How to make bracelets with Elastic Cords Strings Easily? | How to secure a beaded bracelet?

Cozy Beads
9 followers
1 Video View·Feb 19, 2026
In this video, I showed you a simple way of making elastic cords bracelets with two cords, three cords, and four cords, and how to tie the knots correctly and tug the strings into the bead hole.
Enjoy your DIY fun!!!
How to make Elastic Cord Bracelets, follow me, it's easy, I'll show you in this video step by step.
Basically, we use 2 cords for small beads like 4mm and 3 cords for 8mm or 6mm beads and 4 cords for 10mm, 12mm, even 14mm beads.
So now we know how to make this needle and we start with 2 cords, we thread in the elastic cords and then thread in the beads.
For 2 cords and 4 cords, we use the bead with the biggest hole because we need to hide the knot in the hole so that you won't see the knot when you wear the bracelet.
So here we are, some people they would just tie the knot like this, which is fine, but with the small beads, you cannot tie the knot like this.
You need to do this, thread in the circle like this and then you pull all the beads over there.
See, so it's very easy to hide the knot when you tie it.
Now you tie 2 knots, first one and second one.
Make sure it's secure and then you cut the cords, don't cut it all, okay, like this.
And then you pull the beads so you cannot see the knot from the bracelet.
So now I'll be showing you how to make 3 cords and we don't have to use this needle for 3 cords, I mean we cannot use this one because it's 3 cords.
First we hold about 1 inch of the cord and then put another one on top, we tie a knot right here to make it the needle.
You see, now it becomes the needle with 3 cords like this.
And then we cut the string, okay you see the whole picture of it and this is the needle.
For 3 cords, we need to make sure the first bead is with the biggest hole, so we chose it.
Okay, I think this one will be fine, okay.
The first one is with the biggest hole, then we thread in the bead.
Okay, almost done, you see.
And now we need to cut the needle like this, okay.
So how do we make the knot?
You see the circle right here, okay.
You put 2 cords in the circle and then you pull all the beads.
Just like 4 cords.
And then you tie 2 knots.
Okay.
To make 10mm beads.
It's the same way with 2 cords bracelet.
Just to show you how to tie the knot.
And again, we reserve the biggest hole in the end because we need to tie the knot inside this bead hole.
That's a double circle because it's 4 cords, okay.
And here we are.
We pull all the beads right here, you see.
And then we tie 2 knots.
Make sure it's secure and we cut the cords with a little bit.
And we tuck it in the hole.
This modification kit is handmade.
The rows are handmade from the big one.
And we make this needle by ourselves.
