HOW TO RIDE A MOTORCYCLE (sportbike)

Fact Racing
22 followers
Feb 11, 2026
Today I'm gonna teach you guys how to ride a sport bike.
Before you do anything, make sure you cover up your dash.
You could use duct tape or a sticker
or whatever it is that you want.
When you're learning to ride a sport bike,
the last thing you wanna be doing
is constantly looking down at your dash.
Learning to ride motorcycles is all about
learning how the motorcycle feels.
It's important that you learn this concept now
so you're not relying on the dashboard
to tell you what's going on.
You should always know what gear you're in
without having to look down.
Now, unless you're riding an electric motorcycle,
all sport bikes are manual transmission.
And if you don't know how to drive a manual transmission,
just do the world a favor
and crawl back in your mom's video.
All right, the components.
This is your front brake.
These are your front brake calipers.
There's two of them.
This is your rear brake.
Your rear brake is connected to the rear wheel.
You push the lever down with your right foot
to activate the rear brake.
On the left side,
you've got your clutch lever and your shifter.
I have mine set up in a reverse pattern.
First gear is shifting up.
Neutral is a half a click down.
And then second through sixth gear is down all the way.
So if the bike is in gear,
the rear wheel won't move.
If it's in neutral,
the rear wheel is free.
Your clutch is usually on the right side
and it's activated by this clutch lever.
Remember when I said if the bike is in gear,
the rear wheel won't move?
If you activate the clutch lever,
it loosens up the clutch
in order for the rear wheel to be able to move.
This is what a dry clutch looks like.
Inside your sport bike,
you may have a wet clutch,
but they basically do the same thing.
You see how tight this is?
When the clutch lever gets pulled in,
it loosens the clutch,
which frees up everything in here.
As you let go,
everything tightens back up.
Now you can't move it.
And whatever gear you're in will be activated
and you can use the throttle to move the bike forward.
The clutch is gonna be one of the most important things
when you're learning how to ride a motorcycle
because it's all about the friction zone.
The friction zone is when that clutch closes up
and the organic pads inside the clutch disc
start to come together like glue.
Pulling in the clutch separates everything
and frees everything up
and letting the clutch go tightens everything up.
When you're initiating first gear movement,
it's all about clutch control
and where in that friction zone you are
that you can let go of the clutch and start to throttle.
It's a very delicate balance,
but once you figure out friction zone,
everything else should fall into place
if you're not a complete idiot.
First thing you're gonna wanna do is get on the bike
and try to feel it out.
Feel what the clutch feels like.
Try doing two-finger clutches,
one-finger clutch, four fingers.
Get comfortable sitting on the bike.
It helps if you have a rear stand.
Get a feel for the throttle,
where the rear brake is.
Try not to look down.
That's why I had you cover the dash.
Next thing you're gonna wanna do
is get the bike off the stand
and on its side stand.
Get on the bike and try to feel it side to side.
If you're short like me,
it's gonna be very difficult for you.
Try to feel that weight.
Get that kickstand up.
You might drop it at this point,
but that's okay.
Dropping motorcycles is a part of riding.
You gotta feel for it
if you can push it forward and backward.
Do the one-foot thing
and do this for a little while.
If you're tall enough
to walk the bike forward and backward,
try that.
I'm not tall enough, obviously.
Okay, let's get on the bike,
start it,
and do some friction zone exercises.
But before we do that,
make sure you find a motorcycle safety course now.
They run between $300 to $500.
It's like a three-day course.
They teach you how to ride on like Honda Rebels.
And most of the time,
if you pass the class there,
you'll automatically get your motorcycle license.
Okay, so before you start the bike,
there's two things you need to consider.
A lot of these new sport bikes
have things like traction control, ABS.
They have different power modes.
I personally like just turning everything off
and putting it at the max power it has.
The reason I do that
is so I don't have to learn different modes.
That's all it is.
I'm just lazy.
I don't wanna learn how the throttle feels in sport mode.
I don't wanna learn how the throttle feels in track mode.
I just put it in race mode and delete everything else.
I'm not against electronic aids.
I think they're amazing.
I'm gonna leave it up to you
if you wanna utilize all that stuff.
Okay, I'm not gonna go over how to start the bike
because every motorcycle is gonna be different.
For me, I just turn it on,
keep it in neutral,
and press the button.
Now you're just gonna find the friction zone on the clutch
by letting the clutch go slowly.
You'll feel the bike start to move forward
and you can just walk with the bike just like this.
Pull the clutch in to stop the momentum.
You can hold the brake
or you can stop yourself with the legs.
Right now, it's all about finding the friction zone
with the clutch and stopping with the brakes
or with your feet.
First gear.
And notice how I'm not looking down.
I'm looking forward the whole time.
This is what you want.
And you just kinda wanna go in a straight line.
Pull the clutch in to slow down
and then you can hit the brake to stop.
Very simple.
And if you're gonna drop the bike,
this is the time you're gonna drop the bike.
Back into neutral.
Now I'm gonna show you with the GoPro.
Okay, POV time.
Start the bike.
Get a feel for that throttle.
Okay.
You won't really need throttle in this first stage.
It's all clutch and brake and then finding neutral.
Okay, put it in the first.
Got both my feet down.
Release the clutch slowly and the bike starts to go.
Walk it, walk it.
Pull the clutch in.
Stop with the front brake.
And do this for a while.
Notice how I'm not letting go of the clutch all the way.
Because you don't need to.
Just like that.
Now we're gonna go over the speed bump
and I'm just gonna coast right up it.
There you go.
Come to a stop.
Pull the clutch in.
Brake.
And then you're gonna do that for a little bit.
Just like that.
And for now, you're just gonna turn with the handlebars.
I'll show you guys how to turn in a few.
But essentially, you just wanna do this for a little while.
Find that friction zone again.
And if you feel comfortable enough,
put your feet up just like this.
And you're just controlling the motorcycle with the clutch.
See that?
Just like that.
I'm pulling it in.
I'm feeling the friction zone to get going.
Letting it go.
Pulling it in.
Letting it go slowly.
Pulling it in.
And you can feel what the bike is doing.
You can feel what that clutch is doing.
Using the friction zone is the very first step
to even get the bike going.
Notice how I haven't touched the throttle once.
You can actually, if you're confident,
you can let go of this
and just try to use your clutch to get you to move.
It's so simple.
Just like that.
Okay?
Now we're gonna turn around here.
I'm gonna come to a really slow movement,
get my feet back down,
and then use the clutch and handlebars
to turn me in the direction that I want.
Okay?
And I'm using my feet.
I got my feet down right now.
Again, if you're gonna drop it,
it's probably gonna be in this phase.
Okay, now I got my feet up
and I'm gonna use the clutch
to get me back to where I need to go.
Your wrists and your hands are gonna get tired from this.
It's all clutch.
Just like that.
And if you're really confident,
maybe like 30 minutes of this is all you need
before you can start using the throttle to get you going.
But be very easy on the throttle
and you're gonna wanna let go of the clutch fully.
Okay?
And sometimes, depending on the bike that you have,
you may need throttle to get going with the clutch.
If it's a sport bike,
most of the time, all you need is the clutch.
But don't quote me on that
because some bikes actually need throttle and clutch.
But here we go.
Clutch only.
Bam.
Now I'm gonna let go of the clutch
as I ease into the throttle.
And now we're going.
We're going in first gear.
Just like that.
Now it's all throttle control.
And if I wanna slow down when I go to the throttle,
pull the clutch in.
This is all you're gonna do in first gear.
First gear is how you're gonna learn
how to ride motorcycles.
It's so simple,
but it takes a little bit of confidence
and knowing how certain things work.
Like I said, the clutch is probably
one of the most important parts of the motorcycle
that you're gonna need to understand how it works
to even be able to start riding the motorcycle.
So now that we know how the clutch works,
throttle is something that's very obvious.
But again, you have to be very easy on this throttle.
Don't twist it too hard, obviously.
And you're just gonna do this for a while, actually.
I think in motorcycle safety school,
they teach you first gear only on the first day.
So if you already bought a sport bike,
you can go around your neighborhood
and putt around in first gear.
All right, the next concept I wanna talk about
is countersteer and counterweight
because they're two different things.
Countersteer is the concept of pushing on the inside clip-on
to help bring the bike lower
on the side that you're pushing
in order to help you steer the motorcycle
towards the inside direction.
That means if I'm countersteering on the right clip-on,
I'm trying to go to the right.
And if I'm countersteering on the left clip-on,
I'm trying to go to the left.
Countersteering is more used at the track
or in some instances in the canyons
or long sweeping highway curves.
When you're countersteering,
most of the time your butt is gonna be off the seat
and your body is hanging off the bike.
Counterweight is basically your body
counteracting the weight of the bike.
So if the motorcycle's leaning this way,
I'm gonna counteract the weight with my body
a lot more vertical or more towards the opposite direction.
So the bike is leaning this way,
I'm gonna counteract the weight
by putting my weight this way.
And a lot of this technique is gonna be in the handlebars.
You're kind of pushing it this direction or this direction
while shifting your weight to the opposite side.
Went ahead and marked a couple spots on the road
to try to avoid using counterweight.
One here and one right there.
Here we go.
Find the spots.
Counter, counter, bam.
So the concept of counterweight is pretty simple.
So I'm making a left,
I'm shifting my butt and bringing the bike back.
See that?
I'm gonna go try to make a right right here.
And instead of leaning over,
I'm actually just leaning the bike
and keeping my weight up, okay?
I'm gonna counter left now.
Little bit of front brake, counter.
I'm not leaning to the left.
I'm just leaning the bike over to the left.
Again, you can do all of these techniques
within your neighborhood, okay?
Come to a stop.
This is all in first gear.
Counter.
Releasing the clutch a little bit to get going.
Boom.
Okay.
Counter again right here.
Got the clutch in.
I'm not leaned over.
There you go.
And that is counterweight.
It's very, very simple.
It's really just shifting your bike down
using the handlebars
and keeping your weight kind of upwards.
You're not leaning over.
Okay, clutch in.
Brake, counter right to make that right turn.
Okay.
Counter the bike.
You may notice that I'm turning the bars a little bit
and I'm hitting the brake.
It's a combination of everything
you would learn in first gear.
Clutch in to slow down, brake to slow down.
You can turn the bars a little bit if you need to,
especially if it's a really, really slow corner.
Just because the sport bike has clip-ons
and not traditional handlebars
doesn't mean we can't turn this bike.
You can always turn the handlebars a little bit
to help you steer when you're doing slow maneuver turns.
So again, what you're gonna wanna do
is put those two principles together.
First gear, friction zone, and counterweight turning.
Do that for a little bit.
Do it for like 45 minutes to an hour.
Get used to coming to a stop,
using your friction zone to get you started,
counterweight balance to do slow maneuver turns.
You can even practice U-turns if you want.
And once you get that first gear
really in your head down path,
then we can move on to shifting.
All right, welcome to shifting.
This is the second part.
By now, you should have already been practicing
your first gear, friction zone, counterweight,
theories, concepts within the last day or so.
You can get anywhere around your neighborhood in first gear.
There's no reason for you to shift from first to second
in the first couple of days
unless you're a complete badass.
Here's what you're gonna wanna do
to shift from first to second.
Find yourself a nice straight road,
somewhere in your neighborhood still,
that you can go back and forth on
and shift from first to second.
Make sure it's pretty wide
so that way you can turn around
and go back and forth and shift.
But essentially, once you find that road,
you're gonna give it some gas,
pull in the clutch, shift in a second,
and let go of the clutch
and gas it a little bit at the same time, just like that.
Okay?
And now what I want you to do is shift back down to first,
let the throttle go, clutch in, first gear,
and then slowly release the clutch
while giving it some gas at the same time.
And this is all you're gonna do for a little while.
First gear to second, second gear to first.
That way you can feel both upshift and downshift.
If your bike has a quick shifter, don't use that yet.
First gear to second, nice and easy, just like that.
Second gear to first, let the clutch go slowly,
give it some gas, perfect.
Now, when you're downshifting,
you're gonna feel the bike slow down.
That is normal.
Typically what you wanna do when you're coming to a stop
is downshift gradually into first gear or neutral.
Sometimes what I like to do
is if I'm coming to a stop sign,
I'll put the bike in neutral and come to a complete stop.
And then I'll put the bike in first gear,
look left, look right, and then I'll go, just like that.
Okay, I'm coming to the end of the road.
I'm gonna turn around and practice those maneuvers again.
Here we go, counterweight, perfect, get going.
Here's a stop sign.
Now, here's the other thing you could do
when you come to a stop sign.
Just hold that clutch in, come to a complete stop,
keeping the bike in first gear,
look left, look right, look left again, get going.
Didn't have to even put it in neutral.
Practice your shifting concept again.
Clutch in, woo, put that in the third.
Okay, clutch in, second gear, throttle.
That simple, okay?
Now, if you wanna shift up into third,
just shift up into third the same way.
Clutch in, shift third, throttle.
It's that easy, guys.
The first concept of the clutch is the most difficult thing,
the clutch and first gear.
Now, I'm gonna shift from third to second.
There you go.
Try to be as smooth with it as possible.
That's what the concept of first gear and the clutch is
for the first day,
trying to be as smooth as the clutch and throttle
so that way when you get out here on the regular streets,
you're shifting a lot smoother into the higher gears.
Coming to a stop now, shifting to first.
Let the clutch go slowly.
This'll help me slow down too.
Bam.
Okay, we're gonna go from first to second to third.
So, first gear, we're rolling.
Clutch in, second, throttle.
Clutch in, third.
At this point, you could do fourth, fifth, even sixth.
So, let me show you guys.
Fourth, fifth, sixth.
Really boggy though if you go this high in gears.
So, I'm gonna go back down to third, just like that.
It's so simple, but that's it.
This is how you ride a motorcycle.
Once you get that first gear and clutch,
you can ride this bike anywhere, anytime.
Now, speaking of anywhere, anytime,
one of the scariest things to learn
is your first time on the highway.
So, let's go.
One of the biggest things you could do
to help yourself is to relax.
The nerves will get you.
If you don't relax, it's very likely
that you may drop your motorcycle
because you're so tensed up.
That's why you wanna spend a couple days in first gear.
That'll help you get to know the controls,
help you get to feel the weight of the bike
because the weight of the bike
is probably gonna be the hardest thing
to try to get used to.
Once you get going, the bike does feel nimble,
but when it's static, it feels really heavy
because if you think about a sport bike,
they're about 400 pounds.
They're very heavy motorcycles.
You can start practicing going up hills,
going down hills, using the rear brake a little bit.
I mostly use the front brake when I'm on the streets.
That's just me.
You're gonna learn a lot more in motorcycle safety school.
So, again, make sure you sign up for that,
take the course, get your license.
They don't use sport bikes,
but it is okay to get on YouTube
and learn how to ride a sport bike
before you even take your safety course.
I did.
I was riding a whole year until I got pulled over
and the cop was like,
look, go get your license and this ticket will go away.
I'm like, great.
And that's the only reason I took
the motorcycle safety course.
But at that time,
I had already had one year of riding experience
and just like you,
I learned how to ride motorcycles from YouTube videos.
So there is no shame in learning
how to ride motorcycles in YouTube videos,
because I did it.
And I know a lot of people have too.
If you learn how to ride motorcycles on YouTube,
comment down below and let me know.
Also, if you have any other tips
that might help these guys that are watching,
please comment them down below.
Let's help them out, guys.
Riding motorcycles is one of the funnest things
you'll ever do in your life.
And when people find out I ride motorcycles,
they always tell me, damn, I've always wanted to learn.
I've always wanted to get one.
And my advice to them is go get one and start learning.
And they're always like,
don't I need to take the safety course?
I'm like, yes, you can go that route.
It's probably a little bit smarter,
but if you're a DIY,
do I,
if you're a DIY type of person,
you might just want to learn on your own
in your neighborhood.
And there's nothing wrong with that.
That is completely fine.
You're not going to hurt anybody
by riding around your neighborhood
on a motorcycle in first gear,
unless you're a complete idiot.
Okay, we're about to take this thing on the highway.
The important thing about taking the bike
on the highway for your first time
is to find a stretch that has an entrance
and an exit that's really close together.
Because the first time is going to be a little bit scary,
and I get that.
But all we're going to do is enter,
get on the highway, get up to speed,
and then exit, turn around, and come back.
And you're going to do that for a couple times.
So let's go.
All right, here we go.
Make sure you look.
Get up to speed.
Shift in a second.
And it's okay to shift early.
You don't have to redline the bike.
Okay, this is where you're going to get nervous,
but you need to relax.
Take a look over to your left to make sure.
Signal.
And now you're on the freeway.
And I'm only in third gear.
You can shift it up a fourth if you like,
but you don't really need fifth or sixth gear
for the highway,
especially if you're riding a leader bike.
And there you go.
You're on the highway.
It's chill.
It's not that bad.
So the highway riding is probably the easiest thing
you could do because everybody's going the same direction.
It's not anything different
from learning how to drive a car.
Driving on the highway is one of the safest things
you can do.
There's no intersections.
People are going about the same speed.
Typically people keep a good following distance,
which is nice,
which you should do too.
You shouldn't be on somebody's ass,
somebody's bumper like this freaking a-hole right here.
Look at that.
Don't do that.
Don't do what that guy does.
What you want to do is keep a good distance, okay?
But honestly, once you get over highway riding,
there's not much else I can do for you
because you're riding a motorcycle.
So welcome.
Welcome to the two wheel family.
