Acrylic pouring- Get started with knowing what you NEED to know for the END TO END process

2D Digital Painting
12 followers
Mar 2, 2026
Hello everyone, welcome to my channel. Normally I don't talk in my videos and I only give you
inspiration by showing my painting process, but today I want to give you a little one-on-one
to be known before you actually start pouring. It's a very new art form and there's a lot of
new beginners who read posts and blogs and facebook groups and there is a lot of confusion about
what is actually what, what do you need, how do you do it, but also simply why we do it.
So I think that's really some information that's mainly missing. So I want to talk about paint,
how paint is set up, pouring medium, consistency, that kind of things. I want to keep it short,
so if you want to learn more there's also a beginner's playlist with some more information
on the topics I talk about. So if you go to the shop you also have, you need acrylic paint
obviously, but then you stand there and you have heavy body, soft body, fluids and yeah, what is it?
Look, fluid, fluid, very droppy, very nice for our art form already. Then you have some craft paints
who are a bit more like this type of consistency and then you have some that you squeeze out of
the bottle because they're more like this type of consistency. So one of the main questions
that come from beginners is how much water and how much pouring medium do I have to have,
you have to add. Look at it, nobody can tell you. If they tell you one spoon pouring medium,
one spoon water to this, that's what will get really really runny. This might be okay and this
might be still way too thick. So there are some rules and some things that of course you can do
experiments with, but nobody can tell you how much. You can tell you though some general rules.
In general, you should not add more than 30 percent pouring medium or you should not
add a lot of water. Again, matter of opinion, there are people who do it only with water,
but I'm now going to show you why this is fine for yourself or playing around
for this type of things, but if you want to go a bit more quality or even sell,
I show you why it doesn't. It's not a good idea. So normally paint has pigments, right?
And then it has a binder connecting these nicely sharp tight that they don't fall apart.
Now adding water, we're obviously making the binder thinner. So let's say this is 10 percent
water. We're still good. Now imagine we do 50 percent of water. This gets very long
and you will break the connection. It doesn't mean that the painting will look much different
and that's why there's a misperception, because the pigments obviously are still there,
but over long term it's not a stable connection. And that's also why we use pouring medium.
So what does pouring medium do? You have the pigments, and yes, we add water, so we stretch
them, but we also add an additional layer of binder. So we will have more liquidity,
it will be more fluid, but it will also stay stable. But of course you cannot totally extend
this to how far you like, but depending on your paint or your pigmentation, you can get it in
the correct consistency. Okay, so this water plus pouring medium 30 percent is still a stable
connection. Now the talk about pouring medium is also confusing, because that word pouring medium
was originally like for ready-made things like Liquitex or Golden, where it says pouring medium.
This is not the same when you buy gloss medium or something like that. Pouring medium has
everything it needs to make paint fluid, but it's also very expensive. So people were looking around
like what else can we use and came up with PVA, because it is like a binder that is also used in
and Floetrol, because it's used in the stuff when you paint a wall and you want it to have a longer
opening time. People use Floetrol to do that on the big scale. PVA, yeah, sounds complicated,
is actually glue. If you read something about glue, it's PVA. But PVA is not archival,
so if you want to go again for it's perfectly fine, it works perfect, whatever. But if you're
really concerned about quality, PVA is not archival. If you look into PVC, that's archival,
because that's the stuff that is made for, that's used for make paint. Okay, on this,
on the pouring medium, I also have another video. Now, consistency. I already showed this,
you can, you need to get the right consistency to do the pour. So this is actually the most
important part, because it will not work if you have the wrong consistency. If it is too thick,
and the standard is like a flip cup or a dirty pour where you put silicone or dimethicone,
if it's too thick, let's imagine this is the paint, and here's your canvas,
your silicone is trapped under here. So yeah, you will have a little bit on top,
but the rest will sit there. And you move it and you move it and just gets a little fuzzy,
but you won't have cells. Now, if it's too thin, you pour it on your canvas and it directly goes
you know, sorry, I don't have a better word for that, it's spread out, and the silicone is
immediately like a layer on top, but it didn't do anything to your paint. Because the intention of
silicone is to push through the layers of paint, and by doing that, look, now you have nice paint,
here is the silicone, and it will create a cell by raising to the top. You use heat to
pull out the rest from the layers below, so you can do that, you will get more cells,
or you don't do that, and you have only the cells that come to the top automatically.
Okay, so that's the consistency. Okay, now imagine your pour is done,
your silicone cells are on the top, you think, oh, that feels dry, normally after 48 hours,
feels dry, let's varnish, or let's clean it. Why do you need to clean it? Imagine like a
cooking pan, right, so you have a cooking pan, you baked something, yeah, and there is nice
oily stuff swimming here, so you don't just take a cold wipe and carefully wipe that off,
the oil will not come off, right, so you need to find another option to really remove the oil,
otherwise the varnish you use will not stick, also resin will not, it needs to be fully clean.
I have a video about the three options how to clean it, but you can imagine if you think about
your cooking pan, you really need to pay really good attention to that, it can't be cold watered,
if you do it with dish soap, it needs to be warm, you really need to wash it,
and if you don't wait enough, like three weeks, you will wash the paint off, because it's not dry,
it's not dry from below, and that also happens when you varnish, people varnish and it's not dry,
yeah, and they get all this little cracky stuff, and why is that? Because it's not dry underneath,
so the density, or how they call that, the not dry, it still tries to evaporate out,
and it pushes against the varnish and cracks it, so that's why you need to a. clean it,
let it sit again, because also from cleaning it's a bit wet, and then after three weeks you
can varnish it, yeah, and they should be good. I have a video about varnishing, because there's
of course many many products, many options, I prefer to thin it down a bit for the first layer,
it needs to be thin, you can repeat it multiple times, I have no experience on resin, so don't
ask, I have no idea, and I think these are the main steps that you need for acrylic pouring,
so now have fun, experiment a lot, it's very very addictive, so look at your money if you have it or
not, and yeah, I can only say it's very important to educate yourself before you do anything,
because I have people in forums that bought this, and this, and this, and this, and they didn't know
that it's or this, or this, or this, so they ended up spending a lot of money with stuff they didn't
need. So give it a thumbs up, comment something nice, I know there's different matter, it's a
matter of opinion, and there's also many different ways, but this is my advice, and have fun!
Thanks for watching, bye-bye!
