Como modelar passarinhos em argila

Sculpture Work
8 followers
15 Video Views·Feb 18, 2026
Hello my name is Darlipa Ilegrini and today I'll show you how to make little birds
These little birds are the ones here and we can customize each one to be different
The base is always the same—we start with a cone and here I already have a ceramic mold
That's where I made the cone but if you don't have one just do it another way okay
And we'll use this cone upside down with this end forming the bird's base
And here I’m bringing the two halves together already stitching them
It's important this seam is sewn properly so it doesn't come loose or split later
I can even support you from within here
Typically in ceramics we use something called a slip trailer which is a thin blade
Made from the same clay we're using plus water to help with the adhesion
And the seam is the blend of these two clays these two pieces of clay right here at this
If I'm not using it it's because the clay is still very soft and has plenty of moisture
Here I'll shape the head so I take a bit of clay and mold it into form
It's like a plate and I keep gluing and shaping it into the form I want right
You'll notice I don't use water in this process—I'm simply incorporating the clay
And by making this sliding motion that's the seam and that's how I shape it
So this entire process is now speeding up to save time but it remains
a crucial stage of shaping the form which can vary significantly
The little bird is longer shorter tail shorter tail longer and even
This form can transform into other objects become a fish turn into another animal
a cat a little lamb but anyway it's by adding these volumes that we proceed like this
By shaping it and also applying a certain amount of pressure we can adjust the tuning
a bit more and in this section the little bird is already drier so the clay is already
at the leather edge which we call it and I can slide this wooden tool
what's called a float used to smooth and remove all unevenness
And now this stage of the drawing is also really enjoyable as we gradually sketch out the lines
and shaping the figures into the bird which we'll later print carve and so on
You can create a variety of decorations on it each one different from the other
One important thing I haven't mentioned yet is that each of these little birds has a hole in the bottom
It's meant to release the air trapped inside otherwise it would form a
large bubble and that bubble would cause the piece to burst in the oven
There I am wrapping up the drawing decoration and
printing sections and then another phase begins
After the piece is thoroughly dry it goes into
the oven where it has already been fired once at 900 degrees
This stage is important for what comes next so he'll
receive the painting and glazing then be fired once more
I fire this second time at 1280 degrees in a gas oven
People often ask me if you can burn it in a kitchen oven—no you can't
Ceramics require specialized kilns designed for high temperatures
You can't heat them for long because the parts can't withstand thermal shock
The little birds once finished were colorful and fun—exactly the idea
Play with shapes with patterns with colors
I hope you enjoyed it and make great use of these ideas for your future projects
See you next time
