DIY PANTRY MAKEOVER with COFFEE BAR

Motivation Monday
96 followers
#lifehacks #motivation #DIY #howto
I was lacking a pantry in our small kitchen so I made over a small area for our pantry and coffee bar.
Hey there, everyone.
Welcome back.
Today I'm going to share with you how I transformed a small space in my home to give myself a
pantry and coffee bar area.
If you're new to my channel and you like this type of content, make sure to stick around
by hitting that subscribe button and ringing the bell for notifications so you never miss
out on a new video.
All right, now I'm going to show you what I'm talking about and we're going to get into
the makeover.
All right, here is a look at our kitchen.
It's pretty small, but it does work for our family of three.
Unfortunately, when we redid it, when we moved in, we couldn't add a pantry and that
is the only thing that doesn't work.
This is the only thing that we have as a pantry is our lazy Susan cabinet.
You can see here it is jammed packed full of boxes and cans and all kinds of stuff.
If you look over here, there's this spot where the cow picture is and that's where my coffee
bar is right now.
I want to turn that into my coffee bar and pantry and give myself a little bit more room.
I'm going to go ahead and take this all apart and take everything out of it.
I got this cabinet from Ikea when we first moved in here and I do love it.
It's a really nice cabinet, but it's just not functional for our home right now.
I went ahead and sold it on Facebook Marketplace and then I went to Home Depot the next day
and I picked up this big pantry cabinet and these two wall cabinets.
All right, before I install these cabinets, I need to go ahead and take out the baseboard
along this wall and that short wall over there.
Unfortunately, this should have been an easy task, but unfortunately it was not.
The previous owners, when they had the wood floors installed, they did not take out the
baseboards first.
They just installed the wood floors up to the baseboards.
They were wedged in between the wall and the flooring and it took a lot of wiggling and
finagling to get them out of there, but I did do that.
If you're going to put in wood floors, make sure you take out the baseboards first and
then reinstall them.
Now it was time to install the pantry cabinet first right there in that corner.
It fit perfectly.
Unfortunately, though, the floor and the walls are uneven, so I did have to use some shims
to level it out at the bottom there.
They just break off.
You just slide them underneath there and then you break them off and you level everything
out and then once that was level, I did use some cabinet screws to go ahead and screw
the cabinet into the studs.
Next are the wall cabinets.
Now I chose wall cabinets because the base cabinets, the depth of those were going to
be too wide and they were going to stick out beyond my walkway here and beyond the
pantry cabinet.
The pantry cabinet in depth is 18 inches and that corner wall there, I only had 20 inches
to work with.
So the wall cabinets are 12 inches in depth.
You can see here I have a little issue with the height.
They are a little bit lower, so to raise them up to match the pantry and to also make them
counter height, I used some two by fours and cut those to five and a half inches, which
is the same height as in between the pantry cabinet and then I screwed those in and that
made some feet for these cabinets and they were able to sit beside the pantry and they
matched up really well.
And then I just placed those in place.
Now another issue I do have with these wall cabinets is the depth is only 12 inches, so
I have a gap between the back of the cabinet and the wall.
So when I put my countertop on, I need some support on that back wall for the countertop.
So I went ahead and cut a, I think it was like a one by two or something, it was a spare
piece of wood I had in the garage and then I just screwed it in to the studs back there
and that's going to be my support piece.
Also on this side here, I cut another piece of scrap wood and I'm going to nail that on
to the side and that way I can use my filler pieces that are going to be on the side and
you'll see that here in a minute.
So that way there won't be a gap there.
And then after that was all set up, I was able to go ahead and screw my cabinets together
to keep them nice and neat.
And then, now here's the side panel pieces that I put here and you can see why I installed
that board there so that way I would not have that gap.
And then I put another side panel piece up where the pantry is there and I just used
my nail gun to nail these in.
It worked out perfectly.
I love this nail gun.
It is awesome for small jobs like this.
It is a Ryobi and I will link it down below in the description box because Amazon has
it but Home Depot has it as well.
So just if you're looking for a nail gun, this one is a great starter to work with.
Alright, now the cabinets are all put in place.
It's time to go ahead and paint.
I used this paint that I used on my office makeover for my husband's built-in desk and
it is in the color carbon.
It's by Behr and it is just cabinet and trim paint.
So it does have a sheen to it but it's easily wipeable and it goes on very nice on these
cabinets.
Now I did go ahead and use a brush to go around all of the edges first and then I came back
in with a roller to smooth everything out.
I did do, I believe, two, probably like two and a half coats so that way everything was
covered up nicely and I did come back and paint the inside of the cabinet doors.
Now I need to go ahead and cover up those two by fours so I just cut a piece of baseboard
trim and I nailed that up along the side there and then I went ahead and painted that in
black so that it would look like all one piece and now it is time to address this outlet
here.
There's an outlet back there.
I need access to that outlet.
When the countertop is on top, you're not going to have access so what I'm going to
do is I'm going to take a hole saw and I am just going to drill in there and drill a hole
in line with that outlet and then I'm going to take my Dremel tool and I'm going to cut
out a box so that that way I have enough room to stick my hand in there all the way through
there to be able to plug a plug back there like I'm doing here.
So I just plugged an outlet in there and then I need to drill a hole up in the top there
so I just did that with the hole saw so that way my cords can feed down through there and
then I'm going to go ahead and take this outlet and I'm going to put some hook and loop fastener
on it and I'm just going to go ahead and peel that peel and stick back off of there and
tape that up there so that that way it is all nice and neat so I can feed my cords down
through there.
Now for the countertop, I chose this butcher block which came from Home Depot.
It's the most affordable option.
I do have to cut it down though because it's too long and it's also too much in depth.
So I got a table saw for Christmas and I was a little nervous to use it so my husband helped
out here and we cut the depth down which it was super easy.
Again, this is a Ryobi table saw.
I love it.
I'll link it down below as well and then we had to cut some of the length off so we did
that.
We were able to just mark where or how much we needed to take off and then we just went
through the table saw and it worked out perfectly.
Now I'm able to go ahead and put my countertop onto the top of these cabinets and I just
slid it on there.
I did use some screws and come up underneath the cabinet to hold it in place and then I
did drill a hole into the top of the countertop through that hole that I drilled in the top
of the cabinet so that that way I can feed my cords all through there again and plug
everything in.
Now I'm going to go ahead and stain this.
We're not going to use this for food prep or anything like that so I'm just going to
use some regular varathane wood stain.
I believe this is in the color American Walnut and I just brushed one coat of it on and then
wiped it off as I went.
This color matches my fireplace and everything else that is wood in my house already so it
works out perfectly.
I did seal this with a polyurethane afterwards and let it cure for about 24 hours.
Now I can go ahead and put on the handles which I got from Amazon and they are just
gold handles and what I do to put them on is I just use a tape measure and I just measure
in the middle and then I marked the back of each handle with some chalk, just regular
chalk and then I pushed it up against the cabinet to mark the holes and then I drilled
my holes and then I just screwed in my handles.
It worked out perfectly and everything lined up evenly.
It was just the easiest method I know how to put on handles and make sure that they
are even.
Next I decided to use this peel and stick wallpaper from Target to give this space a
little bit more of a focal point.
So I just used two rolls of it and I applied it to this back wall here.
I just used an exacto knife to trim around the edges of everything and then when I laid
down the next panel I made sure I overlapped it a little bit with the panel I had already
placed down and lined up the pattern as best as I could and then used a credit card to
smooth everything out.
Now what I'm going to do is I'm going to hang some open shelving above the countertop here
and I just made these shelves myself.
I used a 1x10x8 foot long board and I cut that in half so that way I had two 4 foot
pieces and then I stained both those pieces with that same American Walnut stain that
I stained the countertop with and I hung these with some brackets from Home Depot.
Alright now everything is ready to be decorated.
The coffee bar and the shelves.
So what I like to do is gather everything up here and I put it on my table.
Some of it is things that I already had around my house.
Some of it is things from Target that I picked up or home goods and also Amazon.
So I'll leave a link to the decor down below in the description box if I can.
So I just started off with the coffee bar.
I added all of my appliances that I needed to plug in and this worked out perfectly.
I was able to feed those cords through the holes that I made and just plug them into
my outlet that I placed on the inside of my cabinet.
It worked out perfectly.
Now I'm able to just continue to decorate the coffee bar with a few little things here
and then for the shelves, I like to try to stick to a rule of three, like groups of three.
So that's kind of what I'm doing here.
Not a decorator.
I don't know what I'm doing.
I just like to play around with things and if I like it, I leave it.
If I don't, I take it apart and do something different.
So all of that is done and for my pantry cabinets, I didn't film this part.
I just put everything back and kind of just tried to organize it with some baskets.
It works out a lot better in the cabinets.
In the coffee bar are for glasses and coffee cups and extra dining things that I need.
Now that everything is finished, here's a quick look at the before and now here's the
after.
I absolutely love how this space turned out adjacent from my kitchen.
It works perfectly and it gives me more pantry space and a beautiful coffee bar and looks
gorgeous in my dining room with my fireplace.
I hope you guys love this as much as I do and you enjoyed this video.
Make sure to give it a thumbs up and follow me on Facebook and Instagram for more and
I will see you guys in the next one.
Take care.
Bye-bye.
