The BEST DIY Aquarium Lids!

Fish Tank Serenity
6 followers
I should have made these lids years ago. If you have an aquarium without a lid, this is a great option on how to make your own custom lid for your fish tank.
#fishtank #fishkeeping #relaxation #aquarium #soothingrelaxation #fishtankwithfilter #fishtankentertainment #fishtankledlight #fishtankjoy #fishtanktutorial
Hey fish friends, how's it going? Hope you're doing well. Short video today, I just wanted to share
something with you guys that I feel really silly about not doing a long time ago. This is something
that I've known about for a long time and I feel like I should have done this like a year ago,
a year and a half ago, a couple of years ago, but for whatever reason, I just thought the way that
I was doing it was fine and after I made a change, I realized that the old way was nonsense and this
is much better. Anyway, so let me show you guys what I did. So as you guys know from the thumbnail
and from the title of this video, I'm talking about aquarium lids. Now there are many reasons
why you want to have lids on your aquarium and a lot of it has to do with making sure that the fish
don't jump out, making sure that things don't go into the tank like other animals, cats, things
that could fall in, people sticking their hand in, kids, etc. It could also be to retain heat. If you
do have a heater in an aquarium, it is much easier to maintain the temperature of that tank
by having a lid on and then there are other things like evaporation and stuff like that. So
overall, for the most part, having a lid on an aquarium is very beneficial. Now I have lids on
most of my tanks. I do have a couple of tanks without lids and there are reasons why I do that
but for the most part, my tanks have lids. Now down here in my fish room, I do not heat my tanks
individually. I heat the entire room so retaining heat is not so much of an issue but the other
reasons that I stated are important. So maintaining the level of the tank and not having less
evaporation is important, making sure the fish don't jump out is important. So anyway, I was
using another kind of lid before. Let me go ahead and set my camera down real quick and then I'm
going to show you guys what I was doing and what I've done. So down here in the fish room, as I
shared, I've got a lot of tanks down here and I do heat the room. Now I was using, now some of the
tanks that I have came with lids. So like the 125 has glass lids. My Indian Mudskipper tank came
with a glass lid. My tanks in upstairs in my living room, my display tanks have lids.
But a lot of these tanks were just empty kind of bare 75 gallon, 40 gallon, etc. tanks that didn't
come with lids. I didn't have lids so I had to come up with my own system. What I was originally
doing is I was using these vinyl corrugated panels that you can use for like siding for
like a greenhouse and things like that like or roofing I guess it would be. They are okay.
They're easy to cut. They're pretty flexible, pliable and you can just kind of cut it and stick
it on top of a tank. The problem is that it doesn't fit in the kind of the groove or the inside
lip of the tank. It just kind of rests on top. So there still is like a little bit of a gap where a
fish could potentially get out. And then also you have you know additional evaporation and stuff
like that that can happen. And then it just doesn't look very good. I kind of want to make my fish room
look a lot better. I want it to be more aesthetically pleasing for myself and for all of you as well.
And we'll talk about that in a moment. So anyway what I did is I decided to
go and do the DIY aquarium lid project that I know many other fish YouTubers have done before.
I've seen Cory from Aquarium Co-op do it. I've seen Bob Steenfott do it. I'm sure many others
do this very same thing. And basically what I did is I got that greenhouse paneling that's
double walled. And this is what it looks like. I will put a picture of it right up here so that
you can see what it looks like. And you can see how much it costs. It was a 24 by 96. So
two feet by eight feet panel. And it's like $38 at Home Depot. And I'm sure I looked on Amazon.
It was kind of the same price. And maybe if you went to Lowe's it'd be pretty similar. So
about $38, $35 to $40 for a panel that's basically two feet by eight feet. And I bought three of
them and I was able to make 16 lids for various tanks from five gallons to 75 gallons and
everything in between. Very, very easy to use. I ended up using a table saw to cut it just because
I was making a lot of them and I wanted to have very precise cuts. I did do a little bit of
trimming with some shears. And I also experimented by using like a utility knife.
That could be done if you like scored it on both sides and then kind of bent it and snapped it. So
if you're making like a small one, I would say that would be fine. But definitely if you're
making a bunch of them or larger ones that you're going to want like a table saw or something that's
going to allow you to make large cuts. But anyway, very durable and very insulating. So it does have
a lot of insulating properties because it is double walled. So you have these channels that
run in between. And so there's air and anytime that you're trapping air between two surfaces,
that's essentially working like an insulator, like bubble wrap as an example. So it does very
well in retaining heat. I've noticed this because upstairs in my office, I did put it on one of my
tanks that does run a heater in the tank. And I noticed that it was very, very effective in
retaining the heat. So very happy with that. Very easy to customize, cut out little notches
for like things that drop into the tank, whether it's an airline or a power cord or whatever it is,
you can very easily notch these. And what you want to do is you want to cut these to where they fit
inside the inside groove of the tank. So you just have to measure the inside measurements
of where the rim is and just make sure that you measure twice and cut once and then you can pop
it right in. I would say to make sure that you go a little bit on the large size. So if you do need
to make a cut, you're cutting down more and not having to wish you could add material. And then
you can very easily trim it by hand. I just use some shears that I use and it was very easy to
trim. So anyway, nothing is special. I did add these little hooks on there. These are like those
3M hooks or whatever that you would like hang your stockings at Christmas time or hanging pictures
and stuff like that. I just got these little clear ones. They're probably not going to show
up on camera, but maybe if I hide my face, maybe not. But anyway, and then I just put that little
3M pull tab or whatever. But so they're very, very stuck on there. So I can just use that as
like a little handle to just lift up when I want to feed my fish. But anyway, nothing, you know,
earth shattering. I know there's been other videos about this, but I was thinking that, you know,
using these would be okay. And these are okay for like large stuff. So like I would put this
outside on the pond. I would put this on like a really large tank. If I have like a, like a 2000
gallon tank, like Joey uses where he uses these kinds of lids, King of DIY, that would make sense.
But for smaller tanks, 40 breeders, 75 gallon tanks, even like a 125 because it's sectioned
off, this is going to be great. It is relatively inexpensive. It's very durable. It's nice and
flush. You can rest lights on top, et cetera, and you can make it fit inside the tank. So anyway,
again, I will, well, I think I already put the picture up there, but I'll put it up there again
so that you guys can see what it is. So if you do happen to be in the market for an aquarium
lid for your tank that you bought at the gallon, you know, dollar per gallon sale or something like
that, and there's no lid, go to your hardware store and get some of this paneling and it should
work out just fine. Before I go, I did want to mention, I mentioned earlier about wanting to
make this fishroom more aesthetically pleasing. I've gotten a lot of comments about like,
my walls are too silver. Let me grab this here. So I've gotten like questions, like comments about,
it looks like a refrigerator in here. And maybe the sound is not so great. And you know, the
lighting's kind of, I got like weird lighting. Like if you look right here, this is like,
like a work light, you know, like you would just buy, it comes with like a little clamp and you
buy them for like $5 at the hardware store. And I just took off the clamp and I hung it. So it's
like a little pendant light, but for some people it looks a little hokey. So we're going to make
some changes down here. I can't tell you what's going on. I can't tell you any details other than
I'm very excited. I've been excited for a couple of weeks now. There's a bunch of products, like
so much stuff sitting in my garage right now that is going to be going in this fishroom. So in the
next couple of weeks, we will have some updates there. So definitely you'll want to come back
and check that out. So anyway, that's all that for now. Thanks for watching. Oh, don't forget
to go to my website, TazawaTanks.com and get your Tazawa Tanks t-shirt. And anyway, catch you on the
next one.
