How to Draw Landscapes, The Graphite Powder Technique.

Art painting
22 followers
20 Video Views·Feb 6, 2026
Hi everyone, welcome back. I've got a drawing demonstration for you today.
As you can see I'm scraping some graphite powder on an HB with a brush pencil.
I'm just blending it in with a piece of kitchen towel to get some nice soft misty background effects.
I've drawn in a couple of trees to start with, just to give me an idea of where I want the lights and darks to be with the graphite powder.
Trouble is with doing that though, you will sort of blend them in and lose them a little bit.
As you can see the tree on the right hand side there, I've kind of lost it, but I can still see just some faint pencil marks there,
so I'll be able to put that back in in a little while.
It's going to be sort of a misty forest type scene.
There's got to have some sunbeams and things like that shining through the trees.
I'm using the kneadable eraser now just to pull out some highlights, gaps in the trees and things like that where I want the sun to come shining through.
I'm scrunching the kneadable eraser up at the end to make it into a nice fine point to get some finer detail.
As you can see I've put a boat in the foreground, but I decided to change that at the end.
I actually finished the drawing with the boats in it and everything, and then decided I didn't like it at all,
so I completely erased the boat and the figure and decided to put two backpackers walking along the path instead.
It just made for a nicer composition, I just preferred the look of it a lot better.
I think with the boat being there in the foreground it kind of stops the eye from travelling over onto the path,
so I decided to get rid of it.
As you can see now I've just put some rays of light coming through the tree canopies there.
I'm just using the kneadable eraser.
Be very careful when you do this, don't press down too hard or you'll erase all of the graphite and it'll get through to the white paper and that'll just be too harsh.
But if you do do that you can blend it a little bit with a blending stump and it should be okay.
But the best way of doing that to achieve those rays of light is to just press very gently,
just literally hold the kneadable eraser on the paper and just move it across.
Don't push it across, just gently move it across and you'll just remove the top layer of graphite
and you'll still leave some of the graphite powder in the grain of the paper and you'll get a nice soft effect.
I'm just working on a little bit of foliage there with a 2H pencil.
I'm trying to keep it nice and soft and nice and light.
It's going to be in the distance so I don't want it to be too detailed.
So I'll just draw it in first and I'll soften it a little bit with a blending stump.
I'm just using a little bit of kitchen towel there just to soften up around the base of the foliage there.
Now I'm using the Derwent pencil eraser.
Just touching it on the graphite and it just lifts it off.
Gives nice little spots, little flecks and highlights and things like that.
Now for the trees that are further forward in the picture I'm using an HB pencil.
Pressing just a little bit harder just to achieve a little bit more detail
so I get a better contrast between the foreground and the background.
Those rays of sun coming through the tree canopies look quite overdone at the minute.
They don't look very subtle at all.
But they will be drawn over with more foliage later on in the picture
which should take your eye off a little bit.
But I still want them to show through just a little bit just to create that nice sunlit forest effect.
The main part of the light source is in between the two trees there
and that's where I want most of those sun rays to be.
But just a little bit in the background will look nice just at the back of the foliage there.
Just to add a bit of space between the foreground trees and the distant trees in the background.
Again I'm using an HB pencil for this middle tree.
Just to do the foliage there.
I keep it dark across the top edge again so it will stand out against the tree at the back of it.
I don't want the foliage to all get lost or merge together.
You actually want to see the definition between the two trees.
I'm using a 2H pencil just to lightly draw in some distant tree trunks
and then I'll go in and soften them with a blending stump.
Again I don't want them to stand out too much
because they are set at the back of these foreground trees.
I keep them just a little bit lighter and a little bit softer.
It should look OK.
Working a little bit on the foreground now.
You'll probably notice that I jump around the whole picture.
I don't stick to one area like the background and completely finish it and then work on the foreground.
I don't seem to work conventionally in that way at all.
The reason is I'm kind of judging the relationship between the elements of the picture as I'm drawing it.
What I mean by that is when I'm drawing the foreground
I'm looking at the background as I'm drawing it and I'm thinking
what effect is this having on the background?
Is it making the foreground stand out too much and the background drop further back and vice versa?
When I'm drawing the background I'm looking at the foreground thinking
is this clashing with the foreground?
Am I bringing the background too far forward?
Sometimes I am and that's why I jump from one to the other
because I go from one to the other to correct it.
Like now I'm drawing in some tree trunks there just behind the sun rays.
I've just jumped from the foreground to doing that because I thought
the foreground was looking too much and it needed a little bit more in the background
because the background just looked too lost
with such a strong contrast in the foreground.
So that's why I keep going from one to the other and jumping around the picture a little bit.
It's okay if you want to work in a more conventional way
by drawing the background in first and then drawing the foreground
or if you want to work in little sections and work your way along the picture
that's fine, it's probably safer to do that.
This is just the way I do things.
We're all different so you find your own way, your own methods.
So you do what you get your best results with.
This foreground tree I'm adding a little bit more detail,
a little bit more texture on the trunk, more bark, a little bit more shadow on there
so we get a nice receding effect as it goes off into the depth of the forest.
I only actually used two grays of pencil for the whole of the background,
pretty much most of the foreground actually and that was just a 2H and an HB.
I did actually use a 2B pencil when I put the figure in with the boat
but apart from that the majority of it is just a 2H and an HB
and obviously varying pressure to get the various degrees of tone there.
Again I'm just using the HB pencil to draw in the foliage on the foreground tree.
I'm leaving bigger gaps and bigger sky holes and things like that.
More detail, more defined because it's further forward in the picture.
But I will soften some areas off if they look too harsh
and use the eraser as well to add a few highlights.
As you can see those sun rays are getting almost lost now.
But they're still just there, just very subtly just in the background.
So you'll have to let me know in the comments section
if you prefer the picture with the boat in it
or afterwards when I decide to add the two backpackers and erase the boat.
I suppose everybody's taste is going to differ but it will be interesting to know.
I'm just using the kneaded eraser now to put a few highlights in the middle distance.
I don't want to add too much detail there.
I certainly don't want it to clash with the foreground tree
but I don't want it to get lost completely in the background.
So just a little bit of subtle detail like those highlights
can just bring it a little bit forward and add a little bit more interest.
Of course blending and softening all the time.
As you can see I'm actually using the paper blending stick
that I actually draw with to get some nice soft marks in the foreground grass.
I'm going in with the HP pencil and just defining it just a little bit more.
Softening off again.
It's all part of my technique really.
It's more or less a three part technique which I use for all my drawings.
It's basically just put some graphite down, blend it in and then erase some highlights.
And that's it.
I mean, you know, just doing those three things
and you can create these ugly effects with graphite.
I'm using a 2H pencil now.
Just sort of going in and out of the foliage there
just to try and create the illusion of a few more tree trunks.
Just slightly more forward in the distant forest but not quite as far forward
as the foliage there in the middle distance.
Just helping to link the background to the middle ground just a little bit.
I'm using the Tombow Mono eraser now.
It's a very fine tip eraser.
It's 2.3mm tip on it.
Very fine.
And I use that just for little tiny highlights
and fine detail just here and there.
And now I'm using the 2H pencil
just to shade in around the back of the highlights
just so the highlights stand out just a little bit more.
Because obviously if you want something to look lighter
a good trick to do is to make the surrounding area darker
and the lighter areas will look a lot lighter than they were before.
But in this case I don't want anything to stand out too much
because it is more in the background.
So it's trying to get that balance really
between all the different planes in the drawing
you know foregrounds and backgrounds and middle distance
and all that kind of stuff.
Once you've mastered that
you'll really start to get some nice results.
And it's all to do with aerial perspective.
And that's achieved by using these techniques
like softening backgrounds off
and making foregrounds darker and sharper
and things like that.
So I've had a lot of comments from beginners
saying that they've tried this graphite technique
they were just a bit of loose heads with the drawing
and they thought they'd give this
you know they saw my video and thought they'd give this a try.
And they've been getting some good results
so it's really pleased to hear your comments.
Some of you have even sent me some of your drawings
you know on Facebook and things like that.
You're doing some fantastic work
and it's really good to see that you're getting to grips
with this graphite powder method
because it's a great place to start
for beginners and intermediates and professionals as well.
It's just a lovely method to use all round really.
Now there's just a few simple things to follow
like I say just keep the distances in the background nice and soft
and keep it nice and sharp in the foreground
you know just to start with
and then you'll soon develop the other areas
the subtle areas in the mid distance and things like that.
As you can see I've started to work on the boat now
and the figure and this is where it kind of goes wrong.
It doesn't look too bad but
for some reason I just didn't like it.
I think it blocked the eye from going over to the path too much.
It seemed more of an obstacle than a feature
so that's why I decided to erase it.
So you can skip this bit if you want
because it's not going to be seen in the final picture.
I'm at the stage now where I'm just kind of
faffing around
and just trying to refine it
and add a little bit more detail here and there
and just touch up some of the reflections
and try and improve that figure on the boat.
It's just sort of at the polishing stages now.
So I think the only time I used a too big pencil there was
to get some of the darker areas under that boat.
Now I'm using the HB pencil just to put in the reflections of the tree.
Once I'd erased the boat
one of the ideas I had was to do a really detailed
foreground water.
Lots of nice reflections and things like that
but I decided just to keep it simple
so that the eye travelled across it.
Because like I say putting that boat there
I thought was just too much detail in that area so
I decided just to leave the water fairly simple
after I'd erased the boat.
So that's the final drawing with the boat
and the next frame you'll see is the finished drawing
once I've added two backpackers and erased the boat.
So just let me know what you think.
So there you go.
Hope that was helpful to you.
Thanks very much for viewing
and I'll see you next time.
Bye for now.
