How to Fire the American Navy’s Largest Gun
1 Video View·Feb 16, 2026
In this episode we're talking about the 16in guns. The views and opinions expressed in this video are those of the content creator only and may not reflect the views and opinions of the Battleship New Jersey Museum & Memorial, the Home Port Alliance for the USS New Jersey, Inc., its staff, crew, or others. The research presented herein represents the most up-to-date scholarship available to us at the time of filming, but our understanding of the past is constantly evolving. This video is made for entertainment purposes only.
Hi I'm Ryan Szymanski, curator for Battleship New Jersey Museum and Memorial
and today we're doing a sort of a remake video.
In this one we're going to follow the propellant and the projectile
through the various levels of the turret and show that all in one video.
In order to keep this video short we're not going to go into exhaustive detail
on any of these systems but we've showed all these areas in
past videos but now we've got better lights thanks to some of our volunteers
donating stuff so we should be able to show it off a
little bit better than we have in the past
and let's face it we've got a bunch of new viewers who might not have gone back
and watched these videos from three four years ago.
We just crossed the quarter million subscriber mark so thank you guys for
joining us. We are in one of the ship's powder
magazines. This one is down on fifth deck so
there's seven stories to the hull we're five down from the main deck we
This particular magazine is between turret number one
forward of us and turret number two aft of us.
The magazines are actually two stories tall in most cases.
There is a second identical space directly above us
which is using a gravity hoist like this one right here
to bring propellant from up above down to this level.
You get your powder and you pass it on and you're now sitting on the hoist.
The hoist doesn't do anything. There is a foot pedal
down here that you step on and when you depress that foot pedal
it releases a latch so if there's weight on the gravity hoist
specifically about 110 pounds like a powder bag
the hoist will sink into the lower magazine. When you take that weight off
the hoist automatically comes back up. The powder
only passes into the turret on these lower level magazines
so while guys are down here pulling up to 110 pound powder bags out of
these aluminum canisters and getting them on the brass
shelf here start pushing it towards the roller doors that pass it into the
turret another group of guys in the upper
magazine can also be pulling powder out of cans
and putting them on the hoist to send them down so that helps
maximize how quickly we can pass powder. During many fire missions it's
not necessary but if you're getting into a surface
battle where you want to get to the ship's theoretical maximum rate
of fire one round every 30 seconds you're going to have to have tons of
guys in these magazines and be operating both magazines simultaneously.
Part of the slowdown is how these are stored
they're stored in these aluminum canisters that are stacked
floor to ceiling when the ship is fully loaded
so you have to step on these folding stools to get up there and reach in
you're using these brass hooks to get the bags out of the back each one of
these canisters will hold three bags of powder but it takes six
to fire one projectile so you're emptying two canisters at a time for
each barrel and this magazine is helping to serve
all three barrels of turret number one so we're trying
to get 18 110 pound bags out in any given
30 second time span if we're going at our theoretical max
so that means that if the ship is firing at its theoretical maximum
rate of fire you are offloading something like six tons of
powder every minute and then also close to 20 tons of projectile
so that's a lot of firepower going down range it's a good thing that the ship
i'm not aware of any time in her career that she was firing at her theoretical
maximum from all three turrets at once but gives
you an idea of the amount of manpower it takes to be moving these 110 pound bags
manually i mentioned that everything's brass or
aluminum in here aluminum canisters brass tools brass rail
here these are all metals that don't spark as
opposed to ferrous metals like steel which could potentially spark which is
decidedly not great around propellant so we've gotten the propellant down from
the upper magazines and out of the tanks in
this magazine we've got it on the rail we're pushing it by hand
down this way and now we've got a couple of protective features here that they're
going to keep if something does happen there is an
explosion in the magazine here or in the turret out there
it will keep that from going from one space to the next
so first off we've got the powder passing scuttle door right here
which is counterweighted you can see this cable coming off down to the
counterweight here so when i finish passing through i can
push that out this will drop down into place and then in theory with the
counterweight and it being well oiled which it is not
today we could relatively easily push this up into the
position with one hand and it'll just lock in place on this
nice brass handle now i'm ready to pass powder
so i'm going to ring this bell notice i don't have a handle to open
this roller door once i've rung that bell the guy
in the annular space on the other side can roll open that door
so i can pass in powder let's go check out the annular space
all right so now we're in the annular space the magazine is on that side of
the bulkhead the turret is on that side of the
bulkhead so you can see this is a fairly narrow
round space that just goes around the barbed bed and has
not one but two flash proof roller doors so you've got double protection
between an explosion being able to propagate from
one of the powder handling spaces in this case a turret over there
and another powder handling space the magazine over there
so if you get into a situation like happens at jutland
where a projectile hits the turret of a battle cruiser
and then explodes down into the bar bet that should not be able to propagate
from in there where it has set off a couple of bags of powder that was
getting ready to be passed through the flash proof doors
into the magazine on that side so the bell's just rung
i get my powder bag out here now i've got this other door here but i don't
have the handle for that one so i've got to ring the bell for them
to be able to grab it from the other side so now we're actually in the
turret section of the gun the the rotating part although not this whole
space where it is i'll show you that in a minute
but now we finally pass from the magazine into the barbed bed
so the bell is just rung
i open up this other flash proof roller door and now i've got my
110 pound bag of propellant here to carry over to the
hoisting operation begins in the powder handling room at the very bottom
here under the supervision of a petty officer three powder door operators
and nine powder passers keep the powder bags moving to the powder hoists
now before i do that why do i have to carry this by hand why don't we have a
shelf or something in here to move it well because depending on what direction
we're firing part of this room will have moved so here on the deck you can
see that part of the space rotates part of the space does not rotate the part
attached to the magazine does not rotate the magazines don't rotate but the part
attached to the gun turret does this is the lowest story of that gun turret
so there isn't a simple way to move stuff from here to there well there isn't a
mechanical way to move things from here to there there is a very simple way to
do it use your sailors so you got to pick up the bag of powder and bring it
over here to the elevator so now we've got six bags for a full shot loaded in
the elevator when the elevator comes back down this door in here will open
and then i can push the powder bags into that two-story elevator through on the top
three on the bottom the door will close and it can then be hoisted up to the
turret from here we have to get up to the next level of the turret where the
shells are stored when the ship was in service it was via this vertical ladder
here on the central stalk this is where all the electrical stuff going up to the
turret comes to its dead center so as the turret turns it's not twisting those
cables too much for your tours of this space when you come on board the ship
today you've got a normal ADA compliant ladderway but for the crew manning this
turret it's something like this and there are only two ways into this gun
turret from the bottom here where we are climbing up and from the top in the gun
house climbing down how did you beat me up here so what you didn't see was we're
in turret two right now which has a mezzanine level there are some additional
shells stored there but there are no shell hoists so it's just some extra
ammunition that can be brought up usually not in combat but later on
afterwards that only exists in turret two because turret two super fires over
turret one so it's an extra story taller otherwise all the magazine spaces all
the other comparable stuff is on the same level until you get up here to the
shell decks where they're staggered because of mezzanine level let's go look
around the lower shell deck so now you can see that we've got a couple of
different colors of shells stored in a couple of different locations so
depending on what type of shell we need for this particular mission we need to
get them to the shell hoists which I'll show you next let's say we're doing a
shore bombardment mission that likely means that we need the green high
capacity shells as opposed to we're in a gunfight with an enemy battleship and we
need the black armor-piercing shells or we're just doing training and we need
the blue blind loaded and plug shells regardless when you know what type of
engagement you're in the gunnery officer will call for a particular type of shell
and you would start shooting the ones from this inner ring right here notice
notice that I'm standing in a separate ring and there's an outer ring too so
what the heck is going on with all this this middle ring where I am is where the
shell hoists are the shell hoists are essentially attached to the breech of
the gun so however the gun turns the point at a target this ring is going to
turn with it and then stay stationary once the gun gets there this outer ring
think of it as part of the ship it does not rotate at all that is fixed
projectile stowage and then this inner ring can rotate independently of the
turret so let's say I fired all the green shells I need that are close to
the hoist I can start rotating this around to get more green shells to the
hoist while I'm doing that I'm going to start filling in these empty spots from
shells we've already shot off with more green shells from the fixed projectile
stowage that's a two-man operation there's one guy holding the top of the
shell making sure it doesn't tip over essentially and then there's a second
guy down here tailing the line this capstan would spin so as this capstan
spins we're pulling the shell across the deck notice the deck is unpainted and
has a lot of scrape marks on it so that is intentionally would be covered with
oil so that the one ton projectile can slide across to where we need it in the
other place so while we're doing this notice I'm taking up the slack in the
line this is the hard part of the job right that's making sure that this
doesn't start to bunch up and see nothing happens if there's no slack now
they've got slack on it it's moving again I will go check out Iowa's channel
they are doing this also so now we have pulled a shell into the hoist each hoist
has multiple pawls in it essentially it's like a conveyor belt that goes up
and around it's got pawls that stick out so if there's a shell there that will
catch the projectile and take it up with it there is enough room in this hoist to
stack essentially five projectiles on top of each other you can do this say
you're going into a short bombardment you know you're not going to need armor
piercing shells we can preload these high capacity shells and that'll get our
rate of fire up higher operating the hoist is done from the handle right here
all of our handles have lucky pennies embedded in them but it's a two position
handle three position I guess the centerline position is in the off
position you can pull this up and turn it so now it is locked and I can
actuate it and then we want to raise the shell we're going to push it in the
hoist position our shells only fiberglass so it's much easier to go up
and down and then if we want to bring it down again we just push into the lower
position over here just like there are two powder decks to help speed up the
rate of fire for loading the powder there are two shell decks like this for
each turret we're in the lower one right now there is an upper level as well as
this one and it looks almost identical we've done some videos of that upper
level where we've showed some of the differences the stops that prevent the
turret from rotating into the superstructure and the tie-down clips
that keep the turret in place make sure it doesn't fall out of the ship but in
terms of following the powder and the projectile once this is in the hoist it
is in the hoist for the rest of the way up to the turret and that's where we're
going to go next if you are trying to get a high rate of fire you do have both
shell decks manned which often would not be the case but if you do need a high
rate of fire then you are going to man everything then you're essentially
alternating we load a shell in here it's at this position then they load a shell
in the upper one it's in that position and as they pass it up they just keep
loading alternating shells from the shell decks and it takes about a minute
to get a shell into the hoist so if each one's doing it offset by 30 seconds
you in theory get your one round every 30 seconds the hoists for both the
powder and the shells are going to pass through the electric deck on their way
up to the gun pits and the turret officers booth where we're going to go
next they're in these enclosed hoists at that point so you there isn't a whole
heck of a lot to see but the electric deck is where a lot of the functions of
the turret are controlled from it's where a lot of the electrics and the
hoist motors and those sorts of things are as well so now we're in the gun pit
portion of the turret this is the uppermost level in this instance we're
in the right gun barrel the right gun pit for turret number two and we're
actually one deck above the main deck here at this point we've been in this
video specifically focusing on the path of the powder and the projectiles getting
up here but keep in mind there's a turret officers booth behind us there's
a ton of other places in the turret where things are happening to aim the
guns do fire control that sort of stuff at the same time as this powder handling
and shell handling is happening but to keep this video brief and I have a
feeling it's not brief already we were only talking about this aspect of it so
this level there's usually about three sailors stationed the first thing that's
going to happen is the shell comes up the hoist here so it'll be in roughly
this position the barrel after firing the last shot or as it's preparing to
load the first shot is going to depress to five degrees that's going to line up
a platform on the back of the barrel with this deck right here which will
allow the gun captain to step off of this position onto that platform drop
the breech of the gun and then we can open up the spanner tray the spanner tray will
open like this it'll lay the shell down horizontally it comes up vertically and
lays it down horizontally and it will span the difference between here and the
breech of the gun this right here is the rammer so this lever is where the
rammer man would sit and he will push that to ram the shell in really hard
that's going to allow the brass ring at the base of the shell to engage with the
rifling then he retracts the rammer so it's back in this position but the
spanner tray stays down at that point this door opens up the elevator for the
powder comes up and the first three bags come off of that elevator onto the
spanner tray by hand you move those three bags out of the way because the
elevator then goes up to the next position and drops the three bags that
were on that lower platform off and those come between the three that are
always already there at this point if you have anything additional to add in
there such as during Vietnam the packets of Swedish additive get inserted at this
point while this is all happening up here the primer man down in the pit is
putting the primer in the breech of the gun so once the powder is all in the
spanner tray the rammer will push the rammer in in the slower speed you don't
want to move it too fast have too much friction have too much compression and
pushes that in until the gun captain signals that he sees that's going in all
the way then the tray breaks back into this position so it can take the next
shell and the breech of the gun is closed so the guns ready to fire at that
point the gun captain hits a lever that's going to return the gun to the
angle that's supposed to be aimed at as opposed to the loading angle and from
there can be fire and again in theory all of this can happen in as little as
30 seconds in practice it's usually about a minute between shots sometimes
longer because you want to see where the last shell landed before you're firing
the next shell so you can adjust your aim firing all the shells in the world
don't do you any good unless they're hitting the target that you're aiming at
which of our older videos do you guys want to see us redo if you guys have
been watching for a while or if you're new what's a video topic that you
haven't seen yet we've probably done it before but it could very well be an old
one let's know in the comment section down below one of the benefits is we now
have much better light so we can show off these spaces better the downside is
you can now see how bad the paint is peeling in this space the space is off
of the tour route and because it's not climate-controlled the Sun beating on
the armor plate will cause it to expand at night it gets cool and contracts and
it just pops the paint off the wall so even when we paint these spaces it
doesn't last all that long I wish we still had 1600 crew on board to do this
Battleship New Jersey receives operating support that allows us to buy paint from
a number of visitors and private businesses we really appreciate that
support there's a link in description below if you'd like to donate to
support the museum and our ongoing restoration you can also support us by
liking sharing subscribing so more people find about the museum and our
channel thanks for watching

