Making A Wolf Wood Carving From The Design to The Finished Produc

Buddha Art
9 followers
Hello everyone and welcome to another video So I went back and forth between ideas before I
decided to make a wolf sculpture in this video The reason I was a little drawn to it was because it felt just right
It was hard for me to decide because I really wanted to create something unique not
just because I'm afraid that a lot of my videos end up too similar But honestly after
After giving it some thought I realized that creating sculptures is truly what I want to do so yeah I just went ahead and did it
Ahead and a wolf sculpture—it is So here you can see me making four sketches of the
design I actually kind of thought I’d go with number one because I really like that concept
and so on But I decided to create a few more designs just to see if I could come up with
something interesting And this is also something I’d like to explore further in the future
Just take a bit more time to explore the design before I commit to making something
You know creating an entire sculpture like this out of wood takes a lot of time
So it's definitely worth spending a few extra hours on the design because just like
e sculpture could take around 40 hours or more to complete so by the time I reached the third design I had become much more skilled and confide
I made the shapes looser and let the pencil guide the design naturally
It's a bit cool but honestly I think it was a bit too much across the board—not very balanced
The fourth design was also my attempt to create something different compared to the
others Here you can see I've rendered all the designs slightly to get a better view
A little better how they'd turn out in the end So after a moment's thought I went with number two
Basically I just liked how it felt so balanced—well at least in my mind You ca
Think something else—doesn't matter I went for number two So with that settled
And since the design was finalized I went ahead and created a more defined and larger version of it
And this is the sketch I'll use as a template for the actual wood carving I'm
recording this after I've finished the project So to be honest the final resul
urned out much different from the sketch I'm working on right now which is kind of cool bu
In the future I’d like to make the carving as close as possible to the original design
Because then hopefully I'll be much better at drawing and also much better at
conveying exactly what I want in my drawings That's something I'd really like to do
the future So here's the finished drawing A bit of shading and detail to see how it looks
The contours are set and I'm ready to head into the workshop Here's my cozy little workspace
And as you can see I'm almost always wearing a dust mask The reason is that I
There's no dust collector so it's extremely dusty all the way to the workshop And hopefully
One day I'll have a dust collector and it'll make working there a bit more pleasant
So here's the piece of wood I'm going to use—it's walnut with the white central section I'm
Not sure but I think it's called linden wood so I'm just figuring out how much I need
for this project And as you can see I'll have plenty of wood left over from this block for other uses
Projects So now I just need to sand the block a bit to make the surface flatter
So the design will adhere better to it since I'm going to glue the design onto the
As I was gluing the design onto the wood I realized I had a lot of excess wood on the
on the sides and on top I really wanted to use all the wood or as much of it as possible
That's why I tore off the original design went inside and printed a larger version
The bigger design was about 10% larger and the difference between those sizes when
comes to the end result is going to be quite large so the bandsaw I have isn't ideal for making
Sharp curves and the like— it can manage a few bends but not very sharp ones as I mentioned The
technique I'm using here involves making multiple cuts and ultimately aiming to achieve the desired shape
as close as I can get to the design lines with the cuts And as you can see I can pretty
I’ve cut away all the wood I need around the edges of the design So here I am creating the center
I'm also drawing a few lines to mark where I'll cut off the extra wood on my
bandsaw I'm trying to remove as much wood as possible on the bandsaw before moving on to the next step
using my Dremel or other power tools so you might notice in many parts of my videos
at I'm self-taught Something like that for instance I genuinely can't think of any other way to approach this
So I just used a saw and made several cuts and actually I used a vise once I'd started cutting
without it It was pretty tough So yeah I'm just drawing lots of lines on it and then I'm
Using ancient chisel I carefully chip away each small section I've cut with my saw
So here's my latest purchase: a power grinder from Bosch which I bought because I
needed a tool that could quickly remove wood during the initial stage of wood carving
And I also bought it because I’m making my sculptures larger and larger so this tool is
It's going to be really handy for me but I'm really scared to use it and I have a lot of respect for it
It's a very dangerous tool so if you're going to use it keep that in mind and treat it with respect
and take it slow with the cuts And here I'm using my Merlin 2 grinder and I'm very sad to tell you
at this tool failed me during this project and the reason was that when I started another projec
That was the winged turtle—I really pushed this tool to its limits and tested it extensively
And I read in the instructions afterward that you should let the tool work on its own—don’t push it
o the woods So I'm afraid I'm the reason that tool gave up on me
Unfortunately it was quite expensive but I think I'll invest in another mini grinder
the future So the saw I'm using here is one with many fine teeth which means it cuts smoothly and precisely
a lot of time to get used to it but it makes really nice smooth cuts so it's excellent for
purposes like this So now it's time to tackle the most challenging part of creating this sculpture
which is to make the eyes The reason I say it's the most tricky part is because it's the most delicate and precise aspect of the entire process
e part where mistakes are most obvious if you know what I mean So it's really important to
get the eyes right to make the sculpture look good So here is the weapon of choice I don'
remember what this Dremel bit is called but it's excellent for quickly cutting wood
but at the same time at a medium level of detail So I'm sorry about my hand being in front of the
I was taking plenty of photos but right then I was fully focused completely absorbed in what I was doing because
I really wanted to make these eyes look as good as I possibly could and to be honest the first one turned ou
Pretty nice and yeah I'm really satisfied In the end I felt like the eyes might have been a bit too large
There's a bit of space between them but it looks a little odd though not overly unnatural I think
So on to the next part of the head which is the nose And I must be honest with you and say tha
Amidst much of the filming here I'm subtly reshaping it here and there
So it's a bit hard for me to fit everything into the video but I'm doing my best
to include the most important elements—the key features the nose the eyes and so on
And I also have to be honest and say that I often get lost in the carving
so I forget that I'm filming this for a YouTube video For my next project I'll try to keep
eep in mind how my shots are so you can get an even better view of how the carving process works
from start to finish And here's a cute little picture of me with a wolf in the workshop having
fun and I look terrified But yeah moving on to the next part—the nostrils So yeah
This is the process you're seeing me use—I'm tracing the outlines and then cutting them out with scissors
Dremel And I'm actually a surgeon without a license so if you need a nose job
Just send me an email and I’ll handle it for you at a great price—of course at your own risk
It's beginning to resemble a wolf now and in many ways it's truly coming to life
And as I'm carving along here I just want to quickly mention my Instagram which is on the
screen right now I'm uploading many of my drawings there along with processed photos
stuff from my latest project So if you want to follow along that would be really cool So if you
Remember the design—I made these like cheek hairs or whatever you call them very much so
sharp and edgy but as I was tracing those lines I had something entirely different in mind
I wanted to make them a bit more dynamic and give them a more natural flowing appearance
like hair blowing along the side of the wolf And I think that was a very smart choice to make
So the way I was thinking when I made these cheek hairs—let's just call them cheek hairs—
I don't know what they're called I was just trying to sketch in the main shapes first as you can see
ere kind of like six large shapes where the hair comes together and then I added smaller ones
lines so I could add a little detail to each of the large shapes And I think tha
It turned out really well And if you ask me whether I'm satisfied the answer is yes—I'm satisfied
Moving on to the smaller chin hairs I think I might have placed them a bit too close to the
Eye I'd prefer them a bit lower closer to the cheek but yeah not bad at all
To be honest and maybe the angle of the hairs was a bit too sharp So here I just wanted to show
Bring the hairs on the side a bit closer to the result And am I satisfied Yes I am satisfied
So here I am just reshaping the lower part of the sculpture to try to make it look more like the original
design And now people it's finally time for the cleanup process And done This process actually
It took eight hours altogether and there was a lot of hand sanding involved but I managed to get it smooth
as much as I could So here's the base I made for this sculpture I really wanted the white line to
step through the sculpture into the base But you know I switched to a simpler base because
e first one was a bit too short to be honest So I think the one I ended up making
looked better So now I'm creating a center line on the base and then I'll proceed with the sculpture
Place it in the center and sketch a few lines around the end of the sculpture to mark where I need it
should put it after I've applied the epoxy to the base and the sculpture The epoxy I'm using is
Using here is just a quick-setting epoxy from Biltema and a shoutout to my friend from
Sweden who keeps commenting in the comment section saying I use so many products from Biltema
I just want to make it clear that I'm not sponsored but yeah I do find those comments a bit funny
It's great And yeah just applying the epoxy making sure not to use too much
Because I know that if I press it like this it’ll just squeeze out the sides
I thought I hadn’t used too much epoxy but as you can see I have to clean away some of it
e epoxy that oozed out after I placed the sculpture on it And it's actually quite nice this way because
en I won't have any cracks for the oil to seep into And it can be tricky when I
go to the oiled section then because if I oil it and wipe off the excess the oil will remain trapped in betwee
e base and the sculpture and it will seep out So it's going to create something like Yeah it looks
like a wet line encircling the sculpture So we’ve finally reached the last stage of the sculpture and
That’s to oil it And like many of my other sculptures I’m using Danish oil as a finish
product And as you can see here the walnut changes significantly in color before and after oiling
and oil stage And wow I was amazed at just how beautiful the wood truly was once I applied the
oil So here is the finished piece after many coats of oil I must just say that I am super
I'm really happy I went through with this project It's been such a rewarding experience
It's something I've been thinking about for a very long time and I can't wait to create another sculpture
That size So thank you all so much for watching and thank
you so much for supporting me by doing that Have a great day everyone
