors, but I love
using a rotary cutter and a mat. Makes cutting these strips so much more precise and a lot
quicker. Pins or you can use these fabric clips, which I really like. You'll need a zipper that's
at least eight inches long. And I'll be showing you how to shorten a zipper if you want to use a
longer zipper. This wash away wonder fabric tape is really nice and helpful to use.
It's not very, it doesn't cost very much money. I'll put the link in the description below, but it
really does make putting a zipper in a lot easier. You don't need it, of course, but it does come in
handy. You'll need some kind of fabric stabilizer. This is called soft and stable. It's really good
for bags and things just to give it, give your bag some form and stabilize the fabric. You can
also use cotton quilting batting if you want. It will work as well. And you'll need an iron and
ironing board. And of course, if you want to add label to the bag, have that handy. And I have a
tutorial showing you how to make these tags if you want to custom made and they're really easy
to make. Let's start by getting our pieces cut out. I have cut out two of the outer panel
stabilizer pieces. Now the stabilizer is going to be wider than the actual cut of the outer panel
when we get it all sewn together. And these panels are 10 by seven and a half inches. I've
also cut out a bottom panel piece and the bottom panel fabric and that measures 10 by three and a
half inches. You'll cut out a rectangle using the pattern piece and that will be our zipper tabs.
If it's been a while since you've changed your rotary blade, you might want to do that. It just
makes the cutting the strips so much easier and you'll be surprised how much better they cut if
you have a sharp blade. So the strips need to be eight inches long and you can they can be all
sizes. You can combine several strips together but they just need to to at least be eight inches
long. So I'm going to sew this these two together to make one strip and I'm going to sew these two
with this combination. So kind of just play around with your scraps and see what kind of look you
want for both sides and then we'll sew them together. I'm going to sew these two strips
together and then I'll add them to the bottom of that blue piece. To reduce bulk I'm going to open
up that seam. You can just finger press it if you want to or you can use your iron.
All right now that I have my strips cut they're at least eight inches or longer we can always cut
them down and I've decided which order I want them to be in. We're ready to do the quilt as you go
method. I have my stabilizer. Take the first strip that you want to put down place it right side
facing up along the edge. Take your next piece place it right side facing down and I'm just going
to start sewing at the edge of the stabilizer down to the bottom using the press my presser foot as
my guide be a 3-inch seam allowance. Flip that piece over and just hand finger press it open
and then we're going to top stitch just about an eighth of an inch from the edge. I'm going to
increase my stitch to from two and a half to three for top stitching. I'm going to bring it
back up to the top and then put my presser foot along the edge of the stitching there and sew
down again. There's no need to back stitch. We're going to go ahead and quilt this section bring the
presser foot along the edge of the last stitching line and start sewing down again. You want to keep
that fabric on the right pulled over to the right.
Take your next fabric strip place it right side facing down.
This looks like I need another strip.
I'm going to flip it over and come back to this panel that hasn't been quilted yet.
You'll do the same thing for the bottom panel piece. I have my stabilizer. I'm going to clip
it in place just to keep it from shifting until I get halfway through except this time we're going
to sew horizontally. All right so that's the bottom panel. Let's take it all to the cutting
board and square it all up. These outer panels need to be cut nine by six and a half inches.
So if you have one of these square cutters that's great. If not just use your your other ruler.
So let's find that top edge of the foam and get that six and a half inches. Okay so there's one
panel. Let's cut the other one. I have my two panels. The final cut for the bottom panel is
nine inches by two and a half inches. So we'll square that up. Now that we have our panels cut
out and quilted we're going to make our zipper tabs. This is just one piece that we'll cut in half.
The first thing you'll do is fold it in half and press and then we're going to fold it the edge
to the crease. Fold the other edge to the center crease press and then we're going to fold that
in half. Lining up those folded edges cut that in half to make two tabs.
We'll set those aside. Now let's get our zipper ready and you can use a zipper from the store
that is packaged like this. There's a lot of different sizes and colors. You want the zipper
to be one inch shorter than your panel and our panel ends up being nine inches. So we need a
zipper that's at least eight inches or it's good to give yourself some extra like nine inches.
But what I'm going to do is use my zipper by the yard which I really love. On my last tutorial I
showed you a little bit about how to use those and I love them because you can customize the colors
of the zipper pull. This bundle that I got came with a lot of different colors and it's like 36
inches of each color. So it's great, it's wonderful. I'm stocked up for zippers for quite a while.
So I'm using the black zipper. I can choose whatever color of zipper pull since I'm using
having a green tab. I thought it might be kind of fun to have maybe a green zipper pull on that black
zipper. I'm going to cut my zipper to eight inches and when you're cutting over the teeth, if it's
metal teeth, you'll want to be really careful and just cut in between. You kind of have to
zigzag a little bit to cut through those teeth. Plastic teeth are not a problem. We're going to
attach the zipper pull. I'm going to pull the zipper apart. I'm not going to pull it all the way.
The rounded edge of the zipper is where I'll insert the end of the zipper. Just kind of shove
them up in there and you'll hear a little click or you'll feel a little click when it's in place
and then you can start pulling that zipper pull down the zipper. Now we can apply tabs. Your zipper
tab, open it up and place the end of the zipper and fold that over so the folded edges are even.
Put that in place until we get to the sewing machine. I'm just using a regular straight
stitch and I'm going to stitch right on the inside of the fold of the tab
and you want to make sure, turn it over, that you caught both layers. We're good there and let's do
the other side. To keep the thread from bunching up on the other side, you hold the thread, the
needle thread, just for a couple stitches. Take your scissors and clip off the ends of the zipper
tabs even with the edge of the zipper. All right now we get to sew the zipper in. Decide which
edges you want to be on the top. I'm going to use this wonder tape. It really does make this easier
but it's not crucial if you don't have it. Place the right side of the zipper to the right side
of an outer piece. I'm going to apply that strip of tape first so it's sticky on this side and
then we'll pull off a strip of paper and it will be sticky on the other side. So it's basically just
a double-sided tape. When you wash it, it will disappear. Let's peel off the paper and we're going
to place the zipper right side facing down onto the outer piece. I'm going to leave a half inch
on each side. Perfect. Place it along the edge and just stick it down. Now if you didn't want to use
the tape, just simply clip it in place or pin it in place. Apply another piece of tape along the wrong
side of the zipper. Take your lining fabric and line that up with the edge of the zipper. You can pin
or clip it in place. You'll need to grab your zipper foot for your sewing machine. Mine looks like this
and place it on your machine. Since I'll be sewing from the right, I'm going to attach it to this left
bar here. That will allow me to sew really close to the zipper but still have the pressure of the
foot. Make sure that your zipper is unzipped halfway to make sure that you can tell where
the needle is coming down. So it's not going to be really, you don't want it really tight
against the teeth but just maybe about an eighth of an inch away from it. You can do it further
if you want. I'm going to turn my handwheel towards me. That'll bring my needle down
and it, yeah that's probably the right distance. You'll back stitch at the beginning at the end
of the seam. You're going to sew down until you start feeling that zipper pull. Leave your needle
down, lift up your presser foot and reach underneath and pull the zipper towards the other
side out of the way and continue sewing down. Now you'll apply another strip of tape there or just
pin. I'm going to show you what it would look like if you were just using fabric clips. Take the other
lining piece, right side facing down and place it onto the back side of the zipper, making sure
that we have half inch seam allowance. You need to scoot it over just a bit. Take the other lining
piece, the right side facing down, lining up the top and the edges. So you can see how that tape
does come in handy. Kind of keeps, when you're working with three layers like this, kind of have
to keep putting the, reattaching the pins. But see how it's, it's still very doable. And of course you
could always use pins. Now that we're all clipped in place, we're going to do that same thing. Sew all
the way down, adjusting that zipper pull. I'm going to bring it down a little bit.
Zip that up a little bit. And now we're going to top stitch. We're going to press that seam towards
the panel. I'm going to pull the lining away, getting a good edge there and give it a press.
I'm going to sew in the same stitching that I did on my zipper tab. I'm just leaving my zipper foot
on, hold that top thread for just a few stitches. Come to the corner, leave my needle down, lift up
my presser foot, pivot, make sure that's pulled tight. See how nice that looks. All right, onto the
next step. Now we need to sew the bottom panel onto the front panel. Pin it in place, just sew all
the way down using a 3-8 inch seam allowance. And the 3-8 inch seam allowance will be the edge of
the presser foot here. Fold the other panel, front panel up, line up the bottom edges, and do the
same thing. All right, the next thing we're going to do is sew it all together. Take that bottom
panel, just let it fold in on itself, lining up the seams, and clip it in place. If you want to add a
label to the outside of the bag, take your label. I have a tutorial showing you how to make these cute
labels. You can do letters or I have different designs. I'll put the link in the description
below. But this is the time that you want to apply that. You could even apply it before
we sewed onto the bottom panel. But you'll take the folded, these are the cut edges, you'll take
the folded edge and place it inside. And you want to make sure that you leave enough for the seam
allowance and so it's not cutting, we're not sewing into the design. And then I'll baste it in
place. And this is what's really important is that we line these, we get these seams lined up.
We're going to take the zipper tab, push it towards the lining. See how that looks like that? And line
up that main seam. I like using a pin at this point, it keeps it I think a little better aligned.
Now the lining piece, we're bringing right sides together as well. We're going to leave a portion
of the bottom unsewn so that we can turn it right side out when we're finished. And I like using two
straight pins to help me remember not to sew it closed. So it's about a three inch, three to four
inch opening. And then I'll clip the rest in place. Do that same thing, push the zipper tab towards
the lining, lining up those seams. I'm just leaving my zipper foot on and the edge of this zipper foot
I'm going to place along the edge of the fabric. That'll be my guide. It'll be a three-eighths inch
seam allowance. Into the corner, leave your needle down, lift up your presser foot and pivot. And we
start getting close to that seam. I want to just take a little look again to make sure that we're
all lined up. There's a lot of bulk here. This, the zipper tab edge, it is about right there. We don't
want to sew into the zipper tab. Just start sewing slowly. You can feel the bulk of the zipper tab
right there. You don't want to sew into it, but you want to keep the same seam allowance.
Sometimes you'll have to lift up your presser foot and tuck. It will get caught on your zipper
foot a little bit. Sometimes you need to get your little scissors or your pointer tool and push that
down and hold it while you sew. Your edges are still staying even.
And we're just going to sew all the way off. We're not even going to, we don't even need to sew on
this bottom part. The other side and sew down. Clip the corners to get rid of a little bit more
of the bulk. I'm going to taper that down. I'm also going to trim down this to make the bottom pleats
on the lining. Take the sides on each side of the lining corners there. Pull them apart and kind of
feel with your fingers where the seams line up. I'm going to put this on my cutting mat and I'm
going to find where that point is. So the point is not here. If I were to draw, extend that out,
the point would be right there. Line that up with this line. Take my another ruler,
measuring down from that point, that one inch, and just draw a line. Pin that in place.
Let's get the other one ready so that we can do both at the same time.
Take it to the sewing machine and sew along that line. Leave a quarter inch seam allowance and clip
off that corner. And then that will give you that nice boxed corner for your lining. Now here's the
fun part. We're going to reach in, turn that right side facing out. Luckily we've left that open so
we can just stuff it all back down. We're going to pull the lining out though. Take a turning stick,
stick it into the hole of the lining, and poke out the corners of that bottom panel. Isn't that
just a cute design? A little bit different than just having a square bottom. I'm going to poke out
where the zipper tabs are. It'll look like that and you just kind of push it up. Pretty cute,
aren't they? Now we need to sew the bottom of the lining closed, pleated bottom. And I like to just
stick my fingers inside and pull, give it a little pull. The fabric will naturally curl underneath.
You want to do it the same seam allowance as the rest of the seam. So I'm going to pull that open. I'm
going to press that and then just top stitch an eighth of an inch down that opening. Now all you
do is stuff the lining down into your pouch. There you have it. What a fun project. What a great way
to use up all your fun fabric quilting scraps. A little bit of a twist to the bottom of your
zipper pouch. If you enjoyed that tutorial, give it a thumbs up, like, and subscribe to the channel.
Be sure to check out my other tutorials and my website youmakeitsimple.com for other
fun crafting and sewing ideas and projects. And as always, if you have a comment or a question,
be sure to leave that in the comment section below. Have a great day, have fun sewing, and we'll see
in the next tutorial.