Modifying My Yamaha Adventure Bike in a Snowstorm!

Two-Wheeler Technology
5 followers
6 Video Views·Feb 8, 2026
Modifying My Yamaha Adventure Bike in a Snowstorm!
Adventure motorcycles and adventure motorcycling
is the fastest growing and largest segment
in the motorcycling industry.
And there are a whole lot of choices out there
when it comes to picking out bikes.
Unless you're me, then the choice is pretty obvious.
I want it to be blue,
and I want it to feel like a dirt bike.
And I also want to be able to afford it.
That leads me to one option.
It's kind of like the Honda Civic
of the motorcycle world right now.
They're cheap, they run forever,
and the aftermarket goodies are endless.
Guys, I pulled the trigger, and I picked up a Tenere.
This is a 2024.
I picked it up, actually used from a dealership,
and I got a smoking deal on it.
It only has 550 miles on it,
and the guy added some goodies.
Can't beat that.
However, these bikes are designed to catch
the mass majority of the people out there
that are buying them.
And I'm not sure I quite fit into the mass majority.
I have a couple rides planned for this year
that are gonna get this bike off-road
and out into the wilderness.
So I need to prep it in order for my mission.
And my mission is to turn this bike
kind of more into the dirt bike side
of the adventure bike world, if that makes any sense.
Winter storm warning goes into effect at 10 p.m.
And this is a monster storm.
Continues into the overnight period
through tomorrow morning
with the heaviest, steadiest snow continuing.
If you don't need to drive, don't drive at all.
Check this out.
This is my setup here.
This is cameraman Dan.
I just replaced Dan with a shop vac.
Can't replace Dan with a shop vac.
Are you kidding?
All right, let me show you guys what I got.
We'll start at the front this time
and work our way to the back.
How's that sound?
This is running the stock,
I believe Scorpion Rallies are stock.
There's a high fender kit on it.
Has a black fender.
I don't like that.
We're gonna address that.
This mount here was for crash guards.
It actually had an upper and lower set of crash guards.
I pulled those off because I wanna make it
more of like a dirt bike.
Skid plate.
There was a APX skid plate on it
and it was the one I was gonna purchase
or would purchase for one of these bikes anyway.
But that's off doing some other stuff right now.
I'm not happy with the brake line setup here.
Super not stoked on this brake line setup on this side.
So we're gonna address that.
Turn signals.
We're gonna address turn signals.
There's a aftermarket set of levers.
Not sure yet if I like them.
We'll have to see.
Tenere.
We're gonna address this right here on the forks.
I'm actually gonna move the fork down,
but my plan is I'm also gonna respring these forks,
possibly even revalve them.
So we'll address that when that comes.
Let's see, what else do we got here?
Oh, we have a nice CNC reservoir guard there
for the coolant.
Again, the skid plate's doing something else at the moment.
Oh, we have the Camel Toe kickstand.
Good mod.
And we have the Camel ADV 20 millimeter lowering link.
Turby's chain guide.
All stock back here.
I have some goodies coming.
I'm converting this from 520.
No, 525s.
I think that's a 525 chain.
I'm converting from the 525 to a 520.
The idea behind that is it's going to spin up
a little faster, less rotating weight,
get a little more snappiness out of this thing.
Looks like we have stock tire.
Delete on the rear fender doodads.
Clean that up a bit.
There is one spot over here,
and this was, well, that's what it is.
The problem with that is this is all one piece.
Good news is it comes off pretty easy,
and I'm replacing it anyway.
All right, what do we have over here?
Stock exhaust.
Looks like we have a upper reservoir guard,
master cylinder guard, Turby frame protectors.
Oh, this has the clutch, extended clutch lever here
with the bracket, with the brace,
so that makes the clutch easier to pull.
Yeah, so we pretty much have a stock 10 array.
It's a 2024.
That means it's still throttle cable.
It's not throttled by wire,
and it doesn't have traction control.
Now, I haven't gotten a chance to ride this bike yet
because I just picked it up a couple weeks ago
before the end of the year,
and it's been just ugly weather ever since,
and now we're snowed in,
so I'm not gonna get a chance to ride it,
and I'm itching to tear it apart,
and I got some goodies that we can start throwing on it
while other goodies are in the mail.
Of course, the mail donkey's probably snowed in too,
but anyway, one thing I did notice
is I don't think I like the handlebars.
Let's see here.
Yeah, just sitting on it and what little I did ride it,
I wanna bring these bars in.
These bars are too wide.
My ultimate goal here is to make this
really feel like a dirt bike.
Hmm, we got a little work to do here,
and I ordered a couple parts so we can make it better.
First thing I did is I ordered a blue fender.
We're gonna change the black out for blue,
and that's gonna look better already.
What else do we got?
Here's what we came so far.
I got a grab handle for the side.
May not need brakes where I'm going,
but I need a grab handle.
I got heated grips.
I got a dongle.
This is the LSK ABS dongle,
and what this does is this makes the bike
actually function in the ABS system
the way it should.
There's an ABS button right here.
Bink, bink, bink, bink.
But every time you start the bike,
this bike doesn't have memory,
so every time you start it,
you have to turn the ABS back off.
Now, you would think it was as simple as up in here.
However, apparently it's not.
You have to go into the scroll button
and do a bunch of things there in the menu
to get the ABS off.
That sounds like that's not fun at all.
So what this dongle is supposed to do is ABS,
you can just use this button,
and you pull over and you stop
and hang out with your buddies, have a sandwich,
and fire the bike back up and head off down the trail.
You don't forget to turn your ABS off.
That's no good when you're off-road.
That'll put you on the ground real quick.
So it keeps the memory.
It plugs right into the ECU.
Everything should be ship-shaped.
There should be no ABS lights on the dash.
So I'm excited to see that work.
I'm excited to see how these handlebars work.
Foot pegs, we're gonna replace foot pegs.
New grips to go on a new set of bars
because, like I said, I'm not jivin' with them bars.
One with the foam rally grips.
What else we got?
So the Atterby's Enduro X handguards.
We're gonna see what those are like,
so we might try them on here.
I'm also gonna pull off all the plastic
because that's getting replaced.
I'm gonna go with the polyurethane type.
It's like a dirt bike plastic instead of the ABS plastic.
It won't crack like this stuff here.
It's not as brittle.
It's more flexible.
It's a couple less pieces.
I think the first place I'm gonna start
is the handlebars.
I wanna get that situated because then
that's kind of my anchor point
and everything can go off of there.
That should be fairly simple.
We're gonna pull these off.
I'm gonna set those on, make sure I like the bend,
make sure everything's jiving there,
and then we can start building out the bars,
swapping that, and I don't know.
We're gonna go from there.
One thing on this Tenere, you have the dot here,
and that goes forward like it does on most bars, all bars.
And your front, you snug up, and it'll close.
So here, see how there's no gap right here on the front?
But there's a gap back here on the back.
So what we're gonna do is we're just gonna run this one in,
just snug, bink, and then all the clamping is done
back here on the back one.
Get them snug, set your torque, and you're off to the races.
Let's see how these feel.
I like that.
Something ain't quite straight.
It's my bifocals.
It's my bifocals that are making stuff not look straight.
I think this is it.
I think that's the bar.
Awesome.
I'm happy with that bend.
So what I'm gonna do is strip these bars.
Quickest, easiest, bestest way.
Well, easiest way to do this is swap bars back.
Cool, I'm pumped on that.
We're just gonna set these back in here.
Snug up those tops, and then when you snug the bottom,
it's actually pulling on the top
and actually tightening the tops as well.
Okay, so we need to pull.
I need to pull mirrors.
I love these grips.
These are good grips.
I'm not sure the grips I got are gonna work
with the throttle.
We'll have to see.
All right, first steps first.
We'll worry about that when we get there.
Let's pop these off.
Yoink.
Why, they look tall.
It's all right.
Now we're gonna get those set,
and we can start building out the rest of the bar.
Okay, now that I have the bars set up,
really close to how I want them,
the next step is gonna be hand guards.
This is what I went with,
the Atcherby's Enduro X hand guard.
Should look pretty good.
That's what I'm going for.
We're going for looks.
Now, what I'd suggest is if you're in the trees
and you're doing really tight Enduro-type riding
and whatever, get rid of these wedge deals
that hold them into the handlebars
and use the threaded inserts.
It's way, way better.
They won't come loose on you.
For this application, I think these are gonna be fine.
Atcherby's.
So the handlebars are tapered.
So when you're putting guards on,
one thing you gotta notice is there's a fat side
and a thin side to these bushings.
Let me show you that.
Thin side, fat side.
This here, this side's thicker than this side.
So we want the thin side to be towards the grip.
So that said, I need this one.
Okay, maybe I misspoke.
The fat side needs to go up towards the grip,
not the thin side.
I was backwards.
Backwards in my thinking.
Stinking thinking.
All right, now, how am I gonna get this here at all?
Let's get that snugged up.
Looking right.
Brake back where it belongs.
Throttle back where we want it.
Now, one thing you wanna really make sure of
when you're putting wraparound guards on like this
is that your throttle is not sitting proud of the bar end.
You want the little bar end sticking out.
That way your throttle's not sticking on here.
I'm just gonna kind of just leave everything snug
for right now.
Make sure I like how everything is.
And do the other side quick.
That is looking pretty good.
I don't have everything quite tight yet.
Now, big pro tip here.
This is a five millimeter, I do believe.
Five millimeter for this one here.
Figure out whatever Allen wrench it is
that your hand guards are.
They're generally all the same.
And then find a piece of hose, cut it,
zip tie it somewhere, or stick an Allen wrench
somewhere up here on your bars
so that you have easy access to it.
That way if you fall or hit a tree
and these things get loose,
you can just stop really quick and cinch them up
and be on your merry way.
Just play here for a second.
See if I can get this to sit a little nicer.
And once you have everything where you like it
and how you want it, what you're gonna wanna do
is come back through and Loctite everything.
You want everything good and Loctited
so that these things don't come loose.
Okay, now the fun part.
See what these look like.
Forgot to put my grip doughnuts on.
That's a real bummer.
Well, next time.
You wanna Loctite these as well.
Make sure these are not gonna fall off.
Let me bring you guys in here
so you can see what this looks like.
Okay, I think that's enough nutsin' around
right now in the shop.
I got that done, and now since it's snowing
and I hear the kids outside,
I'm gonna go have a little fun in the snow with the kids.
We'll be back.
Okay, we're back, and this time I have Dan with me.
Not shop-vac Dan.
That's a Dan?
That was Dan.
Oh, the resemblance is uncanny.
Yeah, he did a pretty good job, actually, Dan.
You might wanna look out.
Anyway, we're back.
The snow has subsided, hopefully for everybody
here on the Northeast.
Anyway, what were we doing?
Oh yeah, that's right.
Last time we put on the handlebars
and the hand guards, lookin' sharp.
I did forget my grip donuts, dang it.
Anyway, we'll do that next time.
Now, I didn't like this black front fender
from the beginning.
It has a high mount kit on.
This is probably like a nice CNC high mount kit
or something is my guess, but I don't like the black.
It's just not jivin'.
It's not fittin' my program.
So, I'm gonna yank that off really quick.
Let's see here.
Now, I do have, believe it or not,
I do have a high fender kit ordered from Porzilla
because I realized when I was on the line
doin' some diggin' for stuff,
I never gave it a thought,
but I could actually order GYTR stuff off of Porzilla.
So, I did.
And the high fender kit was one of the things I ordered.
So, I'm really curious to see how Yamaha does theirs.
This one here is okay, I guess,
but what I don't like is there's a lot of distance here
and I think it kinda looks hokey
and it puts the fender down low.
I don't know.
Now, it maybe left some room here for crash bars
because this is where the front of the crash bar's mounted,
but anyway, I don't like it, the black.
So, we're gonna get rid of that.
And all I did was grabbed a Cherubi's fender
off of pretty much every Yamaha from ever to now.
Front fender, YZ250, 450, 10 to 17,
WR450, 12 to 17, YZ125, 250, 15 to 17,
blah, blah, blah, the list goes on.
Anyway, let's see what this looks like.
I'll be honest,
it looks better already is what it looks like.
A lot of guys run the low fender.
I'm not sure how much of a benefit this is gonna be
other than just aesthetics.
Unfortunately, I did not get the low fender with the bike.
I don't know what happened to it.
Probably tossed it,
but I may try to piece something together,
just switch it up every now and then.
The low fender does look kinda cool,
but look at that rally look.
Some guys will actually cut the back of the front fender off
when they do this.
I don't know if I will or not.
Maybe, we'll see.
But for right now, it does look so much better already.
I really like it.
I like it.
I'm still not quite satisfied with how low it sits,
how much room there is in between here,
but for right meow, we're good, cool.
Now onto something that's a little more functional,
foot pegs.
These foot pegs are fine if you're taking your 10 or eight
and you're commuting back and forth to work,
taking the kids to the soccer game,
taking your wife for ice cream, that sort of thing.
How many kids are you gonna stack on
to go to a soccer game?
Yeah, I've seen some pictures.
So we need to get rid of this stock foot pegs.
This rubber is no good when you're off road.
I don't know if there was an attempt made here,
but not for what we're doing.
So I grabbed a set of the Flow Motorsports pegs.
These are the same pegs I put on my YZ250.
These are actually a 12, I think 12 millimeter.
It actually drops the peg down and back a little bit.
Oh, there's an R for right, or else it's race.
I don't know.
YZ85 to YZ450F and FX,
1999 to 2023.
We don't have any of those things, Dan.
We have a 24 10 array.
These pegs are super, super close.
I kind of just guessed that they would fit
and they're really close.
However.
No cigar.
Not quite.
It's just catching the edge of that bolt a little bit.
It's not allowing the peg to actually sit down
in its home where it needs to be.
Well, let me get them on
and then we're going to have to do a little massaging.
And it is a fit, I tell you.
That spring is, that comes with these pegs.
It's really stout.
It's nice.
Nice to have a good stout spring.
Okay, now you do want to put grease on your pin.
I did grease my pin.
You want to grease your pin.
Let's see if we can get this closer.
Still think it's going to be easier to massage
after I get it on there.
You gotta trust me.
You just gotta trust me.
Let me do the other side here quick.
Cutter pin comes out, pin pops out.
Just like that.
Old peg, new peg.
Ooh, stickers.
You guys know what we do with extra stickers, right?
We throw them in merch orders.
So check out thebeardedmechanic.shop.
Get yourself an awesome hoodie,
maybe some tallow, coffee mug,
all sorts of cool stuff on there.
There's my pin.
A little grease, and then rub it on your boot,
and that helps waterproof your boot.
Yeah, that slid right home.
Nice, okay.
Dan, you might as well set the camera down
because I gotta file this edge here just a little bit
so it doesn't hit that bolt, this edge here,
so it doesn't hit that bolt,
and then the peg will sit down flush.
Okay, now that we have that filed
and our pegs are sitting good and flush,
even, right where they're supposed to be,
we're gonna put in our cotter pins.
I'll throw this one in here, see if I can spin this.
That'll send good, I like it.
Throw these back in the box.
Do the other side.
Okay, foot pegs are now on.
Let's recap where we're at
just because it's been a couple days.
Believe it or not, movie magic, woo-hoo!
Anyway, so we got our high fender kits on,
hand guards are on, new bars are on, foot pegs are on.
Next is gonna be, what do we got?
We got a couple things here.
Plastics, check it out.
Radiator, radiator guard kit.
This is GYTR, I was doing some Googling
and this popped up, Partzilla had it.
So I threw this in the cart
because this looks way better,
along with a couple other things
that we'll get to here in a bit, but check this out.
This is gonna look way better, yeah.
Come here and look how hokey this is.
Yeah, this is gonna look way better.
That's gonna go on and we'll get to that
when we pull the plastics here in a second.
There we go.
It's gonna look like a YZ, coulda thunk it.
Pretty excited for these when I look.
Look at that, all bendy, oh boy.
Oh boy, I was right.
Get that chucked up, whoa, I have it upside down, hold on.
Got so excited I forgot my lefts from my rights.
Let's try that again, there it is.
Yeah, that'll be cool, let's zip this here off.
It's getting warm, I'm gonna take off my hat.
These just kinda lift up and out, pop it apart.
Yeah, see these don't flex nearly like those do.
Okay, we're gonna set them aside, it's my weekend project.
How about we do this, let's put the bike
up in the air a bit, Dan.
It's always a good idea if you have a bike like this
or your dirt bike or whatever, you're getting out
and away from things, to work on it out of the tool pouch
or tool roll that you're gonna be carrying.
Let's pop the seat off, where'd you drop it?
Right down into the air filter, oh, that's good.
Yeah, it's filtering, it's working.
Now, this'll pop off.
Might need to reuse that piece,
I'm not sure, that little rubber gasket, let's take a look.
I think this is a great upgrade to the bike.
I mean, these kits are like 320 bucks or something.
Get a bike that has good OEM plastic on,
pull it off, spend 300 and a couple bucks,
replace it with something you don't care about as much.
You can get a bunch of cool colors.
I kept it blue, but you can have other colors.
And then, you ever go to sell the bike,
just put the nice stuff back on, you know what I mean?
Plus, this is kind of a fun project to do
on a Saturday morning when you can't go ride,
or a Tuesday night, I don't care.
Don't matter to me.
Got our pins lined up, it's all looking good.
Got the bolts in already.
Okay, I guess this is one thing we should talk about here
before I close this up.
These are the tabs that hold on this tank cover, okay?
See how that's designed?
And this is the hook that they go in.
So, what you do, when this is on,
you get one of these trim tools,
and you kind of just feel your way,
and you'll feel it when you hit it.
And then, you just pry it, just,
and it scares you, but you just gotta do it.
You won't break this.
Once you get over that fear, the rest is really simple.
You do it once or twice, and you're golden.
Now, we'll pop that on down there.
Oh, dude, that fits like a glove.
Really?
There, now it's snapped into place.
Okay, dude, that is a nice fit.
Did I ever finish my Partzilla story,
or did I get sidetracked?
Partzilla story, Partzilla story.
They had this GYTR, they had a couple pieces in stock.
So, I threw them in a cart, and I ordered them,
and I thought, man, I got them.
I never thought of using Partzilla for GYTR parts.
Never dawned on me.
So glad it did.
All right, how about we do this?
Because it's gonna make our lives a whole lot easier.
We're gonna take that front fender back off.
Get that out of the way.
All right, now.
Now.
Now, maybe we can see what's going on here better.
Ken, check this out.
Look how tiny that ratchet is.
That's a twerp.
I know, right?
And check out this little guy.
How cool is that?
It's like a little kitten ratchet.
I love tools.
Tools are my favorite.
Back to where we were.
That just pops off.
You wanna look in to see if anybody is,
I'm sure somebody's doing radiator guards,
radiator braces, not guards, but braces for these.
Now, let's see how these side panels go on.
Where'd I put side panel?
Here it is.
Does that piece get changed?
What else do we got in this kit?
What are these things?
And where do you reckon they fit, Dan?
What do they look like?
There's people laughing at me right now, Dan.
Stop laughing.
I'm not laughing at you.
Everybody yell at your screen
if he's getting warmer or colder.
There it is.
There, it's like that.
Are you sure?
Yep.
Okay, well, maybe we get the option.
Maybe we keep this.
Maybe we, ah, let's just take it apart
and we'll see what we figure out.
Right?
Right.
I'm having second thoughts
about putting those big blue side panels on.
One of the cool things about these bikes
is you can strip them like super fast.
Field strip it.
Oh, this just lifts up and slides back.
There we go.
Let's see how some of this stuff goes together here.
This back piece would be the next step.
It's like we've got a little plastic burn.
It's all right, though.
What do they call it, livery?
The livery will take care of that.
Okay.
Now, do we want to put...
Oh, geez.
Which way did this go?
Do you remember?
It'll be easier to put on.
Two pieces in one, right?
Yeah, I'm just debating if I like the looks.
Well, no, like there's too much blue.
Yeah, versus keeping some black.
Look at that meatball
with how excited you were about the fender.
I know.
I'm really throwing you for a loop, aren't I?
I mean, I think that is a good look.
The black?
Yeah.
I kind of like the black.
It's going to make this here maybe a little wonky,
but I can, that'll tie together.
I tell you what, we're this close.
Let's just do it and see what it's like.
All right, well, let's get the back together again,
and then everything else should start lining up.
What would you do that for?
I tell you.
I knew that would come together better.
Once everything was lining up, that fits way better.
Now the trick is, do you remember which ones went where?
Of the screws?
Yeah.
You mean they're not all interchangeable?
If you're losing track of your screws,
I think you should use your own cardboard trick.
Would be smart of me.
Now, let's see if we can get our plastic pins in here.
Awesome.
I think I know what's happening.
So the way this hardware works is
it just clips over the plastic,
and there's a hole in the top, a hole in the plastic,
and then a threaded hole in the bottom.
And I think the hole through the,
I don't know what they call them, J-nuts or whatever,
these little clip-on things,
and the hole in the plastic isn't quite jiving,
and that's why it's not wanting me to get that bolt started.
I thought I could just power through it,
and it's not letting me.
It doesn't like anything I'm trying.
Sometimes you just gotta walk away and get a drink, Dan.
That's a lot of work for a piece
I'm not even sure I like yet.
Oh, geez, that was our problem the whole time.
Dan, I'm an idiot.
It's an M5.
I'm trying to ram an M6 in.
That was my problem.
That was my problem all along.
Okay, I think that's what I need.
Let's try this.
So much easier.
So much easier when you use the right hardware.
Okay, that is all on.
How does that look?
Oh, that looks so much better, right?
Up front here.
That's cool.
All right.
All right, do that to the other side.
Yep, I'm gonna do that to the other side quick.
You're doing, now you can do it even faster.
Do it in my sleep.
With twice the number of mistakes.
Start with this one.
There, that's more better.
Before we put that side on,
let's see if we can figure out where this hooks up at.
Oh, hooks up under the seat, okay.
So we'll mount this near the battery
and then this just unplugs, boom, boom.
Okay, we'll do that next.
That's the ABS dongle.
It's a stupid bolt again, Dan.
I think I grabbed too short of a screw.
Oh, okay, that was my problem.
See, I got short ones and long ones in here
and I grabbed the short one.
I think the stickers, once all the decals and the,
what are they, like I said, what are they called?
The livery.
Once that comes, we'll be golden.
Now, let's take a look here.
We are going to unplug this.
Plug into here.
This will plug into here.
It is that simple to fix this ABS issue on this bike.
That is awesome.
And then this.
Oh man, dude, there's even a mount for it.
What?
No way.
They 3D printed this little case for their widget inside
and it has a little hanger
and there's a little prong right here on the battery box.
Clips right in.
Right in.
Our wires are good and tucked away.
That puts the LED light up so we know what's going on there.
Oh man, I'm pumped about that.
That's cool.
All right, so let's put this on.
I think this is gonna look neat.
Purely aesthetics.
Switch out the bar pad.
Yeah, that's cool.
I like it.
Now, back to what I was doing before I got so sidetracked.
This headlight unit up here is all one unit.
This outer shell, the lights,
you gotta like replace the whole assembly
if you fall and break it.
So, I grabbed one of these.
This should be a really quick install.
It should just be four screws, actually.
Yep, that's just bolts right there.
Let's pop these off.
Just came with some rubber grommets to put in these holes.
So we got the grommet
and then that lets it stand off a little bit
from the headlight lens.
Stops it from vibrating and chattering
and doing all sorts of stuff.
Let's see what we got here.
Oh yeah, that would be pretty awesome.
I like that look better than putting a cage over it.
Cages look cool on some bikes.
I don't want it on this.
Man, starting to look like a dirt bike
getting this thing off-road ready.
We're not gonna put the bag on just yet.
See if this'll work.
I want it to.
Okay, grab handle won't work with the new style plastic.
So, if you put the Artec plastics on,
you can't buy the Zeta hand guard or grab handle.
Well, you can buy it.
It just won't fit.
Front fender.
Now, maybe some of you noticed
there's extra hardware here
because it depends with these plastics.
We didn't have to replace all the screws.
So, what I'll do with that
is I'll put it all here in my toolkit
so that I can have extras.
That way, if I lose something,
I'll have a couple extra bits and bobs of hardware with me.
Yeah, that's looking good.
Like I said, the decals, when they come in,
that'll make it look cool.
I got one more trick up my sleeve here for the moment.
This is something I'm really excited about.
This is the one-piece GYTR rally seat.
It's a little flatter, it's a little higher,
a little flatter, little different contour in here
so you can stay a little farther in front on a bike.
It does have some grippers.
And of course, we have this strap here
just to make it DOT compliant.
Oh, underneath here, we do have a place
to put all the paperwork for your bike.
You can store it in here.
And another thing this seat does,
well, we have this awesome fabric on top.
Stays nice and smooth, helps your bum.
Also stays waterproof.
But this will give us some more clearance.
So we have clearance, Clarence.
Somewhere underneath the tank.
So we can put a couple more doodads in underneath our seat.
For storage.
But dude, look at this.
It's gotta go front quite a ways.
There we go.
Still not.
Why is it that?
You gotta fit, please, seat.
I'm not gonna be able to go on.
I'm not gonna be able to go on if you don't fit.
That needs to go, though, quite a bit.
That can't be right.
Is that right?
Something's not jiving here.
Oh man, either I'm gonna be a hero here or a zero.
Maybe I should've read a little on ADV Rider
before I got this.
Here's the difference that I'm seeing.
Is right here, this one is,
there's like it comes up where this one's flat.
I thought the seal is gonna be the cat's meow.
Dan, it hurts my soul.
Dang it, dang it, dang it.
It is, it's in the bend of the seat.
We'll have to come back to that.
Yeah, that one falls right on.
Here we go.
Looks very blue at the moment.
Looks like a blueberry.
Might look like a huckleberry.
Maybe, isn't, aren't they purple?
Oh.
It's awful blue.
All right, but it is now geared up for off-road.
We'll get some decals and stuff on here.
That'll really pop.
I got a super awesome secret coming for the exhaust
that we're gonna play with.
I think the next step is we're gonna get this bike on
a dyno and get some baseline numbers
and then we're gonna take those baseline numbers
and add some power to it.
Where's my box of goodies?
Yeah, so in the next video of this bike,
we're gonna, we'll get some baseline numbers
and then we'll throw on the, what do we got here?
Power Vision 3 from Dynojet.
Pretty saucy.
I gotta read up a little on this,
but we got a tune in here that the guys at Dynojet
have been playing around with.
I think you have two options.
I think this can either stay with the bike,
you can mount it somewhere, wherever,
and you can keep it with the bike,
or I believe you can put the tune in
and then take this back off the bike.
If that's the case, I'm not sure exactly
what I'm gonna do yet.
If I leave it on the bike, I'm gonna have to get a T
for the ECM, ECU plug,
because this is gonna plug into there
and that's where I plug the ABS dongle into.
So I'm gonna have to look into that.
But the next video, we're gonna start addressing
these power mods.
Like I said, we're going to go to the dyno,
we're gonna get baseline numbers,
we're gonna throw this on, play around with that,
get some numbers off of that,
and then I got a secret thing, not secret,
but I got something pretty cool I'm gonna try to do here.
And then maybe we can get some numbers
with all of that stuff put together
to see how much power we can get out of this thing.
Couple other mods I gotta do yet,
or that are coming.
Brake pedal, I have a brake pedal coming,
so we're gonna do the brake lever mod.
Yeah, I got some front fender stuff coming.
Man, skid plate, that's gonna be exciting.
I don't know, we got a lot of fun stuff
planned yet for this bike.
Oh, suspension.
At some point here, we gotta rip the suspension out too,
so we can get that dialed and stiffened up
and reworked and stuff,
so we have a better ride for off-road.
All that stuff is coming down the road.
I think we did about what we can do here at the moment.
And the snow hasn't even melted yet,
hasn't even been above freezing.
It's a real blizzard out there, it's a real tundra.
Okay, we still have a lot of work to do on this bike
and we're gonna be running out of time
before I gotta have it out in Utah.
So, we know the next steps.
I'm gonna call this one here.
You guys, find something to start working on,
start learning, start wrenching, start having fun.
Pull that bike out of the garage or the shed or the barn,
your neighbor's barn, it doesn't matter.
Start wrenching, learning something and having fun.
Have a great weekend.
We'll see you next week.
