Affordable Gear I d Buy If I started Cycling In 2026

BICYBLE SHOW
111 followers
All you need to go cycling is a bike. You might even get pretty far, or you might get two flat
tires, snap your chain, get your bike stolen, be stranded in the middle of nowhere. The following
things will stop those things from happening. Probably. And nothing in this video is sponsored.
Starting with patch kit for fixing punctures that happen to your inner tubes inside of your tires,
which you probably have if you've just started cycling. Most of the time a puncture can be fixed
by applying a patch to the hole which has appeared in the inner tube inside your tire.
There are, of course, exceptions here, like very big punctures, but most of the time a kit like
this is going to sort you out. Some fantastic options would be the Park Tool vulcanizing patch
kit. You get four round patches, two over ones, some vulcanizing fluid, which is just glue,
and sandpaper for roughing up your inner tube so it sticks better. You can also get self-adhesive
ones, which you just peel off and stick on like a sticker. I am scared of these, though, because
I've used them before and then they've not stuck on properly and failed, and then I've had to do
it again. But this was many, many years ago, and Benny tells me that they're now a lot better,
so you can choose to trust him if you want. Park Tool's self-adhesive one is four pounds.
Lezyne do a kit, which also has a tire boot, which you put on the inside of your tire
if your tire has a hole in it so big that the inner tube would otherwise
poke through. Lezyne one is just three pounds twenty. Plus, many other brands are available,
and all of them are cheaper than an Uber home. I can read your comments already. How much time
are you going to be saving using self-adhesive versus the glue ones? Well, there's only one way
to find out. Fight! Very enlightening. Thanks, Benny and Jimmy. Anyway, patching inner tubes,
even if you do it at home after your ride, quite a nice thing to do because you save some money.
You can take the inner tubes back out afterwards if you roll them up, get all the air out.
You are recycling, so less inner tubes just ending up in the bin and having to be processed.
I'm sure some of them end up in landfill, which is probably not the best thing in the world.
And if you don't want to patch them, remember to turn them into a giant
inner tube bouncy ball, because why wouldn't you want one of those?
Multi-tool that has a chain tool included. A multi-tool should be pretty self-explanatory.
It has a bunch of tools on it, like Allen keys and torques. And we also recommend one that has
a chain tool on it, which I'll explain a little bit later. Really, its purpose is to give you
the best chance of getting home safely. If you are one of those people that doesn't like carrying
tools, then I can give you a list of many reasons why you should. You have an annoying rattling
bottle cage. Your seat post has slipped. Your brakes are rubbing. Your headset is loose.
You need to change your saddle height or your cleats if you use them. And if you have a modern
disc brake bike, the chances are you're going to need to take your wheels off at some point too.
When picking a multi-tool, we suggest finding one that's made from a material that isn't going to
rust, such as stainless steel or aluminium. And that it's also machined to a really high standard
to give you the best chance of not rounding your bolts. Multi-tools that we like are ones like
Decathlon's Multi-Tool 900. Then there's also the Topeak Hexus 10, or you can get them separately.
So by getting a Topeak X, which is typically about £10, and then you can also get a universal
chain breaker for £5. So although it's two tools that are separate, it's the same function.
When it comes to multi-tools with chain breakers, be wary. Most are made for 8 to 11 speed chains.
If you are running a 12 or 13 speed chain, you'll need to find a tool that works for that.
Quick link. The technical product description of a quick link is that it replaces an outer chain
link with two interlocking plates on fixed pins that lock under chain tension and can be released
by squeezing them together. Or if we translate it into human, it's a quick way to link your chain
together. You need to make sure you have the correct quick link for your chain, and I'm going
to show you how to do that. First, you need to find the speed of your chain, which in most cases
is etched onto the chain itself, like here, or by counting the number of sprockets. Next,
Google the words X speed chain quick link, please. And you will typically find a quick link that
works. If you're in doubt, chat to your local bike shop. I do have one very, very, very,
very strong caveat here. Please do not use the wrong quick link for your chain. It will
potentially be disastrous. You can get quick links from Shimano, SRAM, and chain specialists
like KMC, and they typically cost somewhere between three and eight pounds per link.
Spare inner tube. You've got your patch kit sorted, but are you really going to stand by the side of
the road fiddling around freezing cold with your fingers coming off trying to patch a tube? Well,
you don't need to because you can just carry a brand new or already patched inner tube in your
pocket or another place on your bike. There are many inner tube types available. The most common
is butyl, the normal black ones. They don't leak air very fast, and the patch kits, which I just
talked about, work on them. Then you've got latex tubes, the usually red ones. They feel nicer to
ride and they are faster, but they leak air really quickly. They are patchable with the normal
patches that I mentioned above though. Thermoplastic inner tubes, they've become really popular over
the last few years. They are super light and super small, which means you can carry multiple
in the space of a butyl inner tube. Don't put them in a tyre that's the wrong volume because they will
not stretch. They just get lots of tiny holes in and they'll fail after a few minutes. If you want
to patch these and repair them, you need to use a TPU patch. You can't use the normal patches that I just
talked about. If you're buying spare inner tubes, be aware that there are different wheel sizes,
different valve lengths to suit different rim depths, different tyre sizes, so you need to
make sure you have the right size inner tube for your wheel. You can't just buy any one.
Read the side of your tyre and that should have all of the information that you need.
There's also lots of other numbers on an inner tube box to confuse you. That's why they put it
there. It's like a prank. To make it even more confusing, there are two types of common valve,
Schrader and Presta. I would say match what you already have so your front and rear wheels are
the same valve. Great options are Continental, Specialized do a tube, Vittoria do them, Halfords,
Giant. Pretty much all brands make their own inner tube and as long as you get the right size,
you can't go too wrong. I love a bike shop but unfortunately, in this case, you're probably
going to find the best deals online, especially if you buy them in bulk. Finally, it's common
practice to carry a spare inner tube even if you're using a fancy modern tubeless system with
the goop inside of your tyre. Most cyclists just carry a spare tube with them. No matter what the
I would recommend doing that. Now you've patched your inner tube or replaced it with a lovely new
one, how are you going to put air inside? You need a pump. First port of call is a mini pump
because you can take it with you and you can probably attach it to your bike. You can get a
basic mini pump from Topeak, other brands are available, for about £10. Less than £10 but
if you really do get into cycling and you're riding most days, are you going to want to be
up your tyres with a little tiny mini pump like this? No. To save you from losing the will to live
and hating your life, a track pump is probably the next purchase. They're quite big and might
look a bit weird in your living room but they're going to make your life better. Giant do a basic
one for about £20. Other brands are available. Oh and now you have a pressure gauge as well so
you can read the side of your tyre and make sure it matches when you're inflating it instead of
just guessing, which I can't officially recommend but lots of people do, including me when I just
have a mini pump out on the road. Chain lube. If you are unfamiliar with what chain lube does,
in simple terms it protects your chain from the elements and reduces the friction between your
chain, cassette and chainring which are all typically made from metal. When it comes to
chain lube the most versatile option is an all condition oil-based lube and that is the all
condition oil lube by Fennec which comes in at about £6. Do you think this is a good opportunity
for us to show you how and when to actually use it? Roll the VT. This isn't ideal, this is the
bare minimum, however if you want to take it up a notch then watch our no tools five minute bike
cleaning video, we'll put a link in the description of this one. Lights. Something I would buy even if I
wasn't planning on riding in the dark because you never know what's going to happen. You might get
chased by a bear and the bear might have a fast bike so you might be chased really far away from
home and then you end up having to cycle home after dropping the bear in the dark. Anyway, even
riding in the daytime I usually put a rear light on, flashing, just to be extra safe and seen.
Cheap lights are the best they've ever been but there are some features that I would definitely
make sure they have before buying. The first one being an elastic band application so you can take
them on and off easy and they're easier to take off when you want to charge them. Point two, get the
ones that are USB rechargeable, I can't be arsed dealing with batteries. Three, make sure they're
water resistant because well a rear light in particular is in a prime getting sprayed by water
location. Now there's lots and lots of lights that tick all those three boxes and are very
affordable. Garmin kindly sponsored this channel so now I use a fancy radar barrier light which
tells you when cars are coming but before then I used this. There are lots of variations of these
on the internet and they all look very very similar. They're elasticy, USB-C and water
resistant IPX5. They are very bright for the price but it's worth noting that these are to be seen
not to see. If you want to be able to see you need to spend quite a lot more money, at least £50
for something that has a higher lumen rating, much brighter and then you'll be able to see
where you're going. But I think in most people's situations you just need to be seen first.
Sports specific glasses. You probably think that sports specific glasses are just a fashion
accessory. Well you are wrong. They're actually designed to keep nasty things out of your eyes
like wind, dust, pollen, ultraviolet rays. We've found options as cheap as £5 which is for decathlon
sunglasses that offer UV protection, wrap around your eyes to protect you from dust and things
falling into your eyes which obviously no one wants, to a more expensive £20 option also from
decathlon. What you're paying for is additional features like anti-fogging and interchangeable
lenses that allow you to use them in say winter or the dark evenings. Come to think of it the cheaper
£5 glasses also have a cat zero low light option so for £10 you could get two pairs of glasses and
that's half the price of the £20 glasses. What's important when it comes to sports specific glasses
is safety when they fail. Sadly bike tumbles do happen. We have previously tested cheap and fake
plastic glasses that have broken into tiny little shivs and that is exactly what you do not want
anywhere near your face ever. Period. Helmet. I'm not going to tell you whether you should wear
a helmet or not but if I was starting cycling in 2026 I would buy a helmet. I ride a bike on busy
fast roads sometimes, I ride down fast descents and I bank my bike over through corners and
sometimes ride off-road on slippery loose gravel and sometimes on a bicycle with squishy suspension
so I can ride it even faster. It is very fun. When I do those kinds of rides I wear a helmet.
There are some things to remember here. It needs to fit. If a helmet's too big then it's not going
to protect your head. If it's too small it's going to hurt and probably also not protect your head.
And two, second-hand helmet purchases are banned because you don't know what that helmet's been
through and you don't know how old it is. Helmets generally have to be replaced from the date of
their first use after a certain amount of time. Different brands have different recommendations.
Looking at the casque that I use it's three years. If I was starting cycling in 2026 I would go for
the most bang for buck helmet like the Specialized Align 2 MIPS which is just 38 quid and if you want
to spend more they generally get lighter and better ventilated. Not safer. Some of the cheaper
helmets are actually rated better than the more expensive ones. Virginia Tech ranks the Align 2
MIPS 31st out of 284 helmets tested well above some other big brands that cost two or three times
more. MIPS is that yellow thing that you see inside some helmets that helps reduce rotational
impact and supposed to make it better. If you want my opinion get the one that you like the look of
and is comfortable because then you will actually use it. Torque wrench. What the hell is that?
Well all the little bolts and clamps on your bike are supposed to be done up to the correct
torque setting. Measured in newton meters this is the rotational force applied to a bolt. Take a
look at your stem handlebar seat post you'll probably find little bits of writing that say
five newton meters four newton meters indicating how tight they should be done up. If you stick to
these numbers you hopefully won't have any exploding bolts clamps crushing things or
threads stripped. On the other end of the scale if you tighten something not tight enough then it
can come loose while you're riding and you can die which is bad. A torque wrench is usually a big
handle that you can fit different ends in which you can set to different newton meter numbers
ideally matching the component you want to tighten up and then you can tighten all your bolts to the
correct torque. Most of them will make a little click noise when it's tight enough. Do not try
and tighten it again to make sure unless you're going to back off the bolt entirely before making
sure otherwise you'll over tighten it and maybe explode your bike. Topeak does a really basic
torque wrench with some bits that goes from three to twelve newton meters which is good for most
bolts on your bike. If you start tinkering with bottom brackets or cassettes then generally you
need a bigger torque wrench which is going to be more expensive. You might want to borrow one from
a friend because you're probably not adjusting or tinkering with those things too often. Cycling shorts
you technically do not need it but it can make cycling more enjoyable. We have all heard someone
say oh how do you sit on that that must be uncomfortable. Sure it does feel super odd when
you wear cycling shorts for the first time. The primary purpose of cycling shorts is to keep you
comfortable on the saddle by them staying in place and allowing your bits to breathe. The
important things to look for in shorts are fit and the quality of the pad. In the early days of cycling
professional riders rode hundreds of miles in heavy wool shorts that left their legs chafed and
bloodied. The solution the leather chamois and that is where the chamois cream gets its name from.
The cream was literally used to soften the leather. Fortunately cycling pads or chamois
have since evolved into what we have today. As someone that has previously worked in cycling
clothing manufacturing I cannot stress enough how important fit is and specifically that your shorts
are tight. It's tight for a reason. If things are free to move around then rubbing which is the enemy
of comfort can happen. That said you obviously don't want it so tight that it's restricting your
blood. That's bad as well. Somewhere perfectly in the middle. The thing is this is a very personal
product which means there is no one size fits all solution. More annoyingly cycling shorts and
clothing are generally expensive which means you will need to shell out a bit for that added comfort.
Bike lock. Not everyone leaves their bike outside but if you do get a proper lock. There's some out
there that cost £3 and there's some that cost £300. Previously we've made a handful of videos
testing them so I can comfortably say something like the £30 On Guard is a great balance of
keeping your bike safer and not costing a fortune. If your bike is insured you need to make sure that
your lock meets the requirements of your policy. Boring I know but you want to make sure that they
are going to pay out if you sadly lose your beloved bike. Look for a sole secure rating
of gold or diamond on a bike lock. The Master Locksmith Association independently test locks
and rates them on protection and how long it takes to break through. When we tested the diamond rated
£30 On Guard Pitbull it lasted three minutes and two seconds and considering it's £30
which is half of the other diamond rated locks that we found that is a pretty sick result.
Clipless shoes and pedals have a silly confusing name because clipless actually means clipped.
It's shoes and pedals that stick together so your feet are relatively locked in and these systems
are the go-to for cycling enthusiasts. The systems are comprised of a cleat which fits
into the bottom of a purpose-made cycling shoe that snaps into a spring-loaded mechanism on the
pedal most of the time. Then you can ride around and feel really connected to the bike. It feels
fantastic and you might be able to put out more power through the pedals so you can go faster
and then eventually you can come to a stop and then you won't be able to get your feet out and
we've all done it. Joking aside you should be able to unclip easily by twisting your foot.
Most pedals have an adjustment so you can start off quite loose. There's a good way to learn.
There is a bit of a learning curve but once you've got the hang of it most riders don't
go backwards and end up using flat pedals again. Road clipless systems look like this
and they're mostly single-sided and designed for maximum stiffness and minimal weight but
they can be harder to clip into because you only got one side and you end up walking like a penguin.
I prefer mountain bike style or off-road. Double-sided pedals that let you clip into
either side are definitely the more practical option. They're smaller, they have recessed cleats
so it also makes walking much easier. Clipless pedals may not be for everyone and they're pretty
far down this list for good reason. If you want pedal recommendations Shimano make probably the
indestructible pedal in the world. The PD-M520 is a very good starting point and it comes with
cleats in the box as well. Shoes. Shimano have a really good range. Look at the cross-country range
the XC. They have a few different price points often found discounted online in places. Check them out.
Saddle. We as cyclists spend a lot of time sitting on the saddle. There's so many different saddles
and everyone has a different opinion on which is best. What we have found having ridden so
many of them is that there is one thing that is definitely noticeable and makes a difference for
most people. A pressure relief cutout. It typically will be a different shape for men and women
but that said some men find a women's saddle to be best and some women find a men's to be.
The only negative from a pressure relief cutout is a wet soggy undercarriage when it rains.
Shout out to Ergon who seem to be nailing women's saddles at the moment.
Bikefit James is recommending them to loads of people. Emily now is using one too. Francis loves
the Sala Italia Boost SLR. I love the Pro Griffin and Benny seems to be able to ride literally
anything including the Fizik Arione which in my opinion is the worst saddle ever made.
There is one more thing I would definitely buy and it's a saddle bag. I mean how else are you
going to carry around all of the little tools and stuff. Not in your pockets because your pockets
sag and it becomes pretty uncomfortable. So the neatest place is behind your saddle. Some of them
are dirt cheap. You can squeeze all of these things in perfectly. Try and find one that is
water resistant because again like the rear light it is in a prime spraying location. You can also
get bags that fit on your top tube if you want to be able to access it. It's quite good for little
sweets and snacks. You can get this one from Bontrager or this one from Decathlon. Don't
forget to check out your local bike shop as well because sometimes they have fantastic deals and
maybe you can buy a bundle of stuff and they'll give you a good deal. There you go. That's a
bunch of stuff that we would buy if we were starting cycling in 2026. Most of it affordable,
all of it probably going to save you some money on Ubers.
Got any other essentials? Put them in the comments down below.
