PC Cleaning 101 | be quiet!

Tech Care
3 followers
Feb 24, 2026
Dust that deposits on PC components reduces the airflow and insulates heatsinks,
making them less efficient. This causes more heat, which in turn means less performance or
more noise. Cleaning your PC is therefore not only important for visual reasons,
it also helps to keep your computer performing well and stable in the long term.
Today I will demonstrate the best way to clean a PC using my own.
This video couldn't come fast enough for me, because my PC really needs it.
Since I built this two years ago, I've only cleaned the dust filters from time to time,
which have caught a lot, but due to its long operating time, dust always finds a way in the
system. Before we start, switch off the PC and unplug it. The dust filters can be removed quite
easily, as shown here on my PureBase 500DX. Behind the front cover, on top of the case,
and not forgetting under the power supply unit, you will usually find such mesh filters.
With some cases, the front must be removed to access the front filter. The lower filter can
be pulled out either forwards or backwards, sometimes the filters are magnetically attached,
sometimes they snap into place or are placed in a rail. For quick cleaning, you can use a vacuum
with a brush attachment. For a more thorough cleaning, the filters can also be washed with
water, as long as they're perfectly dried. Let's look inside the case. Here you have
to pay a little more attention and be particularly careful. Due to the sensitive components,
we do not use water here. You should also only use a vacuum cleaner with great care,
for example, just for the coarse dirt on the bottom of the case. However, it is better to
keep it away from sensitive areas, such as the mainboard or graphics card, to prevent these
from being damaged by static electricity or small components from being sucked in.
Compressed air or brushes are suitable instead. When working with compressed air,
always make sure you spray away from yourself or other components. Otherwise,
you will push the dust into gaps where it doesn't belong. It is best to take the parts outside,
this also protects you from inhaling dust. If you used compressed air cans, always hold them
horizontally, as they spray out the refrigerant if they are held at an angle or upside down,
which can lead to harmful condensation and residues. Nowadays, small electric airguns
that offer a good rechargeable alternative to compressed air cans are widely available.
Be careful with the fans. If the airflow is too strong, the bearing can be damaged or the fan
blades can break off. Stay on a low setting or keep a good distance to remove most of the dust.
Stubborn dirt can be removed with a slightly damp cotton swab.
Now, let's go through the components, starting with the CPU cooler. For better access,
I take the cooler of the socket. In this case, I already remove the GPU for easier disassembly.
Then, I remove the fans and clean them as discussed. To get dust out of the heatsink,
use a healthy dose of compressed air. The same thing applies to the radiators of water coolers.
If your PC has been in use for several years, it may be worth replacing with thermal paste.
After dismantling the cooler, remove the old paste with a cloth and simulate the propanol.
Before you install the new cooler or radiator, apply the new paste.
As you can see, I'm still using a Darkrock Pro 4, so I'm taking the opportunity to upgrade it
to a Darkrock Pro 5. This will give my computer a little visual and performance update.
The same applies to the graphics card, but unfortunately, it is not that easy
to remove the fans. The best thing here is to blow through the heatsink past the fans
and carefully clean the fan blades with a brush or cotton bud.
I use a 12V high power adapter that came with my graphics card. Let's take the opportunity to
change that right away. A clean look in my PC is very important to me and I want to have the
most efficient system possible, which can provide enough power for all future upgrades.
That's why I'm replacing my 80PLUS Gold certified power supply with an 80PLUS Platinum one with
PCIe Gen 5 and the 16 pin connector. I choose this straight power 12 with 1200W because it
offers enough reserves for future CPU and graphics card upgrades while also working
incredibly efficient. The old power supply is still in great shape, apart from the dust,
and it will find a new home in another system. So let's clean it. To start, use a flashlight to
look past the fan and see if any dust has actually accumulated inside. If so, blow past
the fan with a little compressed air. And please do not open your power supply. The capacitors
retain their charge for quite a while, which could get dangerous. When cleaning the mainboard,
be very careful. As it contains many small components, a brush and compressed air are
the best helpers here. That's basically it already. Now we just have to reassemble all
the components. Put the fans in, put the cooler on top of the motherboard, put the GPU in the
motherboard, put the PSU in, and as finishing touches, we can clean the side panel with glass
cleaner before reattaching it and wiping the last dust off the case. Your system should now shine
again and achieve full performance. Well, hopefully we see each other for cleaning next year.
