The #1073 Pennsylvania Torpedo Train set was the lowest-priced set listed in the 1940 Lionel O and O27 gauge train catalog. You could get this modern -looking #1668 2-6-2 torpedo steamer, a tender, a #1679 baby Ruth boxcar, a #1680 Shell tank car, and a #1682 caboose with track and a 35 watt transformer for $7.95. Or you could upgrade to a whistle tender like this one and a more powerful 60 watt transformer with whistle control button for $11.75. While that seems dirt cheap to us today, the average American worker in 1940 earned approximately $24 a week, making even this bottom-of-the-heap set quite an investment for the average family.
**As an Amazon Associate and a member of other affiliate networks, We may receive commissions on qualifying sales generated from the links on this channel.***
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
Nothing says pre-war Lionel trains quite like the number 1668 torpedo locomotive
on this episode of Toy Train Tips and Tricks. And hello again, this is Mike, and recently I
ventured outside my comfort zone and acquired my first Lionel pre-war locomotive and cars.
The set was listed as untested and for parts, but it didn't look all that bad, and the price seemed
reasonable, so I thought I'd take a chance, placed a bid, and to my surprise, I won. The number 1073
Pennsylvania torpedo set was the lowest priced 027 set in the 1940 catalog. You could get this
modern, sleek-looking number 1668 262 steam locomotive, tender the number 1679 baby Ruth box
car, the number 1680 shell tank car, and the number 1682 Lionel caboose for $7.95. Or you could upgrade
to the version with the whistle tender, like this one, and a 60-watt transformer with a whistle
controller rather than the standard 35-watt transformer for $11.75. And while that may seem
dirt cheap to us today, remember that in 1940 the average American worker made about $24 a week, so
even this low price was quite a financial chunk for the average American family at the time. Lionel
and the late pre-war era seemed to be moving in two different directions at once. The 1940 catalog
boasted of the scale, detailing, and realism found in the firm's locomotives like the Hiawatha,
Union Pacific M10000, the Class B6 060 Switcher, and of course, the mighty scale Hudsons.
Even in the basic 027 line, the locomotives were pretty faithful representations of actual steam
locomotives with satisfactory levels of detail. Rolling stock trailing these locomotives featured
unrealistic latch couplers, or at best, the upgraded electromatic box type, toy-like trucks,
and tab and slot template construction. The 1600 series of cars, based on tooling acquired from
Ives Trains when that firm went bankrupt, even featured tin lithography instead of Lionel's
usual embossed details and baked enamel finish. The set is a perfect example of Lionel's split
personality at the time. The locomotive, while not a true scale model, is a very good representation
of a modern real-life Pennsylvania streamlined K4 locomotive nicknamed the Torpedo. But the
rolling stock behind the die-cast steamer consists entirely of Ives-derived tin lithographed cars with
latch couplers, unrealistic pre-war trucks, tab and slot metal construction, and toy-like tin
lithographed graphics. By the way, what's a Lionel train set of the 1940s and 1950s without a
baby Ruth boxcar? So this set checks off all of the boxes of what you would expect to find in a
mid-century Lionel train set, from the die-cast steam locomotive with whistle to the baby Ruth
boxcar and beyond. Like toy train manufacturers, real railroads were struggling financially during
the Great Depression, particularly in the area of passenger rail. Railroads began looking for ways
to reduce costs and also to inspire more travelers to take the rails. In 1934, Union Pacific introduced
its Art Deco-inspired, sneak-looking, lightweight, diesel-powered City of Salina M10,000 train set.
Meanwhile, competitors Chicago, Birmingham, and Quincy unveiled their own lightweight diesel
streamliner, the Pioneer Zephyr. Both trains were futuristic, comfortable, and fast, often operating
at speeds in excess of 100 miles an hour. More importantly for the railroads, their lightweight
and dependable diesel power reduced fuel and maintenance costs. Inspired by the publicity from
these new streamliners, other railroads quickly followed with streamlined shrouds applied to steam
locomotives. New York Central's Commodore Vanderbilt streamlined steamer was soon joined by the Milwaukee
Road's Hiawatha, B&O's Royal Blue, Redding's Crusader, and others. The Pennsylvania Railroad
joined the party in 1936 as K4 Pacific No. 3768 was restyled with streamlining by famed
industrial designer Raymond Lowy. The smooth, rounded appearance of the locomotive led to it
being nicknamed the Torpedo. Often powering the Pensy's flagship Broadway Limited, the distinctive
locomotive generated lots of press attention and was even featured in a major motion picture.
With other streamliners already in the catalog, such as the Commodore Vanderbilt, Hiawatha, and
City of Salina, Lionel nevertheless saw a marketing and sales opportunity in the Torpedo
and quickly introduced their own model, or actually models. First was the No. 238E, a 442
steamer introduced in 1936 for the O-Gage line and produced through 1940. It headed both freight
and passenger sets and came with or without a whistle and was painted gunmetal gray until 1939
when it switched to black. Also in 1936, the No. 1688 242 steamer brought the same distinctive
torpedo shape to the Lionel Jr. line, a low-priced line to appeal to struggling families during the
Depression. Usually found in gunmetal gray, the models were produced through 1940, although no
longer featured in the main catalog. A very rare early version with open-facing cab windows and a
winged Pennsylvania Keystone has been reported to exist. In 1937, the Lionel Jr. line was rebranded
as O-27 trains, smaller trains for those on a tighter budget, and the 1668 was a 262 steamer
headlining the new O-27 lineup under the same die-cast torpedo shell as the previous No. 238.
While adding a driver, the model lost some of the handrails and details from its predecessor.
Leading two O-27 sets, one passenger and one freight, the 1668 was available from 1937
to the end of pre-war train production in 1942. The early models were painted gunmetal gray,
while 1940 and later models were black. There was even a mechanical version of the torpedo,
the No. 1588 040 of 1936 and 1937, leading freight or passenger sets. Of all the models,
the 1668 is the easiest to find of the torpedoes today. Here with our 1668. Again, this was a
starter set locomotive in 1940, and you just, you know, look at 262. It's got a nice drive on it,
and whoops, didn't turn the power all the way off. Just put it on here and show what we've got.
Okay, forward, and I think there's the E-unit trying to engage. It's kind of stuck,
so the E-unit is sticking. I'm gonna have to take it apart and see what's going on with that.
So, not having done a pre-war locomotive before, I've got the boiler screw here,
and that looks like I'll possibly need to take these off. You know, looks like I'll have to
take those off too, and we should be in business. Well, that was easy enough. The question is, are
these Phillips screws original? Did they have Phillips screws in 1940? And if so, how common
were they? All right, then the shell should. Oh, or maybe not. What else do we have here?
So, that is attached to the shell, that is attached to that, so we're gonna have to take
the drive off as well. Oh, if these are so loose, I can just take them off like this,
and off in there, and their headlight. Here we see, just like a typical post-war motor,
we have the reverse unit up here. Here is our field coil, and here is our brushes, and there
is the armature shaft, which I will go ahead and lubricate while I'm here. And we have access to
both sides, uh, for once, but on the E-unit, let's see, do we have any broken wires? Yeah,
this looks like modern wiring. Oh, yeah, zip tie. There's a clue. This one has been rewired.
Okay, so the reverse unit is still hanging up, so let me see if cleaning it will do anything.
I'm gonna use my favorite CRC 226 here, and I'm just gonna spray the contacts down,
see that clears up any gunk that's in there. All right, I'm gonna let that sit for a minute,
see what happens. So my cleaner's been working for about 20 minutes here, and let's see if it
made a difference. Neutral, forward, whoa, neutral, reverse, whoa, wow, it flies. So,
reverse unit is working. I don't think I'm going to do anything with the, uh, the commutator face
here. Looking in there is a little bit of grime, but it doesn't look awful. Plus, the way the
motor is running, I don't think it's going to need anything with that. But before we put it back
together, let's, whoops, let's fix this headlight. First, I'm going to try an E10 screw-in type LED
and see if that helps. Now, obviously, there's only one wire going here, so to complete the
circuit, I have to ground it against something. Here, let's put it in neutral, and when I ground
this against the frame, it should light up. Aha! So that works. Let's see if I have any
standard bulbs that work as well. Am I the only one that just has a random box of light bulbs?
And this looks like the right size. Oh yeah, that's the fit. What voltage is this? Does it say?
Oh, two and a half volts. Oh, that's not going to work. 14 volts. Hey, we might have a winner.
All right, it says it's 14 volts. Let's give it a try. Oh wow, that's really 14 volts.
That's awfully bright. I don't think it's going to, I don't think that's 14 volts. I'm actually
running here at, what, maybe 7 volts, and it's lighting up that brightly. What does that say?
My crazy eyes. Let me try another one out of the same bag and see if maybe it's just mismarked.
Nope, that one's really bright too. There's no way that's a 14 volt bulb. That sucker's
going to blow. It might be around 10. Okay, I think my best bet is actually going to be the LED.
And so it appears LED is my answer. This is an E10 type base, so just a matter of finding
a screw-in E10 that has the proper voltage requirements, and you're ready to go. There
should be lots of automotive bulbs out there that fit that requirement. Let's reassemble.
And there we go. So now, cosmetically, the only thing really wrong with the locomotive is, again,
the missing marker light. And I found one of those on eBay. It's on its way. It's a part number 249
E1 running light. 249 E1. And I've got one coming for right there. And then we will be complete.
Oh, and you see there's a little bracket here that the headlight clips onto, and that completes
the ground, and that's where the headlight goes. And in typical fashion, most of your light
usually goes up the stack, or then out the front. There is no headlight lens, by the way.
Much to my surprise and relief, I have found that the coil is not burned out. But instead,
we have a broken wire. This wire that comes from the bottom of the coil is supposed to connect
right here. And instead, it was lying out loose here. So I'm going to put a new jumper wire on
here, from here to here, and that should fix the whistle problem. After repairing the wire,
soldering there, and putting it back together, I cleaned the contacts as well while I was at it.
Now let's test it on pure DC. Beautiful. So now we will hook it up to a regular
line-all transformer AC with the whistle button and see if we can get it to work.
Now with a regular AC transformer, actually this is a K-Line PowerChief,
with the bell and whistle function. Let's fire it up. Beautiful. We are fixed. So the
coil was not the problem. It was just a broken wire. Easy fix. Now I'm going to put the shell
back on, and I think with this chamber and putting it back in the metal shell, this thing ought to
sound beautiful. Unfortunately, more than half of the original tabs that hold the tender shell
into the frame are gone from use over the years. So no matter how hard I tried, I could not keep
the shell on the frame without it popping off. Well, my solution was to add some clear silicone
to the edges. I did one side, clamped it until it dried, flipped it over, and did the same thing on
the other side. So what we have, the silicone is strong enough to hold everything together,
but if I need to get into the shell to take it apart, I can pull it and the silicone will
separate and pull apart so I can get inside. So is it more difficult than, say, screws? Well, yes,
but not as difficult as undoing all of the tabs and pulling it apart. So I'd say it's a pretty
good solution. Plus, by sealing off all of the gaps, it makes the whistle work that much better.
By the way, the tender here has what's called a universal drawbar. It has the slot for this type
of connection, but it has the hole for a post-type connection. Some Lionel locomotives at the time
came either way. The next item in our set is this number 1679 Baby Ruth boxcar, and yes,
Baby Ruth and Lionel were a pair for a long time. So the only cosmetic issue with this one is we do
have a missing door, and to solve that problem, I turned to my Heygears RS and printed one that
I think captures the spirit of the actual door. So I'm going to slap a coat of orange paint on there
and replace the other side, and that will do until one of these days. Maybe in a junk box
somewhere I find an original drawer to replace it with, but the plastic will do until that time.
So I need to find a shade of orange in my paint box to kind of match that and see what I've got.
So the regular orange that I use is clearly too strong, so I'm going to try to tone it down
with some yellow. So I'm going to start with some yellow on here, then add this orange to it
until I get a shade that I think approximates our door. And let's see what we've got here.
Actually, it's getting close to the ballpark. I need a little bit. No, that's too much like
a pumpkin. It needs to be darker. It needs to be darker. Let's add some brown to it and see
what we get. You know what? When that dries, that might not be too far off. Let's give it a try.
I can always repaint. Okay, here goes. The decoration was changed a bit over the years.
There are many different versions of this Baby Ruth car. This was the last iteration,
as you notice right here, new 4-31, April 31st, yeah, of 1939. April 31st of 1939. Anyway, these
were the 1940 and later versions of the Baby Ruth car. Notice even on the ends here how all of the
details are lithographed. The basic cars came with the latch couplers. If they had the new
magnetic operating box couplers, that was the 2600 series line. In addition to in the train
sets, these cars were also available for separate sale for $1 a piece for the 1600 series or $1.50
for the 2600 series with the operating box coupler. The paint is dry. Let's install the door.
Bottom and first. Bottom and first. There we go. So there's the original. There's the replacement.
That'll do for now. And the number 1680 tank car. Lionel did have a long-term relationship with
shell. Many Lionel tank cars wearing shell colors over the years. Assuming that the engine tender
and cars are all the same ones that have been together for all the years, this would definitely
be a 1940 version because starting in 1941, the 1680 tank car was in aluminum, not in orange.
Again, notice all of the lithographed details. And how do the latch couplers latch? Well,
if you get them just right, just right, they will kind of push together automatically. But
more often than not, they need a little bit of help. And then to uncouple, you have to lift
both latches and pull them apart. So again, they will kind of sort of go together on their own,
but they usually need some help. The good news is once they're together, these couplers stay
together. And pulling up the rear is the very common number 1682 caboose. Lionel Railroad lines
in the oval there. Originally, all the way back when these were developed, they would say Ives
or Ives Lionel, and then it switched over to fully Lionel around 1935, 1934, in that range. And from
that point on, this caboose stayed pretty much the same all the way through 1942. And there it is.
The replacement marker light has been delayed by our winter weather. But otherwise, everything has
been restored to full cosmetic and operational order. And this representative of late pre-war
Lionel train production will live on well into the 21st century. So whether they are early 21st
century or mid 20th century, keep the trains running and we'll catch you next time with more
Toy Train tips and tricks.