The Garage project is finished, finally! What started as a plan to build an open carport quickly escalated into a fully enclosed, concrete-floor garage. In truth, we needed somewhere to store all our furniture from the house over Winter while we finished re-stumping and laying new flooring for our living, dining and kitchen. As it turns out, all these projects take time - so here we are, one year later, and happy to say it is finally all finished.
Do you have a product you want us to review? 👉 SEND TO: Attn: Jonno Rodd Hunting for George Parcel Collect 10103 33142 350 Orrong Road Caulfield North 3161 Victoria, Australia
Welcome back to the neglected garage project.
I think it's time we actually put some work in and get this thing finished.
Are you building me a carport or what?
Yeah, we're building a little carport.
How long is that going to take?
I don't know. We've already spent half a day just moving a tree.
This garage project dragged on a little bit longer than planned,
but it's finally all done.
So I thought I'd put it all together.
So let's take it from the top and stick around,
because the fit out at the end is the best part.
Yeah, sweet. Part one complete.
Then it was on to the foundations, dug the holes,
measured one too many times, then lined them up and got the concrete in.
Not the most exciting part of the build.
But if this isn't right, nothing else is going to be.
Not bad for one day's work.
The next day, once our concrete had set,
it was good timing that our timber delivery turned up.
Pretty standard.
All the timber that we need first is right at the bottom of the pack.
Got it all unloaded, sorted it,
then started stacking the pieces ready for the build.
Saves a bit of time later when you're not hunting through piles of timber
or trying to grab stuff off the bottom again.
This is just going to be a basic skillion roof garage.
So to work out the angle of our roof, we're just clamping a bit of timber
and eyeballing it to make sure that it's going to look good.
I can't remember exactly what angle we settled on,
but we made sure to double check the heights at the back of the garage
to make sure that we had enough headroom for shelving the car,
the tractor down the track.
Didn't want to end up building something that we couldn't fit other stuff in later.
That's good. It's nice, clean.
The entrance side, I ordered posts for the final height that I wanted.
So we only needed to cut down the middle and back posts once we have this set.
Got all the rafters in.
So just putting some nogs in between each one.
Then we'll get some battens on the roof and hopefully our roof sheets turn up soon.
While we're waiting for another delivery, we got working on the walls.
We decided it's best to get some strapping on the walls at this stage as well.
But definitely best practice to get these three walls
tension up with a bit of cross bracing before we sheet the external walls.
For the external cladding,
I had some leftover sheets of this textured cement sheeting.
I think it looks very sleek and clean once it's all painted.
It's a bit heavy and awkward to move around on your own,
but a super easy product to work with and a very quick and easy way
to get this all clad and sealed up.
All right, it's time to get some paint on this thing
and then hopefully tomorrow we can get the roof on.
Before any color went on, everything got a heavy coat of primer.
A couple of reasons to use primer first.
These sheets are not pre-primed, but it also helps with the coverage of the color.
You'll use a lot less paint if you have a solid base of primer underneath.
And it's also going to help the paint stick and last a lot longer.
It's looking better.
Getting some color down is always way more satisfying.
Good coverage and way quicker using a spray gun.
I love this thing.
That old water tank was right in the way the whole time.
It's going to go at some stage, but not tonight.
We're going to need it for a little bit longer.
OK, so the weather turned fast.
Wind, rain, everything.
Probably the worst day to start sheeting a roof.
But we'd already started, so we've got to keep going.
Sheeting a roof is never a fun job.
Heavy, awkward and the wind didn't help a bit.
But once they were fixed down, it finally felt like a proper garage.
Apart from that one little accident with the sheet,
we did manage to get the sheets on and screwed down, which is a big win for today.
Don't know if you can tell, but I'm covered in dust again
because we're back on the carport.
And this time we've decided to put a slab down.
At this stage of the project, we'd already pushed it further
than a basic open carport that I'd first planned.
So we got everything as level as possible.
It was back out of the Kubota.
We got some rock down.
Make sure it was all compacted, level and ready for a concrete delivery.
Should we call the concrete truck to try and book it for tomorrow still?
I haven't called him.
Oh, good day, mate.
My name's Jono. How are you going?
I spoke to someone yesterday.
I was going to try and organise four metres of concrete.
Good old site manager Dusty, keeping an eye on things.
You're not in the way at all, mate.
She's bloody level, mate.
Yeah, mate.
All right. Concrete truck's booked.
See you in the morning.
We've got a delivery coming out this morning.
Can I add another half metre to it?
Cool. Awesome. Thanks a lot.
All right. Better get to it.
Tick tock.
This is what happens when a project blows out to an even bigger project.
All right. Another last minute decision or change of plans.
I decided to get a little extra slab down the side.
A handy spot to put the bins or a temporary water tank
down the track.
Not exactly sure what I'm going to do with it yet,
but might as well do it while we're here.
Time to wait for the concrete truck to arrive.
Concrete is hard work.
Benny told me it would be easy if we could do it ourselves.
So I let him do most of the work.
Once it cured, I wasted no time filling it with gear.
Welcome back to the neglected garage project.
So you can tell it's a bit of a mess in here.
I've got tools. I've got a microwave.
I've got a fridge over there.
I've got all sorts of random stuff.
I've still got bits and pieces from the house.
I've actually got Lucy's record station up there.
So there's a few things that need to go back in the house
before we can get onto today's project.
And today's project is a bit of a fun one because it's a MySpace project.
I've got some epic storage solutions sitting out there on pallets
that I'll get in here later.
But first, I've got to finish cladding the walls
so I don't have to move stuff again because I hate putting stuff in,
pulling stuff out.
Problem with this joint was we built it just before winter
and we moved all the furniture out of the house into here to store it.
While we restumped and refloored inside.
I'll get the rest of this wall sheeting on for at least that wall
and then we can start building this solution.
So might be time to pack up some stuff.
That took way longer than expected.
I've got one wall clean, tidied up.
Everything sort of put away.
You know what happens when you reno?
You accumulate stuff.
You get lazy at keeping stuff neat.
That side of the garage is completely full of stuff.
But once I get this wall clad and then some racking and stuff put up,
we've got to start organising stuff and getting it away.
I'm hoping once this whole thing's done, I can keep it nice and neat.
So the plan today is to try and get this wall sheeted,
get the racking up and then assemble these cabinets.
This is a new product from Australian Panels.
It's the Structure Panel Tongue and Groove VJ150.
It is quite similar in its look to the Easy Craft Panels
that we use in the interior of our home.
We usually go for a VJ100.
The biggest difference is what it's made out of.
It's actually made out of the same stuff that Yellow Tongue's made out of.
And it's in a 12mm thick panel.
So it's a little bit stronger.
It's better for screwing into.
It's not made out of MDF like the internal rated panels are.
Perfect for a garage space like this.
2400 by 1200 sheets.
Go up super quick with the tongue and groove.
Awesome product. Super stoked with how this is coming along.
Alright, so they're flat pack.
Kill. I've got 1, 2, 3, 4...
I don't know. I've got about 20 boxes I've got to assemble.
I've got my racking up just to check my heights.
And I haven't clad that last section of the wall.
Only because I wasn't 100% sure on my measurements and planning of this thing.
I've got two big bays.
They're, what, 1900 bays.
1872 beams, about 1900.
And then I've got a short one for a little double stacker.
It's going to fit.
Just don't know how much room I'm going to have back there.
I want to get this wall 90% and I will clad that wall.
Then I can put some of this stuff away and we can start working on the other two walls.
But let's open up a box.
This stuff is all really heavy as well.
Heavy is good. It means solid.
A good tip when putting together flat pack is make sure you've got plenty of space.
Lay out all of your similar components together.
Grab your instructions.
Work out which bit has to be done before the next bit
because often you start putting them together.
Then you realise you have to pull it apart to put it back together again.
So make a plan.
Get one type of box done, then repeat for all of the same ones.
Then move on to the next one.
You kind of get into a bit of a rhythm putting them together.
So I tackled all of the drawer inserts first.
Then I put the box together.
Then I lined them all up with the casters on the ground,
put the drawer runners in and put the drawers in place.
Then I moved on to the different sized boxes
because they're just a little bit different to put together.
Now just got to get the drawers in there, put the sliders in.
She's done.
And do it three more times.
Oh, my goodness.
Organising stuff takes way longer than you think.
But I think this has turned out awesome.
You'll see all the great Racket gear that we've put in here.
Racking system, the drawer system, the single drawers, the double drawers.
Huge thank you to Racket for sponsoring this video.
It's been a massive game changer.
They've got a really cool little online design tool so you can draw it all up.
I might put a screenshot of what I did
because I spent hours on the thing with my measurements
to make sure that I was going to be able to fit as much in as possible
and get my heights and stuff right.
So like, as you can see, this is as high as you can go.
Didn't design it on purpose,
but at the back, because I've got a right ceiling, it just fit, which is awesome.
And then the width, I've literally got,
I think I've got 20mm at each end of this one, which is so good.
It's just perfect fit.
But yeah, this stuff, it's great.
There's so many racking systems available.
But unless you go like pallet racking for really heavy duty stuff,
some of the other stuff's a little bit flimsy.
I find that this stuff, this is the bigger system.
So you can see that these crossbars are much taller for the bigger span.
But also I think it says somewhere there's a load rating,
so it can actually take a lot of weight.
I've got a bit of camera gear like stands, overhead rigs,
lighting gear tucked up there.
We've got really heavy tubs down here full of paint, full of tiles.
All these drawers of Lucy's are full of heavy stuff.
Piles, colourbomb samples, timber samples, decking samples.
It's great and it doesn't move.
It's super solid, rock solid.
Love this stuff.
I have used a lot of the other racking systems before.
I've got some in my trailer because it was cheap and quick and easy,
but it's not as solid.
I haven't bolted this down to the ground, but I have,
especially on those big walls, I have put a couple of screws into the wall
just so, it's not that it's going to fall over,
but just so it doesn't wobble or anything.
I put a bit of yellow tongue up as like a ceiling, I suppose,
and got downlights installed.
Great little backdrop, extra light.
Not a heap of lighting in here.
It's not bad.
I'm still working out what I'm going to do with the ceiling light.
I'm testing out a couple of different style LED buttons.
I'm kind of liking these ones at the moment.
I don't know what they are.
I'll find out, but they kind of plug together
and you could just have like a whole row of them.
These other ones I've got up there have been a bit temperamental.
So just working out different things.
But this is great.
So an overhead lighting, if you're working on anything,
super important to be able to see what you're doing.
Also, when Lucy's in here,
she's trying to work out what we're doing for another project
and then like the exterior of the house at the moment.
So she's got exterior cladding samples, colour bond samples, timber samples,
and you can see everything what you're doing,
because I'll show you without it on.
Quite dark, quite different.
Like you can still see, but way better.
So, yeah, pretty happy with this.
Why don't we have a quick look around the different little stations
and we'll show you kind of what we've got going on.
So we've got our racking up.
I got all the drawers together.
These drawers are the best thing ever for hiding stuff away,
but also getting things super organised.
Some of them are still empty.
That's great because there's still more stuff to put away.
But I think I've got it to a point where it's nice and neat.
I've got tools and sort of workshop-y stuff here.
I've got some pegboard up.
Awesome use of space for when you want to just grab stuff quick and easy.
I was using this yesterday to take those little plugs off the windows.
You know, when something's missing, like my other little square,
because I was also using that yesterday.
I've got some other tools and bits and pieces to find.
I've got stuff stashed in like little tool bags, my tool belt,
but things I use all the time.
Awesome to have a great little charging station set up.
So you know that batteries are charged, batteries are on charge.
The most used tool in any space.
Blower. Keep it clean.
Do get a lot of wind coming in here.
It's always filthy.
I don't know. What can we go through?
Probably show you some of the drawers.
Keep all my hardware.
So I've got screws, plaster screws, wood screws, gyprock screws.
Here I have bugle screws.
All the different sizes.
I've got concrete screws, tech screws, stainless steel screws.
You can just see it all.
I kind of like these guys packaging as well.
The screws guys.
Not sponsored.
Just order stuff in bulk from them when I need it.
And then it goes nice.
Come in cardboard boxes.
So you don't end up with millions of plastic containers.
Kind of a pain.
More bulk storage.
I've got glues.
No more gaps.
Liquid nails, tubes and sausages.
Super handy just to know that you've got it on hand.
When you're doing something that needs liquid nails, you go through so much of it.
What else is in here?
That's just a junk drawer at the moment.
Good to be able to lock stuff away.
Not really going to go through here because it's not organized yet.
But I've kind of got car cleaning stuff in here and chemicals.
So stuff that you want up high and lockable.
So for the time being, this is kind of my wall.
I have tools, hardware, nails and sanding.
I like having things in groups.
I've got saws and caulking.
Big sander.
Extra blades.
That type of thing.
Kind of my junk drawer.
Charging. Well, not charging.
This is sort of camera stuff because we are using this space
as a bit of a shooting space at the moment.
So I've got extra camera stuff, batteries, charges.
Obviously, I've got PowerPoints kind of everywhere.
I like to have my PowerPoints at the sides of the benches.
But I've got more over here, obviously, because this is my charging station.
You can see there's a light on these.
If these are charged or not, they're all off at the moment.
Let's turn them all on.
Boom. Light up. That's charged.
Useful sort of tool storage.
I just got this off online.
If you're ever doing any grinding work, you're going to need a flappy disk.
But you're also going to need a cutting disk.
Multiples of each makes it much easier and quicker when you're doing stuff.
Tools you use every single day.
I like these little cabinets.
I just repainted it because it got destroyed in the other garage
because it was birds coming in and out.
But yeah, paint, glue, cans, things you don't want the kids to get to.
Hide it away.
Charges. Awesome.
Extra hardware. Blades.
So when you're ever looking for them, you know where they are.
Things you use all the time.
Pliers. Different sized pliers. Screwdrivers.
One awesome thing I found online.
These just come from your little Chinese store or eBay.
Magnetic hooks. Look at this. So good.
They go anywhere.
They're actually really, really strong.
Love them. Like two bucks for a pack of ten or something.
So with all the drawers, I've got them all on casters.
Makes it super handy if you want to get out,
if you need to clean behind them.
Oh, look, if you drop something down behind like that,
like a little thing of hardware, you can get it out.
Or if you want to rearrange and move things around at a later date,
makes it super easy.
I love having kind of everything on casters.
I've had these back in.
When they're locked, they don't move.
In other spaces and stuff, I've made like work benches and stuff.
And I've always put them on casters
because you never know where you want to have stuff
or if you need to move things to work on bigger things or use it as a bench top.
Like you could even put a bit of timber or something on the top of these.
I mean, I've probably got enough room.
I could probably put a bit of yellow tone on the top of them
and then they're like little mobile work benches.
But also for things like this, because I have maxed out the space.
This one is also a double tower.
It's all bolted together.
What I've done is I've put that on wheels as well,
because you can't actually get to this drawer with that in there.
Not that it matters, because some of this stuff is just like bulk storage
or like long term storage.
To be honest, I haven't actually put anything in these yet.
The thing is, I did design it so Lucy's car can still go in here.
That's a big thing.
Lucy can park in here.
I can park somewhere else.
But then when there's no car in here, you've got plenty of space to do things.
All right, let's put this back.
Don't crash.
Like how good having things on casters?
The racket guys have like all these little other attachments and stuff.
Like they've got the pegboards.
I was going to go double pegboard
and then I realized power points are going to be a problem.
I've got another set of pegboards that I might put on here.
These hooks are so good.
They just like bang in the same way that your crossbars bang in.
These things just fastened in like that and you can move them around.
And then there's another type of bracket that goes on here
and creates these hooks on the side.
So this is kind of often wasted space.
I have in the past, like infilled them with timber.
But yeah, great.
Love these little hooks, singles and doubles.
Tools over there.
Lucy's space over here.
We've just got some pinboard.
We've used this so many times.
We used to use this in our office, in our warehouse, in our home office.
Lucy loves using it for having stuff like right in front of her.
That is our current kitchen.
No, it's actually our kitchen design.
How cool? Never noticed.
So you'll notice that I did finish sheeting all of the walls.
This stuff, great for garage spaces.
It's very similar to the internal VJ product from Easy Craft.
It's a VJ 150.
So that's the 150 spacing.
But it's actually a 12 mil thick chipboard style.
It's like it's the same as Yellow Tongue.
It's the same product as Yellow Tongue.
So it's a little bit waterproof.
It's good for like garage spaces, like not finished internal spaces.
I think it looks good unpainted, unfinished.
I don't think you need to paint it because it is 12 mil.
It's a bit stronger than the VJ stuff, which is like an MDF substrate.
You can screw into that stuff.
You can screw into this stuff way easier.
Like I put screws in for all of my charging things
and it makes it super easy to move stuff around.
So that's the space. How good?
What do we got over here?
More sort of storage, a bit more open storage stuff.
I designed this side to be a bit more open.
We obviously, we've got the extra fridge.
We've got the deep freeze.
Got a little server cabinet.
Got the Starlink on the roof of this building, which is good.
Keep it separate from the house
because we haven't done the new roof on the house.
We haven't done the external cladding on the house.
But this building is finished.
But yeah, this side, I just kind of kept it open.
I do want to put a pedestrian door in here.
That's why I've left this gap.
I think there's enough room.
Actually, no, I designed it.
I did it on my little plant.
So there's definitely enough room.
There's enough room for a pedestrian door here.
And then straight out from there is the laundry door.
So it's like a side entrance.
Park, come in, park the car.
Put your bulk storage, the extra drink supplies.
Put your extra overflow, food.
Come out, grab something out of the freezer for dinner.
Fully stocked. How good?
Kid's station.
Extra stuff that just doesn't fit anywhere.
And then up here, I've just got,
this is like the tabletop that we use
when we're shooting top-down design studio stuff with Lucy.
And we just set it up along here.
So it all just fits up there,
tucks away nicely off the ground.
I hate having stuff on the ground.
Imagine if it flooded.
I've had places flood before.
Anything touching the ground gets destroyed.
So it's always good to have stuff off the ground.
This one, obviously, we've just got the open shelving,
the mesh shelving style stuff.
Beach stuff, shopping bags, other things.
More kid's stuff.
Oh, garlic.
Garlic and sunscreen.
No, random mixed bag of random things.
The garlic, I think we were meant to plant
a couple of months ago.
Yeah, bulk storage of toilet paper.
All of the stuff you don't want in the house.
You also don't want to just chuck it on the ground
or push it in a corner,
because you need to be able to see if you're getting low.
That's not even open.
That's brand new.
How good.
Fully stocked.
I did put a little bit of a display feature.
Got a couple of old boards up there.
Well, not old boards,
just boards that don't get used every day.
Got an old rocket wire.
Got a little black beauty for the bigger days.
A little fun single pin I used to surf a while ago.
Don't really surf it anymore.
But yeah, that's it.
I reckon it's turned out sick.
Super happy.
So that's the garage project done and dusted, finally.
I hope so, for now.
Having everything a little bit organized,
just gonna help me do things a little bit faster.
Kinda had some time off.
We had another kid, you know.
These things happen.
Things slow down.
Things get messy, like you saw
when I was living and eating out of here
while I was doing the floor last winter.
But the goal is to try and keep this place neat and tidy.
Everything's got its place on the wall, in a drawer,
you know, so no excuses.
So let me know what you think in the comments below
and make sure you like this video, subscribe,
because I am working on something bigger
and more exciting outside.
I've got a few more projects inside to finish.
And now that I know where all my stuff is,
like, actually, I just found where all my door hardware is.
So I can finish off those things inside,
which I've just been putting off for way too long.
But that's it for this one.
Hope you'll enjoy.
See you in the next one.