How to Paint a Realistic Cat with Watercolor - Step by Step Tutorial

Classical Kids Arts
76 followers
4 Video ViewsยทFeb 8, 2026
Comments are disabled for this video.
I thought it was a photo.
If you've ever gotten that comment before,
you should be proud of the hard work
and attention to detail you put into your painting.
Painting photo realistically with watercolor is possible,
but it presents some challenges.
For this video, I'll show you how I painted
this realistic cat from a photo,
and I'll share some of my tricks for painting
something that will make your viewers say,
is that really a painting?
If you'd like to try this painting for yourself,
you can download my reference photo and sketch
using the link in the description.
As always with watercolor, you need to plan ahead
for the areas of lightest value in the painting.
I begin by using masking fluid to paint on the whiskers.
I'll remove the liquid latex
and refine those bright white areas later in the process.
If you'd like to learn more about masking fluid,
you can check out my video that's dedicated just to that.
It took me about six or seven minutes
to carefully paint in all of the whiskers.
I did not do some of the finer lines
because I'll actually go back in with gouache
for the tinier whiskers and individual hairs.
With the white of the whiskers
safely protected beneath the masking fluid,
I can freely paint over those areas.
I wet my paint with my spray bottle,
and I decide to paint the background first.
There is a blurry bit of brightly lit fur
along the back of the cat's neck in my reference photo.
My intention is to create a soft furry edge there
simply by wetting the paper,
painting wet into wet, and painting the dark background
almost up to the edge of the wet paper along the neck.
The background color bleeds a little into the neck
and does the job for me
of making the neck look fuzzy and soft.
This technique takes a lot of practice.
I'm definitely still not perfect at it,
but if you paint a lot of animals,
I do think it's a necessary skill to learn.
My background colors are a combination of sap green,
neon blue, lamp black, and touches of ultramarine.
Next, I paint the background
on the other side of the cat's head,
generously wetting the paper first with clean water.
There will be just a couple of intentional hard edges
along the nose, so I paint around those.
I paint the blurry ear using watered-down indigo,
then start dropping in background color,
working quickly while the paper is still wet.
I'm just grabbing lots of different colors,
sap green, viridian, phthalo blue,
moonglow, burnt umber, indigo, and black.
The colors need to be dark enough
to provide a strong contrast
with the cat's white mouth and neck,
and I need to keep in mind that they will dry lighter.
I dab along the edge of the neck to create a fuzzy texture.
Blurry backgrounds are one of my favorite things
to paint in watercolor.
You can clearly see at this point
how the whiskers remain protected by the masking fluid.
I remove the masking fluid in the background area
and tighten up the whiskers
just using my green background color.
Another method I use for blurry whiskers
is to take clean water on a round brush
and just paint the whisker with the water,
then lift out the paint from that wet shape
using paper towel.
For the eyes, I use watered-down viridian and yellow ochre.
The shadow around the eye
will eventually be the darkest value in the painting.
I begin to layer on some shadows
and stripes above the eyes.
The forehead is a very cool, light gray,
and the fur inside the ear is also a cool gray.
I add a pop of burnt sienna around the rim of the ear.
There are some areas in the cat's face
that are a warmer, light brown tone,
so I'm beginning to block those areas in.
I add another wash of very light blue to the ears.
For most of this painting,
I used my silver black velvet size 2 round brush.
I add burnt umber below the ear,
painting around some small fur highlights.
I then decide to finish the eye.
This is just a process of carefully painting
the black pupil, the eyelids,
and the dark fur around the eye.
I use really short, quick, light brush strokes,
kind of a scrubbing motion even,
with the tip of my brush to create the effect of fur,
sometimes splaying the bristles.
My colors here are lamp black, burnt umber, and burnt sienna.
The next step involves darkening my values all over.
I use Moonglow for my base layer,
painting on a nice, wet wash all the way around the eye.
I charge some yellow ochre into this wash,
allowing the two colors to bleed together
and intensify the warm values with burnt sienna.
Using that same technique
of laying down two very wet colors side by side,
I paint a watered-down phthalo blue on the chin.
The neck is painted really quickly.
With a rich black and Moonglow combination,
I'm careful to blend my edges.
I put some Moonglow wet on dry into the white neck
and block in the black stripes on the side of the face.
To make sure it all looks connected,
I either blend edges with clean water
or I push around the color
with the splayed bristles of my brush
so that the edges are transformed into soft fur textures.
I drop in splotches of burnt umber.
This part of the process is both exciting and scary.
I paint the neck stripes wet into wet
so the paint will soften.
It's really important to paint your base layers
wet into wet.
This helps you establish your colors and values
while keeping everything soft and blended.
As that begins to dry,
I go in with more details
using the fine tip of my round brush.
Painting realistically is a delicate dance
between blocking in large areas quickly
and then adding fine details.
I love to get lost in the process
and I really enjoy bringing a blank piece of paper to life
just with colors and brush strokes.
I add just another layer of blue to the chin.
The fur on the nose is created
with quick, short brush strokes
using the splayed bristles of my size two round brush.
The nose is really simple.
I start with a black outline and the nostril
and then I let that dry for a while.
I refine the ear,
adding more fur texture and deeper values.
The key to painting realistically is to paint in layers.
This takes patience for sure.
I use Moonglow to paint a light shadow
where the mouth curves around.
Moonglow is such a versatile color.
To learn more about this beautiful pigment,
you can check out my video
on using Moonglow to paint horses.
In order to soften the edge along the back of the neck,
I wet the dry paint with my brush
and then gently scrub it out with a paper towel.
I'm continuing to just add more details,
adding lots of little fur textures with my round brush
and I'm intensifying the color in the eye
and paint in the pink nose using Quinacridone Rose
and a little bit of Burnt Sienna.
I also paint in the little spots of dark fur
near the whiskers.
I can really get into the finest surface details now.
I'm painting very slowly,
always glancing at my reference photo to check my values.
Painting hyper-realistically requires a large block of time.
I remove the last bits of my masking fluid.
Make sure your paint is completely dry before doing this.
I'm now refining the whiskers,
making them just a little skinnier, not so stark white
because I'm not a purist about such things.
I'm okay with using white gel pens
and white gouache for whiskers too.
For this painting, I actually did start
with some of the gel pens,
but they didn't take well to this surface.
So I switched to the white gouache
and that worked great for adding the very fine whiskers
and a few more wisps of white fur along the neck,
along the ridge of the nose and above the eyes.
Altogether, this seven by 10 inch painting
took about two hours.
I hope you enjoyed this video.
If you did, please be sure to hit the like button
and subscribe if you're new here
and turn on notifications so you never miss a new video.
I'll be posting new videos every Tuesday,
Thursday, and Saturday.
And be sure to tell your friends
who are interested in watercolor about my brand new channel
and follow me on Instagram.
I'd love to see you there.
Thank you so much for watching.
