Sorting Out Two Troublesome Coelogyne Orchids

Green Happiness
146 followers
Hi this is Roger, thanks for dropping by. Working video. Now I'm running late,
we've had a mishap. I was watering everything this morning except the cymbidiums
and cleonies out here anyway, which is a lot and I was quite tired and I thought I'll
get myself a drink and sit down and watch the news and fell sound asleep. I haven't long woken up
and realised that the time is getting late. It will be getting dark in the not too distant future.
Now I'm going to try and do two videos in the next hour. So we need to stop all this rabbit
and get on with the work. So I'll swing the camera around and let you know what I'm up to.
Right as you can see in the background I've got two celogenies here. They were identified as
troublesome in the last celogeny update that I did, which you can backtrack and find if you like.
So that's what this video is going to be about. And this video, all about this relatively new
dendrobium that I got, which is cassiopea, is going to be the one for the members only. That
will be the members only video. I'm not going to say what I'm going to do to it, but we're not
setting fire to it or anything, don't worry. So that one goes to one side, that's not part of
this video. But these are. So as always we get things out of the pots and we don't muddle up the
tags. Let me just have a good look. Right now this is celogeny Laurenciana and it's hanging over the
pot and the back end of the plant has got stacks of room where there will never be any growth. So
it's a total waste of time. So hopefully this is going to come out of the pot reasonably easy.
He says. And there again it might not. It's a pretty solid mess of media and roots.
Come on. He is in there. I've got a reasonable amount coming through the bottom but I wouldn't
thought it was enough to hold it in place. I believe it. Actually I'm just, I'm going to go
and get a blade and go around the edge on this round. I'm only going to go around with the blade
around the back end of the plant simply because that's where most of the old roots are which I
probably won't keep anyway. Let's see if that's loosened it up. Not really. And a bit nearer to
the front then. I've got a horrible feeling that was a crack in the pot which is a shame because
I want to reuse it. This is just because it's a, it's not really stuck to the pot. It's because
it's a such a massive roots. That's got it now. It's coming. There we go. Right. Yeah this is,
this is just solid and I want to break that up a bit. That's not the reason for
repotting it. Now this hasn't long been potted so there's nothing wrong with the media it's in.
It's not, I don't need to replace it. It can stay but the idea is to get
the back end of the plant off which I will do now.
Go in there. This is better than going to the gym. It's damn so cheaper as well.
Now I'm going to go through there. The rest of the back end of that plant off. It would have been
better if I'd got a sharp knife wouldn't it. So that's the back end of the plant gone which was
the objective. I'm not going to go much more than that. The objective is to get these new growths
into some media. Now the roots we've already got are okay. I'm just going to tease a bit of the
media out so that any new branches on these roots actually go into some media.
I don't like that solid mass there either.
I'm going to remove that. This is old roots down here. This is the bottom of the plant effectively.
I'll take these off. I think we're into scissor territory now.
We've gone past the brute force territory and we're now into
snipping. You might think this is a bit brutal but where I'm hacking around and poking and pushing
is not where the new roots are. New roots are up here and around here. There are a few down in this
area. So that's what's coming off of that one. No I'm not going to plant the old bulbs. Right so
that's that one. It's going back in the same pot so I shall plonk it in there out of the way.
Put the tag in there and we'll move on to the next one. This has got the same problem apart
from the fact it hasn't got the massive set of roots and will come straight out of the pot.
Trust me. There we go and how I knew that was this one was potted on so all of that
bark around the outside is new. Right now the reason for doing this is the same reason.
We have new growths that were above the media
and I want new roots to go in the media not in the air. So I'm going to move the sheath,
remove the sheaths. That exposes the base. I'm going to do something a bit different with this one
to normal. I'll explain why when we get there. See this new growth here the roots have already
started to push upwards. There's a lot of new growths going on here, here, got to another one
here. All these have you know will be growing new roots. If those new roots can get straight into
media and not into air we will get a flipping good root system by the end of the growing season
and that's what cellogenies need because they can dehydrate quite badly. There's another one
Sometimes the sheaths just pull off and other times they just won't move. They're so solid
but we're getting there. See these have become really woody,
they're really hard and woody and roots won't push through those.
Now in the native environment in the wild they would have a lot more moisture on them
but like I've said before that moisture is clean. Clean rainwater and they've got the airflow,
the air movement, they've got everything going for them and those woody bits don't become woody
so much in the wild because they've got more moisture around them. They stay damp and
consequently the roots can push through them. Right I'm happy with that, not interested in
messing with the roots too much. As you can see we've got a hollow here,
that's where the new growths are, that's where the new roots are going to come.
All these are active roots but they're old and then we've got the back end of the plant.
In fact I do believe there's two plants there. I could separate that but then I'd end up with
much smaller plants. I'm going to keep it as a single plant and I'm not going to take the back
end off because it will fall apart. I will leave those bolts on there for support but what I will
do is take this mass of old roots off around the back end of the plant. They serve no purpose.
If they were active roots I'd leave them but they're not, they're just old. That'll do.
Right so that's that one, that goes back in its pot, back in there and keep the label.
Right I'm going to chuck this, this goes in my bag. I keep a bag basically for rubbish,
dead leaves, all that sort of stuff. During my watering session today we lost two plants
and one of them I'm really upset about because it was my apple blossom.
That was one of the original apple blossoms with a very good fragrance and everything and the
lovely tinges of colour. A lot of the new clones have washed out and they've lost their fragrance
but basically the only new cane I had just rotted, just keeled over so there is no plant,
no point in trying to keep it. So that was that and the other one was an obsidian I got
that looked nice when I got it in bloom, never bloomed since and it's never grown
properly ever since. So I got rid of that as well and that was Obsidian Barocco I think it was
called. Right I'll break off there, go and get my media and we'll get these sorted out. I'll be back.
Okay suddenly dawned on me that I'm having a spaghetti tonight. One of those that I cooked
in the last cooking videos so that'll come out the freezer and get thawed out in the microwave
and heated up. When I have a spaghetti I like to have Chianti and I thought we need to do a
quality assurance, we need to check that the bottle's okay so I poured a bit out. That's my
excuse and I'm sticking to it. Right we will do this one first. This is the one that didn't want
to come out of the pot. It's going back in the same pot I know it doesn't look clean but it was
all clean and sterilized when the plant went in there and nothing else has been in there so it's
okay. So I'll get some bark in the bottom, this is my medium bark that gives us a basis to work on.
Now don't forget the principle of what we're doing here is to get this in the media so
that's too much. Just need a bit. No we're going to have to take the bottom of the
plant off. Where can I put that? I'll pull it up here, I'll hoover up in a minute
because if I don't take part of the plant off we're not going to get it low enough in the pot
so I'm just snipping the bottom off. We'll take it off.
Tougher than I thought. That's got it. Right now where was I? So I want this at the back of the pot
all the growth is here and that's where it's going to expand. Sorry all the growth is here
and that's where it's going to expand and I need that in media so that's about the depth I want
for this part of the plant which means the back end of the plant is going to get buried
and it doesn't matter because I'm using large bark and I won't bring it up to the top of the pot
I'll just bring it up to the base of the pseudo bulbs. So that's the back of the pot done.
There's no growing going on there the growing is going on here so we will put some large bark in
which will be in the bottom of the pot then we will switch to the smaller bark
we will bring this up quite a way so this is now going all over the roots that we've got
but the roots I'm interested are the ones that haven't grown yet that are going to come out of
these new growths around the front of the plant that's the bit that's important and I want those
roots to go straight into media so they're going to get my smallest bark just around the base
whoops of the pseudo bulbs I hope that bag landed the right way up yes it did
so this is my um sort of seedling mix which is very small bark there's some perlite and some
bits of moss in there from where I've mixed up other things now all of that's gone around the
base of the new growths which is exactly where the new roots will come out it's only a thin layer
those roots will go straight down through that and into the larger bark yeah but this smaller
bark near the surface will stay moist a lot longer than the other bark and it will encourage those
roots to get down into the pot but there's not enough of it to stay really really wet and start
thinking about rotting the um rotting the pseudo bulbs so that's that one done and we will put the
tag back in the back of the pot stick that back in there I will water that in a minute
get that out the way time's getting on right quality assurance now let's do this one
and it's sort of the same principle this big pot will come out of the black pot thank you
right so we need some chunky stuff in the bottom got far less roots to worry about this time
and it's the front of the plant where all these new growths have got to go
in the media so the plant's going to have to go about there no it needs to go deeper
get some out needs to go right down so that all of those growths are sitting on the media
and then like before we put the big bark around the back now this time there is some actual
active roots around the back so I will make sure this bark does get down in amongst the roots
so that they're at least touching something and then just bring it up to the level of the base
of the pseudo bulbs but no so what we're effectively doing is filling half the pot
with one type of media and the other half with a different type right so that's the big chunky
stuff around the back of the plant now we've got active roots here so this media needs to get down
into those they're not quite so random this time you need to actively deal with those roots down
in the bottom of the pot and make sure they're in media but again I'm only going to bring this
media up so far I'm going to stop that's about right and then as before we will get the very
fine media which will sit around the base of the plant where the new roots are going to come out
and encourage them to get down into the pot these new growths are still quite near the edge of the
pot but there is room for them to develop and grow to their full size in this pot
then next time with the next set of new growths we will need a bigger pot but hopefully this time
round the new roots will get down in some media so we're dealt with all the new growth yes this
is the only one that's a bit high you might have to just suffer that right so that's that done
back in there the tag back in because you might want to know what they are well this is Moriana
Telogenae Moriana and it's the standard species not one of the named versions like
Brockhurst or what's the one I've got Magnifica it's not any of those so
those are our two plants and the other one was Laurenciana if I didn't say
those are the two telogenes hopefully now any new roots that come from the new growths will
get down into that fine media where they won't dehydrate and then they can push on
and get into the bark below which should stay moist a little bit longer because of the fine
bark on top it won't evaporate so quick so that should get us a decent root system going
reasonably well okay so that's that one I've got another video to do now which is for the members
only so I will switch over to that and as far as this one's concerned thanks for dropping by and
perhaps you could think about becoming a member of the YouTube channel or joining me on the
Patreon site and become a member over there and then you can watch the next video that I'm just
about to do anyway thanks for your company thanks for dropping by don't forget the old thumbs up
and leave us a comment if you feel like doing so see you next time bye for now
