UV BUTTON Why every bowhunter needs this

Exploring Ancient Crossbows
3 followers
13 Video Views·Feb 6, 2026
UV BUTTON Why every bowhunter needs this
Comments are disabled for this video.
Ladies and gentlemen, this is the, hopefully the video you've been waiting for,
the all new thumb release from Alchemy Archery. We have, we have them in hand. If you have
notifications on the channel, you saw that the launch film dropped yesterday, but today
is going to be a deep dive into the thumb button. Everything that you could possibly know about it,
hopefully we'll cover in this video, inside this box. This is how, this is how they ship it. This
is how you would get it. We got two releases in here. Um, so let's dive on in and open them up.
Sad day, by the way, I broke off the tip of my, uh, my knife yesterday. I dropped it and it broke.
So real sad day. We'll start, we'll start with whatever the one, this is, whatever this is,
we'll rock. Oh, there it is. Colby wrote it on me. Nice, nice and nice and neatly. This is
the stainless steel button. It is, uh, the same, about the same weight properties as the brass
releases. So if you like a heavier release, this is going to be the one for you. And then obviously
we have the aluminum version, but this is how it's going to come. It's going to be very similar
to the hinge to boxing. You got an Allen wrench for adjustments underneath the, uh, the foam
packaging is going to be an all new, uh, little pamphlet here going over. Oh, I guess this is,
I don't know if this is how they're a hundred percent done. They are not, this is still raw
prototype manual. Colby just printed it out for me, I guess on a single sheet of paper. If you
get one now, it's in a nice little booklet, which is really nice, but we have a manual going over
everything, all of the adjustments of the wise, everything. And of course, good old handy warning
labels. So make sure you don't make sure you don't do anything that those warning labels say
or anything that I do don't do anything I do. So yes, we have been working on this for a very long
time. We've had so many questions, you know, ever since we came out with the original hinge one,
they're like, when is a button release going to come out? Like when? And we were like soon,
you know, sometime we're working on it. And for UltraView, we never try to come out with a product
that's like half baked. We want our best effort, our best foot forward. And we've been working on
this for quite a long time. And the hinge two was the step in the right direction because I'll pull
out the fancy prototype one. The hinge two and the new UV button is the same exact form factor,
the same head location. Your draw length is going to feel the same. It's going to feel the same in
your hand. They are supposed to be as one can shoot them both going to feel exactly the same.
And we came out with this with hopes and plans to come out with this. And now it's finally here.
So we're going to dive into each setting one by one and unravel the new UV button. Okay,
so first, like when you pick this thing up, you're going to notice the thumb barrel,
this is going to be the stock thumb barrel that comes with it. You know, thumb barrels are kind
of underrated because some are just standard. They have the knurling around it, but we wanted
to have it with purpose. So we actually have these very deep grooves that are going to cut
into your finger. They're going to really grab in your finger. They're not sharp, but it feels like
it's actually grabbing your thumb because of the way that it corkscrews, it resists against your
thumb. It's not going to slip against it. It actually is going to help you execute a good
shot. You're going to feel good feedback and good pressure from it. So these come in a lot of
different colors too. This is just standard and stock black, how it comes. The adjustment thumb
barrels, you know, and other releases and stuff, I've had them shift all around on me. So that was
one thing I was like, guys, we have to make sure that this thumb barrel does not move once it's
tightened down. And I think they really tackled it because we've, we've loved it so far. So you
come in here, it's just one Allen wrench, you loosen it, and then you have a free floating
thumb knob position anyway like this. And then you have up and down. Now, instead of just an
Allen wrench tightening down on a bolt behind it, we actually have connection point there,
connection point here with very deep threads on this side. So you can tighten this bad boy down
pretty much. And since it has compression on both sides, unless you break something in half,
your thumb barrel should not move. So I really love that lot of customizability from that too.
On top of that, if you want even more adjustability, if you come on this backside,
the thumb barrel knob actually loosens too. You can loosen that and you can get more
adjustability and travel because it actually oscillates in there. It's not a center drill
hold. We did that on purpose so that you can even get more customizability, more travel,
and exactly how you want it. Because everyone's thumb is a little bit different, how they,
how they hold it is a little bit different. So you should be able to find a good feel for you.
On the back part, we have the, the cocking trigger mechanism. And this is kind of internal. You're
never really going to see this, but you're going to feel it. You're going to hear it.
There's actually very, very little metal on metal contact in the entire internal release.
We, uh, came out with ultra glide technology is what we're calling it. All the bearings,
everything is, is not metal on metal contact. This is a ultimate hunting release, ultimate target
release. And with that, it should be pretty quiet. So we actually have little plastic stops in there
too. So that after the shot, it's much, much quieter than, than a lot of them out on the
market. So that's really cool. It's not super hard to push very, uh, you know, confirming that
it's clicked and it's not going to hang up halfway in between next sense. It is tailored for
the bow hunter. I was like, gosh, we need to have a string retainer. We need some way. So that clips
on the D loop and stays on the D loop. And that's where this little guy comes in. This is the string
retainer clip. So you just need a little bit of pressure to push this into your D loop. Let me
grab a bow. Best way to do it is you hold your release like normal and you just use your thumb
and you just kind of slightly push it in. And then it's on your D loop can stay right on your D loop
and, uh, your whitetail hunting spot and stalking, whatever you can always have it at the ready right
there. Also, once you fire and before you cock, there is a little magnet on the inside that
automatically pushes your hook back into the set position. When you're just shooting like normal,
you will almost never find your hook just out lacks like this, because after you shoot,
it comes back in and locks back down. And all you have to do is push
the cocking mechanism back. So you're pretty much ready to go. Always. If you have to shoot again
real quickly, or you're just, you know, target shooting, practicing, it's really easy. You never
have to swing around, clip it in or anything. All you got to do is push the cocking lever,
push it in the D loop like that. And you're good to go. I've seen people do it with their index
trigger or index finger with their thumb. And sometimes you can even just push it in there
slightly without you and use an extra finger, but it's never going to slip out on you. We made
sure that the diameter between those two were small enough that no D loop is going to slip
in between. Next just outside features. We have a lanyard attachment, this third finger lanyard
attachment. If you have an aftermarket lanyard of any sorts, you can funnel it right through there.
If you just want to, you know, piece of paracord, anything, anything you want,
it has that, my bonus though. We also are going to have a four finger attachments coming out very
soon, but it will ship and it will launch with just the three finger attachment. So going into
the actual travel and adjustments of the release, we want, again, we wanted it to be very customizable,
whatever you want. If you want a super light release, if you want a super heavy release,
if you want no travel, if you want travel, we have all of the options underneath the sun
available for this. So what we are going to do is we're going to set this release up to have
no travel. Pretty much you go to press the, press the button. The only thing you're going to be
doing is resisting against it. There's going to be no travel or movement of the actual button release.
When we were editing this video, we wanted to redo and explain how you should go about setting this
up and how easy it is to do the tension. So when they assemble these, they are set up,
the button is set up to about the average setting. It's ready to go. You can pick it up,
you can shoot it. It's, it's, it's literally ready to go. If you want to change it, step number one
that you have to do, take out your handy dandy Allen wrenches. You are going to take your force
screw and you're going to back it all the way out, all the way out until you can't anymore.
So there we are. That is the back end. So you can still click it. You can still shoot it,
but it is backed all the way out. Now, what you're going to do is you're going to take your
travel screw, which they are marked super nicely right here. We got our force one right here.
We got our travel one right here, plus and minus. You're going to take your travel one and spin it
all the way in until it fires. Boom. There we go. So we're just going to double check that we're
right there. Yep. We are. So now what you're going to do is you're going to back off a quarter turn.
So we're just going to spin quarter turn. Now what that does is it sets the release up to be
absolutely no travel. Now, if you want a little bit of travel, you can, and you can keep backing
out a little bit more to allow a little bit of travel, but most people, 90% of people, 95% of
people, you want no travel. Essentially you're putting pressure onto the button release and all
you're, you're not, you're feeling nothing other than just increasing pressure. Now we're set
pretty light. I mean, it's, it's pretty sensitive. So now to get your force correct, what you're
going to do is you're going to add force by turning it clockwise. So I'm just going to do,
I'm going to do about a turn. That is going to be pretty standard where a lot of people
are going to land and that feels pretty good right there. So if you want more force, you keep
spinning it in and we recommend don't really going past three full turns. Three full turns is about
as much as you're going to want. Um, and then obviously all the way out is as light as you're
going to want it. So if we want it as light as we can go, we go all the way out and that's pretty
light. And then if you want more, you just go all the way in. We wanted the maximum amount
of adjustment with this release. Super, super light, but also really hard. If you want it,
it's all in one as adjustable, but make sure you follow those steps. If you want to change it,
step one, take your four screw, go all the way out until you can't anymore. Then screw in your
travel until the fires back out a quarter turn and then adjust your force as you want in that
order. All right, let's go. All right. So next we have the aluminum, um, same form factor,
same release, same everything other than weight. The aluminum is light. If you like a really light
release, I mean it is super, super light. Then the stainless is pretty heavy. Um, so this is
strictly a personal preference. A lot of guys like a much heavier release. They feel like they're
a little more stable, more stability, um, when they're anchoring and a super light release
is just a little easier to use. It's easier to carry. Um, it doesn't weigh down your vinyl
harness or your release pouch or anything like that. So 100% personal preference on this.
So I guess like why UB button, why did we come out with a button? We've, we've came out with the H2
or the H1, then the H2. We've always, UltraView has been known as like the new hinge company.
And now we have the button and they go side by side. I mean, you use a button for everything,
you know, target archery, hunting, recreational. It's really a release that anyone can use.
And when used properly, it also can be used just like a hinge and 100% can be as accurate as a
hinge. Um, but a button, you know, quite frankly, it's a little easier to use and I'm actually
really excited to dive into this hunting season with it. Um, just for the fact of being able to
hang on the D loop and be at the ready at all times to be able to be a little bit more in
control of my shots. And overall, it just feels really good. I mean, in the past I've used buttons,
I've liked buttons and we came out with the H1 and I've been hinge only from now on until now.
So I'm really stoked about this, diving into quite, you know, kind of a hunting product. Like
this is a hunting release and that's what we want it to be. Um, and we're excited. We're stoked.
UltraViewArchery.com. Also BeRealMerch.com. We got them in both places. Um, so make sure to check
them out. The all new UV button. And tomorrow's video, we're going to be diving into how to use
it, why to use it, and we'll get out and shoot it a little bit. But this was strictly an educational
instruction video on it. Make sure to check it out. UltraViewArchery.com and BeRealMerch.com.
