Downstream Processing

Down Stream
6 followers
8 Video Views·Feb 23, 2026
Downstream Processing
This module describes the importance of downstream processing and the various strategies involved
in downstream processing. Any industrial fermentation will comprise of both upstream
and downstream processing stages. Upstream processing involves all factors and processes
leading to and including the fermentation and consists of three main areas. The producer
organism, the medium and the fermentation process. In most cases this means recovery of a product
from a dilute aqueous solution. The primary objective in industrial fermentation is to
recover the product efficiently, reproducibly and safely towards required specification while
achieving maximum product yield at minimum recovery cost. Hence this module will introduce
to you the entire processes involved in downstream processing following the fermentation.
After completing the module you will be able to recover the extracellular product by using
separation techniques, extract the product from the harvested broth, understand the
purification methods to recover the pure product used in food industry. What is downstream processing?
The product extraction and purification steps carried out subsequent to product formation
is called downstream processing. It is the most important part that decides the quality of the
desired product obtained from the initial raw materials. The different steps and unit processes
used in downstream processing of biotech products highly depends on the nature of the product,
the level of purification required and whether the product is intracellular or extracellular.
The first stage in the recovery of an extracellular product is the removal of large
solid particles and microbial cells usually by centrifugation or filtration. In the second stage
the broth is fractionated or extracted into major fractions using ultra filtration, reverse osmosis,
adsorption or ion exchange, gel filtration or affinity chromatography, liquid-liquid extraction,
two-phase aqueous extraction or precipitation. Afterwards the product containing fraction
is purified by fractional precipitation. Further more precise chromatography techniques and
crystallization to obtain a product which is highly concentrated and essentially free from
impurities. Now let us move on to the steps involved in downstream processing of a fermentation
process. There are six important steps in downstream processing of a fermentation process.
They are as follows. One solid-liquid separation, second cell disruption, third extraction of the
product, fourth concentration of the recovered product, first step purification and the last
step is drying. This diagram gives the entire schema of upstream and downstream processing.
It gives a clear picture starting from the isolation of microorganisms followed by
improvement of the strains. Improved strains enter into the fermentation processes with the
selective media in a specific bioreactor. Afterwards they enter into the downstream
processing for the product recovery. Now we shall discuss the very first step in downstream processing
that is solid-liquid separation. In this step the cells are separated from the fermentation broth.
This can be done by filtration, centrifugation, sedimentation, flocculation or gravity settling.
Each of these processes has unique principle by which it works to separate the solid content from
liquid broth. Let us discuss the first technique involved in solid-liquid separation that is
filtration. Filtration is one of the most common processes used at all scales of operation to
separate suspended particles from a liquid or a gas using a porous medium which retains the
particles but allows the liquid or gas to pass through. It is common practice to use filter aids
when filtering bacteria or other fine or gelatinous suspensions which prove slow to filter
or partially block a filter. Kesselger which is a diatomaceous earth is the mostly widely used
material. In case of microbial biomass production and when the product is intracellular filter aids
cannot be used. A filter medium constitutes the separating agent and retains the particles
according to size while allowing the passage of the liquid through the filter. In cake filtration
the particles are retained as a cake on the filter medium. The flow through the filter layers is
dependent on area of the filter and flow resistance provided by the filter medium and the cake.
If the particles do not penetrate the filter medium then its flow resistance will remain unchanged.
It is used for the separation of filamentous fungi and filamentous bacteria. Filtration
uses pressure created by overpressure or vacuum and its rate depends on filter area,
fluid viscosity and the resistance generated by filter cake which increases with time. The
technique of filtration employed uses various filters as follows. Batch filters, continuous
filters and cross flow filtration. In batch filter a plate and frame filter is a pressure filter
in which the simplest form consists of plates and frames arranged alternately. The plates are
covered with filter cloths or filter packs. This type of filter is most suitable for fermentation
broth with low solid content and low resistance to filtration. Pressure leaf filters incorporate
a number of leaves each consisting of a metal framework of grooved plates which is covered with
a fine wire mesh or occasionally a filter cloth and often pre-coated with a layer of cellulose
fibers. There are three common types of pressure leaf filters. They are vertical metal leaf filter,
horizontal metal leaf filter, stacked disc filter. The next type of filter is continuous filter.
An example is rotary vacuum filters. Rotary drum vacuum filters are the most commonly used.
The filter is in form of a rotating drum with a partial vacuum on the inside of the drum.
A portion of the drum rotates through the medium and the cells are sacked to form a coating on the
drum. The cells are continuously scrapped off to prevent blocking of the filter. A number of
rotatory vacuum drum filters are manufactured which differ in the mechanism of cake discharge
from the drum namely a type of rotary drum vacuum filter with string discharge, a type of rotary
drum vacuum filter with scrapper discharge with pre-coating of the drum. Now the next important
filtration technique is cross flow filtration. For large scale industrial membrane filtration,
cross flow or tangential flow filtration is commonly employed. The flow of medium to be
filtered is tangential to the membrane and no filter cake builds upon the membrane.
The advantages of cross flow filtration are it performs a very efficient separation
that is cell retention is greater than 99.9 percentage. It is a closed system
very essential for the containment of organism with no aerosol formation. The process of separation
is independent of cell and media densities in contrast to centrifugation. Filter aids are not
added. The next technique in solid liquid separation is centrifugation. In centrifugation
the removal of solids relies on the density difference between the particles to be separated
and the surrounding medium. Although centrifuge may be expensive when compared with the filter
it may be essential when filtration is slow and difficult. The cells or other suspended matter
must be obtained free of filter aids. Continuous separation to a high standards of hygiene
is required. Non-continuous centrifuges are of extremely limited capacity and therefore
not suitable for large scale separation. The centrifuges used in harvesting fermentation
broths are all operated on continuous or semi-continuous basis. In addition,
equipment cost, power consumption, temperature etc. are the other disadvantages.
We shall see about the flocculation and flotation. Small bacterial cells which are difficult to
separate even by centrifugation can be recovered by flocculation that is sticking together of
cells can be induced by inorganic salts, mineral hydrocolloids and organic polyelectrolytes.
Since sedimentation rate of a particle increases with size, flocculated cells can be recovered
by centrifugation. In cases where flocculation is not effective, very fine gas bubbles can be
created by sparging with the release of overpressure or electrolysis. In any case,
the gas bubbles adsorb to and surround the cells, raising them to the surface of medium in form of
foam that is flotation. Long chain fatty acids or amines promote stable foam formation.
The cells collected in the foam are readily recovered. Flocculation and flotation are used
for the most efficient recovery of microbial biomass in some single cell protein production
systems. The second important step in downstream processing is cell disruption. Disruption of
microbial cells is usually difficult due to their small size, strong cell wall and high osmotic
pressure inside the cells. Cell disruption can be achieved by mechanical and non-mechanical means.
The disruption process is quantified by monitoring changes in absorbance,
particle size, total protein concentration or the activity of a specific enzyme.
Several mechanical methods are available for cell disruption. Mechanical cell disruption
methods include liquid shear, solid shear, agitation with abrasives, freeze thawing
and ultrasonication. Now, we shall consider these mechanical cell disruption methods one by one.
Liquid shear has been most widely used in large-scale enzyme purification procedures.
High pressure homogenizers used in the processing of milk and other products
in the food industry have proved to be very effective for microbial cell disruption.
A well-established technique at a laboratory scale is solid shear where pressure extrusion
of frozen microorganisms at around minus 25 degree centigrade through a small orifice is
performed. Disruption is due to a combination of liquid shear through a narrow orifice and
presence of ice crystals. Mechanical cell disruption can also be achieved in a disintegrator
containing a series of rotating disks and a charge of small beads. The beads are made of
mechanically resistant materials called as abrasives namely glass, alumina, ceramics and
some titanium compounds. Freezing and thawing is yet another technique in mechanical cell
disruption. Freezing and thawing of a microbial cell paste will inevitably cause ice crystals
to form and their expansion followed by thawing will lead to some subsequent disruption of cells.
Let us see the importance of ultrasonication in mechanical cell disruption.
It involves cavitation, microscopic bubbles or cavities generated by pressure waves. It is
performed by ultrasonic vibrators that produce a high frequency sound with a wave density of
approximately 20 kilohertz. A transducer converts the wave into mechanical oscillations via a
titanium probe immersed in the concentrated cells. However, this technique also generates
heat which can denature thermolabile proteins. The method can be very effective on a small scale
but a number of serious drawbacks makes it unsuitable for large-scale operations.
Now, we come to the non-mechanical cell disruption methods. An alternative to
mechanical cell disruption is to cause their permeabilization. This can be achieved in
several ways. Autolysis, osmotic shock, freezing and thawing or heat shock. In autolysis,
the biggest advantage is the low cost and the microbes own enzymes that catalyzes the process.
So, there are no foreign substances introduced into the process. In osmotic shock method,
disruption can be achieved by equilibrating cells in buffered sucrose rapidly harvesting and
resuspending in water at 4 degree centigrade. It is useful for the release of products from the
periplasmic space. Several other techniques using various chemicals and enzymes have been developed
for small-scale applications but may lead to problems with subsequent purification steps.
Organic solvents such as butanol, chloroform and methanol have been used to release enzymes
and other substances from microorganisms by creating channels through the cell membrane.
Treatment with detergents or alkali can also be effective. Cell wall degrading enzymes such as
lysozyme which degrade beta 1,4 glycosidic linkages is useful in gram positive organisms.
Addition of EDTA to chelate metal ions improve the effectiveness of lysozyme. EDTA sequesters
the divalent cations that stabilize outer membrane proteins. Antibiotics such as penicillin
can be used on actively growing bacterial cells in combination with osmotic shock.
Now let us consider the third step in downstream processing that is extraction of the product.
The process of recovering a compound or a group of compounds from a mixture or from cells into
a solvent phase is called extraction. Extraction usually involves both separation as well as
concentration of the product. There are three types of extraction procedures. First one is
the liquid-liquid extraction. It employs two immiscible liquids into which the product is
differentially soluble. Usually successfully smaller volumes of the solvent are used for
repeated extraction of a given sample. Back extraction also tends to increase the
selectivity of extraction. The extraction may be performed in a single step by multi-stage
parallel flow extraction or by counter current extraction which is most complex but most
effective one. Coming to the whole broth extraction, it should be used wherever possible since it
reduces the number of steps as well as product loss. The effectiveness of extraction may however
be reduced due to the presence of cells. Next type of extraction is the aqueous multi-phase
extraction which can be used for separation of enzymes from cells or cell debris. The enzymes
are extracted in an aqueous polyethylene glycol dextran mixture which form separate phases.
Recovery of enzymes from these phases is rather some of the difficulties encountered in
centrifugation. Now we come to the fourth step of downstream processing that is concentration
of the product. Some concentration of the product may occur during the extraction step.
Further concentration may be achieved by the following. First one evaporation, second
membrane filtration, third ion exchange methods and fourth adsorption methods.
Evaporation is generally used in cases of solvent extraction using various devices.
Example continuous flow evaporators, falling film evaporators, thin film evaporators,
centrifugal thin film evaporators and spray dryers. Efficient arrangements must be made for
recovery of the evaporated solvent to reduce cost. For low grade products often evaporation
of the whole broth is undertaken using a spray dryer. In membrane filtration both
concentration and separation of the products can be achieved usually based on the size of
the molecules. The different processes of membrane filtration are as follows.
Microfiltration, ultrafiltration, reverse osmosis and electrodialysis.
Micro and ultrafiltration work as sieves and separate molecules of different sizes
but reverse osmosis can separate molecules of similar size.
Microfiltration can be used for cell separation as well. Let us consider the ion exchange resins
now. These are polymers having firmly attached ionisable groups anions or cations which ionize
under a suitable environment. These may be solid example dextran, cellulose, polyamine,
acrylate etc. or liquid example a solvent carrying a functional group like phosphoric acid,
mono or diester etc. Solid ion exchangers may be used in two ways as follows. They may be
packed in columns or they may be added to the extract and removed by decantation.
Liquid ion exchangers dissolve only in non-aqueous solvent carriers and the separation
is similar to liquid-liquid extraction. Some antibiotics are recovered directly from the
whole broth using ion exchange resins. The product is recovered from the ion exchangers by
ion displacement. This also regenerates the ion exchange. Next is the adsorption resins.
These are porous polymers without ionization. Most compounds are adsorbed to the resins in
non-ionized state. The porosity of the resin determines the surface available for adsorption.
These resins may be apolar such as styrene, divinyl, benzene,
polar such as sulfoxide, amide or semi-polar like acrylic ester. The products are recovered
from such resins by solvent extraction, changed pH etc. The final step in the recovery of a product
is purification which aims at obtaining the product in a highly purified state.
The earlier steps would have achieved variable degrees of purification
which may determine the degree of resolution necessary during the purification step.
The degree of resolution will mainly depend on the similarities of the metabolite with other
molecules present in the concentrate and the degree of purity required in the final product.
Purification is achieved by the following procedures.
Crystallization and chromatographic procedures. Crystallization is mainly used for purification of
low molecular weight compounds like antibiotics. Example penicillin G is usually extracted from
the fermentation broth in butyl acetate and crystallized by the addition of potassium
acetate in ethanolic solution. Crystallization is the final stage in purification of products
like citric acid, sodium glutamate etc. Now we shall move on to the role of chromatographic
methods in purification. These are used for the purification of low molecular weight compounds
from mixtures of similar molecules. Example homologous antibiotics and of macromolecules
especially enzymes which are similar in properties.
The materials used for chromatography are generally coated on particulate carriers
which are packed in columns through which the liquid containing the product is pumped
either upward or downward. The separated product is recovered in some sort of fraction collector.
On a large scale organic solvents are used for collection. Therefore the whole system has to be
installed in a flame proof and explosion proof room. The different chromatographic procedures
are as follows. Adsorption, ion exchange, gel filtration, hydrophobic, affinity, covalent
and partition chromatography. Adsorption chromatography separates molecules due to
their differential affinities for the surface of a solid matrix. Example silica gel, alumina,
hydroxyapatite or an organic polymer. In case of ion exchange chromatography
resins or polysaccharides example cellulose, sepharose having attached with ionized functional
groups are used for a high resolution separation of macromolecules like proteins.
Gel filtration uses molecular sieves composed of neutral cross-linked carriers such as polymers
like agarose, dextrons of different pore sizes. Molecules smaller than the pore size enter the
carrier and are retained. They are later eluted in order of molecular size and collected.
Gel filtration is used in aqua systems. Hydrophobic carriers are used for purification
of hydrophobic molecules. Affinity chromatography uses molecules called
effectors to which the product has high and specific affinity. Example using an antibody
that is effector for purification of the antigen to which it is specific.
The effector is immobilized on a water insoluble carrier which is packed in a column through which
the mixture is passed. The effector binds only to the molecules for which it is specific
and retains it in the column. It is later recovered by elution using a buffer solution
of a specified pH. For example, human leukocyte interferon is recovered in high yield and in
high purity by affinity chromatography using monoclonal antibody immobilized on a sappharose
column. Group specific affinity chromatography and covalent chromatography are based on chemical
interactions between the carrier and the product molecules. The sixth and the last step is drying.
Drying makes the product suitable for handling and storage. It should be accomplished with a
minimum rise in temperature due to heat sensitivity of most products. Addition of sugars or other
stabilizers improves the heat tolerance of some products like enzymes and pharmaceutical preparations.
The most common approaches to drying are as follows. Vacuum drying, spray drying and
freeze drying. In spray drying the solution or slurry to be dried is atomized by a nozzle or
a rotating disc. A current of hot air that is 150 to 250 degree centigrade is passed.
The drying is so rapid that the temperature of particles remains very low. Spray drying
is used for enzymes, antibiotics and food products. Vacuum drying uses both heat and vacuum for
drying. It can be applied both in batch mode like chamber dryers and in continuous mode like
rotating drum vacuum dryers. In freeze drying the liquid to be dried is first frozen and the water
is sublimed from the frozen mass. A very low pressure is maintained to promote sublimation of
water. The energy needed for sublimation is provided by heated plates and radiation onto the
surface. The temperature of solid is regulated by regulating the pressure in the drying chamber.
This is the most gentle method of drying and is used for many pharmaceutical products example
viruses, vaccines, plasma fractions, enzymes etc and in food industries.
Thus the downstream processing plays an important role in the fermentation technology.
This module has given the detailed information about the downstream processing. As the products
vary greatly in size and nature, different separation techniques are required for their
recovery and purification. The liability or sensitivity of many of the bioproducts
to the environmental conditions places further demands on the characteristics of the separation
processes used for their production. The concentration of the product in the starting
material is a major factor in the overall cost of production. Therefore a holistic approach
is required when developing a new industrial purification strategy.
