How and Why I Focus Bracket my Fungi Photography

The Landscape Lens
1 follower
Feb 23, 2026
In this video I walk you through the focus bracketing process that I use for my fungi and close up photography. I take you through the manual process with a Laowa 100mm 2x Ultra Macro APO and the in-camera focus shift shooting option on my Nikon D850 with a Sigma 105mm f/2.8, while discussing why I choose to bracket my images.
For those interested in the specific gear used in this video, I will leave the appropriate links below! Thank you for watching and I will see you next time.
Comments are disabled for this video.
The last time I was hanging around this bit of forest looking for fungi I took these photos
and some of you asked me for the technical process breakdown.
Seeing as I have found a subject or two let's do just that.
Also look at the mushroom just growing off this tree, amazing.
Let's run through the gear that I'm using in this video very quickly.
Today we are using the Nikon D850 and I'm going to use a Laowa 100mm f2.8 2x magnification macro
lens. This is a manual lens so I am going to go through the manual focus stacking process to begin
with and I'm going to use a tripod as well for stability. I have two tripods, one for photography
and one for filming. This is my main photography tripod but sometimes I will use my filming tripod
depending on the angle that I'm photographing my subject at.
This tripod is taller, it also has a multi-angle column which can be quite useful.
My filming tripod is very lightweight, it is essentially a travel tripod but it has a
reversible centre column so when I'm working with really low awkward angles or uneven ground
I find it so much easier to reverse my centre column and work upside down. This always looks
far more awkward than it actually is, I really don't mind working upside down like that and I
just find it so much easier to get at those harder to reach subjects. So I've opted for
working upside down for this shot. We are set up, we've got these four fungi here and actually as I
go through the focus ring they're pretty much on the same level, they're not really staggered
that dramatically in front or behind each other so that should make focus stacking this pretty
simple. I'm going to use the LCD screen to focus stack this scene essentially from front to back
and I'm going to use that and not my viewfinder because I find it so much easier to focus more
precisely. I can use the flippy out screen which is great at this awkward angle but I also have
these magnifying buttons here so I can zoom right in to make sure that I am in focus and that the
image is going to be sharp. When working with macro lenses and close-up subjects like this it's
really easy to accidentally cause vibration and shake so you want to minimise that as much as
possible so I stick my camera on the 10 second timer just so that the lens has time to settle
before the shot is taken. You can use something like one of those remote shutter triggers if you
have one of those that that's also fine I just don't have one of those with me.
Working in live view also automatically locks up my mirror for me so I don't have to do it manually
again we're just trying to make sure that we don't get any unwanted shake or vibration.
The process is simple I'm going to move the focus ring make sure that I'm actually in focus using
live view and take the photo then I'm going to rinse and repeat until I'm focused from front to
back. Depending on how many images I need to take in order to get clarity from front to back in a
scene an image like this I could be sat here for 30 minutes 40 minutes and up to an hour in order
to get all the shots that I need. It is a slow and long process and if you're working with changing
lights which I currently am you need to be able to work as fast as possible so that your exposure
is even throughout all of your images so that they stack together beautifully in post-processing.
So why focus stacking and why so many shots? Focus stacking is an option by the way you don't have to
have your subject in focus from front to back if you don't want to. I love capturing all of the
textures in these kinds of subjects so I really enjoy doing it but it could be interesting to
experiment with taking one shot or five shots instead of 20, 30, 45. When you're photographing
subjects that are extremely small like this and you're using a macro lens to get very very close
to it your depth of field is going to be very narrow at times razor thin. It's actually just
started to rain. So multiple photos in a stack is going to give you more depth of field and more
detail. You can try using a narrower aperture but of course you're going to need more light
and I personally find that natural light is occasionally hard to come by in the forest. It
can get quite dark in here. So how do you know how many photos you need to take? When I'm manually
stacking I just simply take photo after photo until I have clarity from front to back and it
is really surprising sometimes as to how many photos you end up taking. If I use the focus
shift shooting option on my D850 with a lens like the Sigma 105mm I'm going to need to tell
the camera how many photos to take so I do have to estimate how many photos I need beforehand.
This could be called focus stacking or focus bracketing on your camera. Now technically
the correct term for what we're doing right now is focus bracketing but many photographers
including myself tend to use the term focus stacking for the entire process but focus stacking
is actually the editing process term when you take that stack of photos and then smush them
into one image. So I apologise for using the wrong term. I'm sure there are macro
photographers out there whose skin is just itching every time I say focus stacking they're
like no it's focus bracketing! So the focus shift shooting mode is where the camera will take a
number of photos for me shifting the plane of focus across the frame. You need a lens with
autofocus for this and it will keep taking photos until the programmed number of images has been
taken or until the lens reaches infinity focus. Now despite being on autofocus I will always
manually focus the first shot because I want to decide where the stack starts. Usually I will do
this a little before the subject and in a case like this I actually want some of this foreground
subject uh this foreground texture sorry the wood to be in focus as well. So we're going to start
the stack probably somewhere around here and let it run all the way through down to these fungi and
past. So how do I decide how many images I need to take? It's a bit of guesswork and there are a few
things that you need to take into account. How close are you to the subject? The closer you are
the more your depth field decreases so the more images you're probably going to need to take.
I also think about my aperture. How many subjects are there? Is it just one? Is it two? Are they close
together? Are they far away? And how much of the scene do I want in focus? I'm overcautious and tend to
overestimate uh which doesn't hurt because if you take too many photos all you have to do is delete
them that's the worst that can happen or if you don't take enough photos then the worst that can
happen is that you have to start the stack again and just make micro adjustments. With the focus
step width I don't really know if there is a specific rule for this. From what I know for
macro subjects you want five and under maybe if you were doing landscapes you want to go up more
towards 10. If anybody knows if there is a specific rule for this then please feel free to share in
the comment section. That is now taking 50 images for me it does it in like a minute maybe even less
super super fast much faster than manually stacking I think you will agree but focus bracketing in
general is a little tricky um on a day like today I have to think about the fact that the floor is
very wet and soft so I don't want my tripod to slip or sink while I'm bracketing the light.
It's been very on and off um as it rains and then the sun comes out that last round of rain
has actually made me super cold so I have to make sure that my exposure is consistent throughout all
the images and I'm concerned about the first shot that I took because there was definitely a bug
making its way around a couple of the funguses and shifting them slightly so I don't know how well
that is gonna stack together it might be a tricky one. Right let's double check that
before we pack up. A few of you have suggested trying out a focus rail
I've never used one before I'm a bit concerned about the awkward and low angles I tend to get
into when I do this um I can't really comment on how that would change the technical process
or anything like that um but I'll give it a go sometime if you use one regularly and you have
any information to share feel free to pop that down in the comment section this is a space of
learning and sharing with each other so I think that is good so uh let's go because I am getting
cold. Well hopefully that was useful to someone I don't usually do this type of video and sometimes
it is difficult to know how much technical detail to put into a video so if this is something that
you want more of you want more explanation and that side of the process then do let me know and
uh I will be mindful of that in the future otherwise um it is a slippery walk back to the
car so uh onwards it's fine we've got it oh no I've just moved everything I'll just keep to my
composition I spent so long getting my tripod in position and I think I've just moved that
okay it's totally fine this could be called focus stacking or photos
photos photos photos stacking this could be called focus stacking or photos bracketing
on your camera now
