EASY Planted Tank Tutorial for Betta Fish (Step by Step)

Fish Tank Serenity
6 followers
EASY Planted Tank Tutorial for Betta Fish (Step by Step)
#Aquariumcoop #Aquariumfish #Fishtank
#fishtank #fishkeeping #relaxation #aquarium #soothingrelaxation #fishtankwithfilter #fishtankentertainment #fishtankledlight #fishtankjoy #fishtanktutorial
You can't go wrong with a planted betta tank in your home.
Bettas are interesting fish to watch and they don't require a ton of space,
so this is a perfect way to sneak in another tank to your collection,
or just add a beautiful conversation piece to your living space.
Today we'll be setting up a simple 5-gallon planted tank
that will be the perfect home for a new betta fish.
This tank is near the sink for easy water changes,
and away from windows to avoid any drafts or direct light.
We'll add in the substrate first.
I'm using an aqua soil which has a lot of minerals for the plants,
but any substrate can be used.
For a more aesthetically pleasing look,
slope the substrate up toward the back of the tank.
If the substrate is deep in the front,
we tend to lose visual space for the decor and plants,
so I like to keep it shallow in the front.
For this aquarium, we can create a natural look
using both rocks and pieces of driftwood.
Neutral colors are great at mimicking nature.
We'll be using a mix of small, medium, and large gray siriu stone,
and some pieces of this chunky driftwood.
Since wood has a tendency to float in water,
which would make filling this aquarium difficult,
I chose to pre-soak these pieces for a few days before I set up this tank.
That way, when the tank gets filled up,
the wood will stay put because it's already waterlogged.
It takes some pre-planning, but avoids a lot of frustration in the long run.
After getting everything together,
we'll start adding the largest pieces in first,
then working down to the medium-sized pieces,
and finally adding some smaller details up and around the front,
filling in the gaps.
It's looking complete, and the textures of the wood and rock go well together.
Some might call this an island or nature aquarium.
It's probably somewhere in the middle.
There aren't any rules to this,
so the idea is just to make it visually pleasing for you
so you can enjoy looking at it.
Now that all the rocks and wood pieces are placed,
we can start adding in the plants.
One way to make an aquarium look more natural
is to use a mix of plants rather than all just one type.
This five-gallon tank will be getting six different types of plants.
For the background, Valisneria will be perfect.
It will grow new plants along the back
and arch over the top of the water as it grows.
In the middle, Java Fern and Anubias Nanapetite
will live in and around the rocks and wood.
It prefers to be attached to the decor
rather than buried directly into the substrate.
On either side, we'll be adding this Cryptocoryne Wentei Red
for a pop of color.
We'll add in this Bacopa species in the middle as well.
It will need to be trimmed if it gets too tall,
but it adds some beautiful texture to the aquarium.
Last, some Microsword for the front and around the rocks.
It'll add a grassy look and remain short
and eventually send runners all across the aquarium
and become much more lush.
To fill out this tank,
I like to break down the plants into smaller bunches
so that I can get more coverage.
The Java Fern can be split at the rhizome
into smaller plants.
Just a few, we don't want to chop it up too much.
The Anubias can be done the same way.
This one broke easily into two medium-sized clumps.
I also broke down the Crypt
so I can plant it on either side of the decor
and fill out the sides a bit.
And the Microsword as well.
This one will be spread across the front of the tank
to fill out the foreground a little bit
and make it look like some grass popped up around the rocks.
Using a spray bottle to mist the plants
while getting them ready prevents drying out too much,
which can cause damage,
especially to the fully aquatic plants like Vallisneria.
I just give them a spray every so often.
For planting, it can be easier to plant into dry substrate
rather than a full tank.
With planting tweezers,
we'll place the Vallisneria in first.
I tend to use both hands while planting
so I can hold the tweezers in one hand
and simultaneously hold the plant down with the other hand
while lifting up the tweezers.
This keeps the plant in place
so it doesn't come right back up
as soon as I remove the tweezers.
Adding the Bacopa in next in the middle of the mid-ground
and then the Crypts around the sides.
The Java Fern is just getting wedged
in between some open spaces around the rocks and wood.
It should stay in place just fine,
but if you've got a stubborn floater,
super glue is the best way to keep it permanently in place.
The Anubias is the same.
Since it's smaller, I placed it closer to the front.
Last, the Micro Sword goes in the very front
around the hardscape.
Spraying the plants down one last time
while we get ready to flood the tank
and get it filled up with water.
Carefully placing the hose to disperse the water
will fill the tank and keep an eye out for any floaters.
Now it's really looking like a completed planted aquarium.
It just needs a few pieces of equipment
to keep it running consistently.
For the plants, we'll need to add a light.
This tank will be getting an Aquarium Co-op
Easy Plant LED.
The 16-inch fits perfectly on this standard 5-gallon tank
and it has quite a few brightness settings.
This tank doesn't have any demanding plants
and I want to try to avoid algae as much as possible.
So it'll be set at half power for about 6 hours per day,
which is still probably more than enough for these plants.
Next, a sponge filter with an air stone
will keep the water clean
and it'll still be nice and gentle for a betta fish.
I'm attaching the other end of the airline tubing
to this battery-powered air pump
and setting it on the lowest airflow setting.
Last, since bettas require warmer water temperatures,
a heater will be necessary.
The Aquarium Co-op heater is nice
because it has a really long cord
and the control is located outside of the tank
so it's super easy to control.
I set this one to 77 degrees Fahrenheit.
That is all the equipment running
and everything is looking good.
The next step to getting this tank ready for an inhabitant
is to make sure we have some beneficial bacteria established
to break down toxic fish waste and ammonia.
The nitrogen cycle is carried out by nitrifying
or beneficial bacteria
and it's the process of breaking down
harmful chemical compounds like ammonia,
which is naturally produced by fish.
The bacteria turn ammonia into nitrite first
and then nitrate, which is the least harmful compound.
These bacteria are needed because if left unchecked,
ammonia can quickly reach harmful levels.
While it's likely that at least some bacteria
hitchhiked in on the plants,
we'll be adding a few other sources
to seed this tank quickly.
Fritzzyme 7 is a live beneficial bacteria additive
that you can buy by the bottle
and simply add directly into the aquarium.
I'm just pouring some in.
According to the bottle,
it's safe to add up to 10 times the dose
so I don't specifically measure.
To add even more,
I'm squeezing some filter media
pulled directly from an established aquarium's filter
that has been running for a long time.
From the same aquarium,
I harvested some pest snails
and added them to the tank as well.
These are pond and ram's horn snails.
These snails always come in on the plants anyway
and they'll help the cycle along
by feeding the bacteria.
This is totally optional.
Not everyone wants pest snails in their tank.
I don't mind them.
They're like free algae eaters.
By testing the water,
we can tell if the bacteria are doing their job.
After a couple weeks,
the water tested zero ammonia and nitrite
and a lot of nitrates.
I ended up doing a few water changes
just to keep the nitrate level below 50 parts per million.
Now it's been consistently testing
30 to 40 parts per million nitrates
with weekly water changes
and adding liquid fertilizer for the plants.
Eventually, we can probably cut back on water changes
but since this tank is still relatively new
and we're trying to avoid excess algae
from nutrient buildup
while the plants get established,
weekly water changes will still be needed for a while.
Adding a betta fish will be the next step
so it's off to the store to see what we can find.
Aquarium Co-op has a lot of nice betta fish
so it was a little hard to choose
but I ended up with a beautiful
blue and orange marbled half-moon betta.
He almost looks like a watercolor painting
and he's really active.
This fish will be perfect
for the planted aquarium we've built for him.
Let's take him home.
To get this betta acclimated,
I poured in tank water from the planted aquarium
into the bag every 10 to 15 minutes
until it was mostly water from the tank.
Since I'm in the same area as Aquarium Co-op
and our water parameters are similar,
this fish should be able to acclimate pretty easily.
Let's add him to the aquarium.
The betta seems to be settling in well.
He isn't showing signs of being too stressed out
but we will continue to test the water
for the next few days to look for ammonia spikes
or anything out of the ordinary.
I added a lid and let him get used to the new tank.
The next day, I came back to feed him
and he ate a ton of food.
These are betta pellets from Xtreme
and the fish really seem to like them.
Overall, he seems happy in his new home
and he's been stretching his fins
and exploring all around the tank.
And this fish has been pretty entertaining to watch too.
He's definitely on the feisty side.
This betta planted tank has been so enjoyable.
It's nice to look at and low maintenance to keep.
Would you build a planted tank for a betta like this one?
We hope you enjoyed this video.
To watch another one just like it, click here.
