Italjet Dragster 300 Full Malossi Build 🔥 Akrapovic | I-Tech | Force Master 2.1 #Malossi #ItalJet

How's everyone doing Welcome back Today we're building an Italjet 300 Dragster with a full Mellossi kit We're including the PowerCam Cylinder Kit Air Filter and full Drive System Force Master gearbox down Everything possible is being done This is going to be an epic build I mean isn't this part just the next level up Let's do a quick test run while the bike is stock 0 to 60 in just 5.3 seconds stock 0 to 100 in 11.2 seconds Let's start removing the engine Engine out onto the table Let's start installing the Mellossi parts And boom PowerCam and cylinder are in place Damn this looks great Let's remove the gearbox And let's put the engine back in Air filter on I mean that's a serious air filter—Mellossi Force Master 2.1 installed And let's begin with the final drive—start stripping it down and fit it by removing the clutch from the torque driver Removing the locking plate and pins Removing the original torque driver and cleaning everything thoroughly with some brake cleaner Time to assemble the Mellossi torque driver fitted the new o-rings included in the kit and they also provided some excellent Mellossi grease Be sure to generously lubricate all parts for peak performance and protection Now we'll install the Mellossi spring included with the Multivar 2000 torsion controller followed by the fully adjustable delta clutch Time to assemble the Multivar 2000 Make sure you clean everything thoroughly with brake cleaner since it has a coating were using 14- and 16-gram rollers Make sure to have the right one your left so it doesn't come off I always apply a small amount of grease to the bushing A little b Proper lubrication goes a long way With everything assembled let's get it back onto the bike We'll be running the Mellossi XK belt Just look at that clutch bell—it also helps with some things cooling with the cooling fins Time to put the CVT cover back It's a pity we can't show off tha Stunning Mellossi components Fully equipped with an Akrapović exhaust This one’s going to sound fierce Must be one of the most stylish scooters out there and obviously we had to include some Mellossi elements Valve caps Mellossi Force Master underneath the seat Let's fire it up Time to take it for a ride 0 to 60 in 5.2 seconds 0 to 100 in 8.2 seconds—what a machine There's still plenty of tuning left in this bike This is a rocket Thanks for watching Don't forget to like and subscribe Let me know in the comments below what you'd like to see next Cheers