Best Way to Create Depth in Pencil Drawings

Pencil Art
23 followers
I like to start with the eyes. This is the 4B, so I'm going to slowly build up the values. So you
see below the eye is a highlight, then under it you see a mid-tone and then a shadow. On a face,
because the face is round, you need smooth transitions. So that's why I like to start light
and then slowly build up the values and then smoothen the layer each time. That's how I
create smooth transitions and that's how I like to do that. So I use the graphite that's on the
tissue and then smudge over those areas where I didn't go over. With charcoal you can get it dark
right away just with one layer. The great thing about charcoal is I'm using really light pressure
and I'm getting it really dark right away. So now you see once you have that black of the iris,
the rest of the eye is way too light, even though we started with a light
layer. I'm going to use the 6B, darken the upper lash line. So now that you have the dark value
of the iris, you can see now that the rest and how dark you can make the rest of the eye. You
have something to compare. So sometimes you might feel like finishing the eye completely because
it doesn't look finished right now. So you want to add the lashes but I would wait until you have
the skin. So you have the right value of the skin first and then you can also see that the eyeball
white is also too white, still too white, comparing it to the dark iris. And sometimes I'm not sure
yet if it's the correct value. That's when I continue, move on to the nose and the rest of
the face. So that's another reason I start light because it's best to have it too light
that you need to darken a bit, then the other way around. I might need to add a layer later
but in the beginning I'm not really sure yet if this is too dark or correct. Because in the
reference photo there is the black background and I have the white background of my paper.
See the light is coming from the front but a bit more to the right. So you see the eyeball
white on this side is brighter than on this side of the eye. And sometimes when I don't finish the
eyes but then I think okay I need to work on something else and because then you focus on
the eyes too much and then you start to lose your focus or you don't really see what you can add or
change and then it's best to focus on something else and then go back. See that I want to darken
some more. Like you see the shadow here on the nose on the left side and that can help you
when you're adding values. Knowing where the light is coming from, which side. So whenever you shade
try to stop with a really light pressure so that you don't get any hard edges anywhere.
It's really important because faces are round and if you get any hard edges it will look like an
outline because an edge means that it stops there. So I'm going to take a clean part just to be sure
when I smudge over the lighter area here and here under the eye. Now sometimes it gets a bit
darker than you want then you can carefully use the kneaded eraser dab some of the, dab to pick
up some of the graphite. Keep in mind that the graphite, there is graphite on the stump so I
don't go over any lighter areas like the highlights. Only over the edges to get a
smoother transition. With the 8B I'm going to work on, it's a bit darker here, the values around the
eye just a bit more. So this is the 8B I'm just using to darken some extra graphite that's on the
stump and here. So I'm going to blend the edges so that you have smooth transition because that
highlight, it's not a circle, you don't want an edge around that highlight. Otherwise it will
look like a spot on his forehead. Smoothen the transition from the mid-tone to the highlight.
With the black pencil I want to darken the eyebrows a bit. Really light pressure here
because the hairs aren't that dark here at the beginning. So I'm carefully shading to darken here
and then here you see those eyebrow hairs. Try not to draw all of the lashes next to each other,
skip a few because some are lighter, some have a gap between them. So I like to
blend them a bit, make them look more, make them look softer. So I'm using really light pressure
and just adding a bit and then I'm going to blend this with the blending stump. So carefully
when you blend other areas that are less dark. I think I'm going to work on the nose now.
Just go over the sketch line everywhere where it's darker. I'm going to add graphite to the
middle part here just because I don't want to go too dark right away. Focus on each step one at a
time so don't think about the end result and don't think about what you need to draw and how much
time it will take. Just focus on the now and on what you're drawing now and then even if you don't
have a lot of time just say to yourself okay I'm just going to work on the nose a little,
add a few layers and then tomorrow or whenever you have time you can continue with the mouth
and then step by step you will make it easier for yourself to continue to work on a drawing.
Darken the tip here. I don't want it too dark so that's why I'm using the 4B. You can also
use the 6B but adding another layer of the 4B can help. So that's why I like to layer and
add multiple layers and then blend in between. That's my technique. Layering and blending in
between each layer will give you smooth transitions. And then I also shade around
the nose with the skin around the nose. And now with the 8B this shadow can be darker.
Keep on using light pressure. If the 8B is not dark enough then you can move on to the next.
So just like with the eyes try not to keep on focusing the whole time. Step away, come back
and if you think okay I am not sure what else move on to the next facial feature. I'm going
to use the 4B graphite pencil and then start working on the mouth and then here on the lower
lip. Starting in the middle see this curve and then you see a few parts that are lighter and
then some crease lines. If you lose those highlights on the lower lip you can also use the
white marker for that. I'm going to try to shade around that because I'm going to use the blending
stump to blend with the 6B. The lips aren't too dark so I think just here in this corner I can
use the black later but the rest the value it's not all that dark or yeah maybe if I compare it
I might darken later but now it looks dark enough and then remember here I just
drew an outline but you want this line to blend in with the value of the cheek here.
You want to make it blend in to create the same value here on the cheek here but I'm pretty sure
that once I start adding the dark background I might need to go back to darken a few areas and
then when you have more of the drawing then you can step back and then look at the whole drawing
the whole face and compare it to the reference photo and when I go over the highlights I take
I pay attention that I take a clean part because if you keep on smudging with graphite on your
on the tissue then you might darken the highlights too much. Now that I added the value on the face
and the cheeks now that the mouth looks too light you see that it looks the same value look at the
reference photo you see that the lips are just a bit darker value so I have the 8B and I'm going
to darken a bit and then here towards the middle of the mouth it's a bit darker and for this corner
with the black pencil because again it's a bit darker and then here I'm using really light
pressure but just darken it a bit more where the 8B isn't dark enough with the stump because
these are smaller if I use the soft tissue then it just all becomes one value with the blending
stump you can carefully just go over the areas you want to blend then like a shadow here
because the lips are sticking out a bit here you see a shadow from the inside of the shirt
and then to the 6B here you can see that the jaw line is just a bit darker than the neck line
so here I'm going to use the 8B because I'm starting to lose the line of the jaw
when I'm adding shadow here on the neck so before I lose this line of the chin and the jaw line
and to darken and you don't want to outline and it looks like the 8B isn't even dark enough so
maybe I can use the charcoal like I did here and yeah you can go from patchy to really smooth
really fast with the blending stump not too light but just making sure that I can see the difference
of the chin and the neck because it all got one value and with the 8B darken the shirt here
actually I'm going to use the charcoal I want to darken this part normally I use the black for
this but I actually discovered that the charcoal can go over this really easily at first I didn't
think that charcoal and graphite would go well together but as long as you use light pressure
this is the 2B charcoal pencil and you can also blend it really easily with the blending stump
I see like shadow here from the shirts I think I'm going to blend the shirt later
see how that looks with the background I'm just using the charcoal that I have on the stump and
just spreading it around and then going in circular motion here I see some texture of the hair
but I can also add that with the with the black pencil create that texture of the hair
I'm adding the charcoal bit but now I'm discovering that you can easily use charcoal
pan pastel so you can just combine it all to create this to create a beautiful background
and the neck so that I don't lose it that it all gets like blended in with the background
and then I don't get it too dark add a bit more and then blend with the other side
you know it's a bit patchy here so I'm going to use soft tissue to smoothen that because this
is the face so you want the skin to be smoother and I already see that I can darken a few areas
here so again it can be get a bit patchy when you smudge when you smudge with the blending stump
then I just use the soft tissue to smooth further the black pencil add those hairs you can be really
precise with this pencil more precise than the charcoal so I think I'm going to use this for
the texture and the in the hair as well the shadow here around the nose 8b because I want to
have more control when I create this line here in the chin okay not sure if this part is too
dark but I'm going to check later once I have more finished I'm using really light pressure
where I need to shade keep on looking back at the reference photo to see and look at the shape of
the shadow once you darken more and more then you look back at the highlight and here I see
actually this one pretty light and I'm just taking the graphite that's on the stump and it's
adding just a touch making the highlight less bright and I could also use the sponge like just
like I did here but yeah I just want to be more careful and I don't darken it too much
and I still need to add those beautiful bright highlights in the eye but I'm going to do that
in the last step same for the lips here like adding those final details can sometimes really
make a difference before I add the background on this side I'm going to use the black pencil
and start to draw that hair texture and then here you see some going over the forehead
I'm just using the black pencil that because if you if I use the sponge I have less control
and here in between the eyebrows you notice that it can also be just a bit darker if you
notice like the mid-tone or or highlight somewhere is too light just add a bit of the
just add a light layer of graphite blend and then compare make the hair look a bit softer not like
you have all of these lines so I always like to blend over each layer with hair as well
and I'm also going to make a picture of my drawing because that I think that's easier to
check values that way here the hair blends a bit in with the background so I'm defining
the edge a bit more and I have more control with the pencil than with the sponge like define the
edge of the ear but make sure you don't have an outline around the ear so I'm going to use the
and I'm going to create some yeah some shadow on it some folds make this part of the shirt a bit
darker because it's the same for the for the face okay so I think next I'm going to add
the highlights the brightest highlights to the eyes so I can say that I have learned a few things
with this drawing adding a background and working with charcoal and pan pastel I noticed that
once I smudge over with the pan pastel it can get a bit lighter also what you use if you smudge over
it with the sponge you can lighten so now I'm trying to go over it again and darken some more
so you see that my table the table isn't getting too dirty the pan pastel doesn't have as much
dust as charcoal so when you take a picture of your drawing you can look back at it maybe on
your phone or your tablet on your computer and compare values that way with the reference photo
next to it just look back and forth just want to blend this area just a bit make sure I have
a smooth transition here make sure that you're satisfied with the values
