Architectural Modeling in Blender – Part 2 | Doors, Windows & Detailing

Decor Design 3D
20 followers
Feb 4, 2026
Welcome to the second part of this series. In this part, we'll be adding the windows and doors.
And oh, before I forget, let me correct something from the first part.
So the last time, the dimensions we have here, here you are. So it's supposed to be 0.4,
but I only use 0.2, which is just this one here at 0.2. So what I would have done
to correct it, I just have to manually do it like this. And then I'll just, you know,
I have to fill in a face, I have to fill in a face. Voila. So there you go. That was one.
Another is this one from the reference. We could see that, can you see this slight indentation
like there's still, let's see, I think the pictures might show us better. Yeah, can you see?
I think there's something, yeah, there's just, it's hard, there's something around there.
So what I did was that I will apply the solidify modifier, make sure you're in object mode.
So I will apply the solidify modifier. And then let's just hide the modifier for now.
So while it is selected, I'll go to face, edit mode, pixelation mode. And the dimension they
gave us, this is 0.2, right? And that's 0.02. So I'm just going to press I to insert, insert.
And then E to extrude and 0.02. Then this, let's see. Yep, 0.02. So I can go back to
my object mode and then turn on the modifier. And then I'll make sure my Z is one. Voila.
And then another thing to check out is this yellow stuff to the front of the house. Okay.
So to fix that, or should we do the window first before fixing it? Well, let's just fix that now.
I'll select the main wall, go to edit mode, add in a loop cut. And from the PDF, the distance
for it is 0.05. Okay. So I'll be adding another loop cuts and then slide it there, GX, or that
0.05. Okay. So this is it. So I'll select this. Okay. Oh, let me just add in a loop cut,
then just snap it there. So I'll select this face, shift it to duplicate,
piece separate by selection. Now select the main wall, go to edit mode. I don't want this,
I'm taking it out. And I don't want any of these two, I'm taking it out. So back to,
that's our duplication. Okay. So I'll select it, turn on solidify modifier. The thickness I gave
to us is 0.1. Yeah, 0.1. So solidify modifier, and then I'll just make it 0.1. But we can see
that it is, the thickness is going inside. As usual, you can select everything. Let me just
show you. Let's turn on face orientation and turn it off. You can see, it's facing inside.
The red is facing inside. So can go to edit mode and flip it. So let's continue with this. And
then let's add in the array modifier. This time around, we are going to do Y. So X is going to be
zero, and Y is going to be one, or rather, negative one. But we can see that the distance
that I gave to us from the PDF documents, the distance is 0.05. So we cannot really tell the
amount of bricks that are there. But from this picture, you can count 1, 2, 3, 4, 5, 6, 7, 8,
9, 10, 11. If you want to be meticulous about that, you can use 11. I'm just going to go with
the flow. I have to just move it a tad outside. Voila. So after this, I'm going to put the
solidify modifier under the array modifier, because I always tell you guys that modifiers
have a hierarchy, okay? Though sometimes when you apply a modifier first before, like if the
solidify is here, right, and I apply the array modifier, you see, it gives a warning. Though
it might not cause any problem though, but sometimes it might cause you problems. So let's
just go back. I want to apply the array modifier. So let me just put it up first, and then apply
the array modifier. Now I can go to, no, I can go to edit mode, turn off the solidify modifier.
Now I'm going to, I'm in face selection mode. So now I'm going to select faces like this.
So X, delete faces. Back to object mode. Now enable solidify modifier. Nice. Okay, so let's
add in the windows and doors. For the windows and doors, we're going to use a free plugin that
comes with Blender, the Archimage add-on. So if you don't have it enabled, you can go to edit,
preferences, add-ons, and search for Archimage, and make sure this checkbox is clicked to enable
it, okay? So that's, press your N if it's not enabled, your N panel, which is the side panel,
and then go to items. Please make sure you're in object mode, okay? And then you go to create,
you see Archimage. So we're not going to be using the door function, or rather the door,
because from our preference, you can see that the front door is a sliding door. So for this
sliding door, we're going to be using, instead of the door from the Archimage, we'll be using the
rail window, because it gives us the look and feel of the sliding doors, okay? And that thing
you should take note of is, when you click on any of all this stuff from the Archimage,
it pops up wherever your cursor is. So make sure your cursor is close to your work,
so that you'll not be zooming out, so be looking for wherever your mesh pop up in.
Another thing you can do, you can click on the cursor too, and then select any place
you want the mesh to pop up from, okay? Or you can just reset your third cursor with shift C,
you can press shift S, cursor to world origin, same thing, okay? So let's proceed with the door.
So for this one, I'm going to be adding the rail windows, and you see, it's here. I want to be
seeing mesh when it comes out, okay? So I'm going to snap my cursor, oh, so I'm going to snap my
cursor to this particular point, okay? So that whenever I add the rail windows or the door,
it's going to pop up in this place, okay? Then I can do my adjustments. Oh, another thing,
I like arranging my scene. So inside this building collection, I'm going to create a new
folder, and I will call it windows, that's called doors, you know, I'll just put W underscore D,
so windows and doors, okay? So I'll make sure it's selected, and then I'm going to click on
the rail window, and oh, for the ArchiMesh add-on, under display int, I'm going to click on show,
so it will show the measurements, okay? From our documents, the front door is 2.2,
and then the height is also 2.2, okay? So we're going to do that. We don't want the seal,
let's see, oh, I should explain something. So for the ArchiMesh add-on, if you click on any
other parts of the add-on, you won't be getting the properties to edit the height or the width
of the windows, okay? So to be able to edit that, you need to click on the frame of the window,
same thing for the doors. So when we go to the doors, you'll see that. So you need to click on
the frame. So when you click on the frame, you will see that these options to edit the width
and the height and the depth are going to pop up, okay? Another thing I've noticed is that
when I'm in Eevee and I import this window, the materials, because under here it says
create default cycles materials, okay? So the glass material is not being created.
So to be able to make sure that it's created, like it's added automatically,
only to be in cycles, so we have to delete this guy again, and then let's add in the real windows.
Are you seeing the difference? So now this blue-ish something here, it shows that
it is a glass, okay? So let's edit the windows door, or using it for the door, okay? So you
click on the frame, and then the height, I set it to be 2.2, and then the width to be 2.2 as well.
So there you go. I don't want the seal. This seal is this one here. I don't want it.
When you have done that, to be able to move our window to where we have the front door,
we'll click on this empty over here. Now, when we add in the real window,
it comes in a group like this, and this group, everything, the window, the frame, and everything
is parented to this empty that you're seeing here. So if we want to move this window,
we have to make sure we're clicking on the empty to be able to move across, okay?
And then another thing, again, if you look, we see we have another box called the Control-O,
which is this box surrounding the window, and then we have the window frame. If you open it,
and if you expand it, you'll see we have left and right, okay? That was created for us. I'm just
showing you all that, okay? So move the window. I'll click on the empty. Let me turn on my
wireframe overlays, so I'll see what I'm going to. So I'll click on the empty, G, Z, and then
I'll just snap it down there, and I need to rotate the door, okay? So I'll click on the frame,
and then under rotation, I'll type 90. So click on the empty again, and then 7 to go to top
orthographic view, and then I'll go to my wireframe view by pressing Shift-Z to tap in
out of wireframe view, or you can just hold down Z, and then you can go to solid or wireframe,
as the case may be. So here you are. I'm going to move it to put it somewhere around here. You
can see that it does not match with, let me just show you, it does not match with our reference,
because remember that from the document, this part is saying 2.2, but what we have from the
digital floor plan, it says 2.4, okay? I think to me, I feel the 2.4 is an allocation for
maybe the frame of the doors, okay? So let's just switch back, I have to move it outside, okay?
So I'll click on the panel, and then let's just add the unit of width, so 2.4, okay? Cool. So
select the empty, back to top orthographic view, and then let's see, now it fits perfectly. So
click on the walls, and then enable the thickness, aha. So now select the empty,
top orthographic view, and let's just put the door, just eyeball it, nice. So now to cut it
all through the mesh, so that we can see what we've positioned, we need to add in the boolean
modifier. So I'm going to show you a nice trick, because if we want to cut holes for every
windows and doors around the house, it means that we're going to keep adding boolean modifier for
each and every hole we're going to be cutting, okay? So there's a way to solve that problem,
which is, I will click on the main walls, and I'm going to add in the boolean modifier, okay? Now
from my outliner, I'll click on the buildings, and then I'm going to add a new collection,
and I'll name the collection cutters, okay? I can right click, and then just give it any color of
my choice, so that's just for organization's sake. While the main wall is selected, the boolean
modifier, okay? So I will switch my operand type to collection, okay? Are you with me? And then
the control hole of the door, of the rear window, remember this? This control hole, okay?
This particular one. I'm going to press select it, and then I'll press M, which is to move,
and then I'll move it to the cutters collection, okay? Now I'll select the wall, and then I'll
target that cutters collection. Voila! You see? Boolean. Do you understand? Yes, you do.
So let's proceed to the front window, okay? So for the front window, the dimensions we have,
C, beta, and then the height is 60, sorry, 1.6. Go to my end panel, and I'll make sure that I'm
in my windows and doors collection, and not in the cutters collection, okay? Now, select the
windows and doors. Maybe I will just give it another color, so that I'll know that, okay,
windows and doors, and then I'll click on the rear window, you see? And then disable the seal,
don't want the seal. We have the height to be 1.6, and then the width to be just 1. And this
time around, we don't want the sliding windows, a single leaf, okay? And now this external frame,
let's turn it off. And then rotation, let's do, yeah, 90 works, okay? So if we select the empty,
and then snap it, I'm trying to snap there, and then I'm going to move it this way.
From our documentation, the as plan, from this place up, right, is 0.6. So I'm going to press GZ
0.6, and if you check it, you see, it's matched perfectly with the doors. And then let's just
position, you see? Same thing we have here, okay? One thing you should take note of, that this
control object should be able to cut, like you should be able to see it cut through the wall.
If not, your boolean operation is not going to work, okay? So I want to explain something.
If I'm to open the windows, let me drag it out. So I feel there's something wrong with the
Archimesh plugin, because when I enable the external frames, okay, and then the seal,
this seal means that this is supposed to be inside of the building, and then this external
frame is just, okay, let me switch to 2.7c, okay? So it means that, let me select 2.7c,
it means that it's supposed to be something around like this, okay? But you cannot have the
handles of your windows outside your house, right? It does not make sense, right? So
what we're going to do then, I'm just going to turn off external frames, turn off the seal,
turn off the handles, and then let's just put it in, okay? So now I can 7, and then let's just
adjust it somewhere there. I see that the control will need to be visible in both sides. If it's
not visible, you can select it and just move it a bit, or you can go to edit mode and just
scale it out some more, okay? So now for the control object, remember, select it,
press M to move, and then move it to the corners, okay? So I'm going to speed through
adding the windows all around the house, okay? Oh, before I do that, I want to explain
something for you. So I think in Blender 4.2 and above, you double-click on object like this,
it's going to select everything within that collection, okay? Let's see. You see? Or if
it does not, maybe if you're using an older version of Blender, you can just select it once,
right-click, and do select hierarchy. It's the same thing, you select everything about
that collection. So at this step, we want to duplicate the windows that we've already added,
like these windows, okay? So let's first shift it to duplicate, right? And then let's move it
around here because we want to put the window for here. And the dimension given, you can see,
0.6 and 1.6, okay? So once again, select the window frame, and if it's not open for your side
panel, and then right is 1.6, the width is 0.6, okay? Nice. One good thing in using this method
like this duplicating is because remember that we've already moved this window, this control,
we've already moved it into this particular folder, but right now it's not here. I will show you
another trick on how to get it, so I'm going to ignore that. So let's proceed with it. So select
the frame, and then this time around, don't want it rotated, so 0, nice. So 7th top orthographic
view, select the empty, and then just reposition it, okay? This is good. So now I'm going to speed
through. Okay, so this time around, we'll be using the panel window and not the real window.
The dimensions we have is 2.2 and 1.6, as usual, count is 3. So for the real window,
I don't like using the seal, and the inner frame, turn into PVC. I don't want any of those,
okay? Shake it out. Okay, we can see that the middle is bigger than the two sides, right?
This is the problem. This is it. So if you make the values the same, you see, everything will be
equal. So now the only issue I'm having with this panel window is trying to get it to fit
the dimensions accurately. So from here, we have 1.6 and 2.2. So now I have to manually
try and get the values that is going to make this 2.2 and this 1.6, okay?
So let's see, 63, 63. Okay, so 150, 70, 70, 70 works fine for this. So select the empty,
then I'm just, sorry, I'm just going to snap it here. Remember from the ground up is 1, sorry,
0.6. Yep. And then 7 orthographic view, top orthographic view, and then just
leave positions. Don't have to be meticulous about it. So now we can see that from the floor plan
and from the window we have, the window is wider than the floor plan, okay? So
that means we can just tweak the values. Let's drag it out. So let's just tweak the values. Let's do
65, 65, 65, just a bit. We can ignore it instead of trying to tweak the values all the time.
1.6, correct. Back with the doors, correct. And then for the control object,
let's come to the window group, select the control, and then this mode, let's scale it
out so that it's going to be bigger than the thickness of the walls. Nice. Remember to save
your work, guys. And then for this one, same drill. So I'm just going to select this one,
right click, select hierarchy, but you can just double click, okay? Shift it to duplicate,
and then let's snap it around here. Let's move it there, and then let's tweak the height. Let's
move it out a bit, okay? So let's tweak the height. The height is 0.9, ground, and then
this 0.6, the same, you know, dimension with this. So I just bothered about the height, so
select the panels. Let me say panels, okay? So let's just, nice. And then we can first of all
snap it down there. GZ, okay, cool. And then GZ 0.9, it's a photographic view, wireframe view,
and then let's position it around here. Once again, the control object, select its edit mode,
and then scale it out, very necessary. Save your work, guys. And then the window for
the bathroom, it's 1.4 meters from ground. It's just a single one. We can also take the panel
window, or we can just shift S, so to select it, and then let's add an array window. It's right
there. Select the empty, and drag it out, okay? First of all, I want to snap it down. Let's drag
it out so we can see it. So select the frame, turn it to single leaf, procedural, turn off the
external frame, turn off the seal, and turn off the handles. We'll not be seeing that. The
dimension for it is 0.8 by 0.8, so 0.8 by 0.8. Awesome. So from the ground up is GZ 0.4,
okay? So seven, it's a photographic view, and then let's position it, okay? Are there
any windows anywhere? Let's check the plan. Yep, the back. There's still one window in the back,
and then we'll need to add those, okay? So let's add the window for the bathroom, 1.6 meters.
I think we can use this one, 1.6 meters, yeah. So select here, right-click, select hierarchy,
and then I'll just duplicate it and move it to the back. It's a photographic view,
and then just flip position it, and voila. Okay, so next thing to do is the doors, okay?
Once again, I want my cursor to be somewhere there, and then I'm going to add in the door
by clicking on the door now. So for this door, it comes with, let's check it out,
see it? Yeah, door group. It comes with a baseboard, which is useless for us,
but just leave it. The control, and then the door frame. This is a door frame.
The door frame, when you expand it, it has the doors, okay? It has a door, and in the door,
the handles are parented to the door, okay? So for the door, let's go to the item tab.
You can see that the location is locked, and the rotation x-y is locked, leaving only z,
which means that we can only rotate in the z-axis, and the reason why we cannot move it
is because the location is locked, okay? Which means that it's only the parent, which is the
empty, is parent to that we can use to move the objects, but be careful. If you click on the handle
and move it, it's going to move, okay? So just giving you a heads up. So select the empty.
For the door, we have doors one, two, three, four, okay? So let's just start with this one.
So let's look for the dimension for it. I think that should be under cross-section.
Yeah, it's 0.75. Oh, this is for the bathroom. 0.75, yeah, d3 and d2. Oh, yeah, go 0.9 and 2.2, okay?
So for the door, let's get the dimension first. Select the frame. Also create, remember, also
create a key mesh. It's open. You can switch, you know, or you can use both sides if you like, okay?
We've not checked for this part. We'll check the side that is open so that we can tweak the values
accordingly. So, and then we have different handle types. I'll just stick with model one,
and then I'll just leave it in left open for now. So for the width, I'll put 0.9, and for the height,
2.2, okay? So once again, select the empty. Let's go to 7, wireframe, and then let's move it
somewhere around here. Again, select the frame, and we have to rotate it. I think 90 degrees for
now should do. Let's check the floor plan and see if the side is open or not. This is wrong,
which means that our opening should be right open. So let's see. Sorry, select the door.
This is fine. Okay, so I'll select this, and then I'll just snap it down there to put it
just like this. There's no particular way of putting this. I'm just going to use the
thickness of the wall at the handle to just, you know, measure it. Okay, so there you go.
So for the door, we can right click, select hierarchy, and then just duplicate and move
it to the other side. Remember that from the plan, the W theory is different entirely.
The theory is 0.75, okay? So we just need to make sure that we are selecting the frame,
okay? And then 0.75. We see how it looks. Perfect. Okay, we need to switch the
opening type. Select the frame, and then open side is left. Yep. Save your work,
and then we'll have another door here, D2. So we're just going to borrow from this one. So
make sure the control O is passing through. Okay, save your work. So now I want to show you
a nice tip, okay? So you can see that, remember that we have our boolean modifier here and the
collection, the cutter collection. So how are we going to move all the O's, like all the control
O's, the CTRL O's, all the O's to the cutters collection instead of just doing it one after the
other, okay? Well, remember that for this one, when I duplicated, when I selected everything,
right, and I duplicated, because of this one was already inside of the proper collection, right?
When I brought it to this other side, it worked perfectly. But if I tamper with this settings,
right, if I had, say it was a frame, okay, if I tamper with this setting, for example,
I say, the add-on is designed to reset itself, and the control O object will automatically move
away from the cutter folder to this particular folder where it's parent, which is the empty,
this empty is okay. So let's just control Z that for now. So for the tips I want to show you,
I'm going to select, I will select patterns, you see, and oh, before you use this, make sure that
you're not selecting anything. So I'll go to select patterns and under the stars, I was just
and then press star again, and then I'll press enter, you see, all the O's have been selected,
then I'll press M to move, and then voila. Oh, I forgot, this is the inner wall,
and we've not added the solidify modifier, guys. So sorry, the boolean modifier,
boolean, remember operand type collection, and then let's target the cutters collection.
So let's see if it's working. Yeah, it is, okay, nice. So your work, so let's turn off
the measurements. There you go, guys. Okay, so just a quick heads up, right? Remember that I
told you I like organizing my things, so I created a collection for the windows and doors, right?
And then for the cutter collection, okay? And you should be careful that when you check your
cutters collection, that's where only the control objects, and make sure that this collection is not
selected when you're adding in any stuff, because when you do, it's going to cause a problem.
Let's add in a cube, for example. I don't want to add anything from the arcing mesh because I
can see this one didn't take time, but if you add from the arcing mesh collection,
arcing mesh plugin is going to lag, and I don't want that, okay? And then another thing you should
take note of is this collection, right? So if for a venture, maybe you selected the buildings
collection, or maybe the scene collection, okay? And then you add in maybe a door or something,
you'll see that it is not in our windows and doors collection, neither in the cutters,
like the control is not in the cutter, it's just down here. And okay, if you're like,
you want to now move this to this folder, to this collection, and then you just select it,
and then you just move like this, you see? Those meshes that is parented to the empty,
is not going to move. Only the empty is what is going to move. That was why I told you that,
is it that you double click to make sure everything is selected. I think this is from 4.2
and above, right? Or you can just right click, or you can right click and select hierarchy to make
sure you select everything. Same drill, if you want to delete, maybe you added too many,
like this door, I want to delete it because we're already done with adding everything.
And I want to delete this door, for example, how do I do that? I can either double click
to select everything, or right click, and this time, delete hierarchy, okay? So let's add this
furnishing, which is fun, right? I'm just going to furnish maybe a single part of the house,
either the living room, or the bedroom, and then I'll let you do the rest, because the plan gave us,
you know, everything that we need. Another thing you should take note of when furnishing is that
some clients are very specific about how they want their buildings to be furnished, okay? Like for
this one, you can see that we didn't put curtains and all that stuff, right? Some clients are going
to be specific about the kind of curtains, the color of the curtains, the thickness of the
curtains, you know, how they want it to be beautiful and all that stuff, okay? For this,
let's just stick with what we have in this plan, okay? So you can make your furnishings,
if you choose that, but I would advise that, because it's going to take you a while to
achieve that, or you can get individual assets from different websites, okay? We have
fab.com, we have CityTrader, we have TurboSquid, BlendSwap, which is, everything is free in
BlendSwap, and then my all-time favorite, Polygon, right? You can, though they are not free,
there are some free models that you can use, and then this one has a Blender add-on that you can
use to just download stuff directly from Blender, and also there is the Blender kit,
this one too has a plugin, there's a Blender kit, you can get the plugin and install it directly
from Blender and all that stuff. Apart from that, there are other various plugins, if you have the
money, if you have the money to get it, there's like Interiors Essentials, you can get all this
stuff, even from the Blender market, you can, you know, which is not super high, yeah, you can get
all this stuff from there, okay? One downside to assets is the size, like how dense the mesh
can be, okay? Because sometimes the quality, mostly like from the Blender kit, for example,
the mesh can be so dense because they want the resolution to be, rather, they want the mesh to
be very clean and neat, okay? Though, if you know your stuff, after getting a model, you can,
you know, edit it and tweak it a bit to, you know, have it more reduced and more optimized,
because the more dense your mesh is, the more render time it's going to take, and even while
you are working and trying to position things in your 3D viewport, Blender might be lagging
because Blender does not really handle many polygons count like that, and maybe if your
laptop or your computer is not that powerful, surely you'll be lagging, okay? And another thing
is, if you don't have the money, and then you are going to, like, get some of the free assets,
one problem is that sometimes you might not get a commercial license to it, which means that
you cannot use it to make money, okay? And then, oh, I also forgot, there is the, uh-oh, Blender
kit didn't load, there is also Sketchfab, there's Sketchfab, so you can get free assets from this,
okay? But for me, I already have a plugin called Interiors and Centers, you can get it from the
Blender Market, which is now Superhive, yeah, superhivemarket.com, so you can, oh, I logged in,
can't remember my password, whatev, okay? So you can get the Interiors and Centers from
superhivemarket.com, but, you know, you can also search for free stuff from here, okay?
So I'm going to use my plugin to, I'm going to use my plugin to do some
architecture, I'm going to use my plugin to, you know, design the bedroom, and then I will let you,
you know, or let me just do the living room, and then I'll let you look for assets online,
and do yours, okay? So there's my end panel, go to my Interiors and Centers,
and then I'll switch this to living room, this just have remote TV, okay? Let's go to furnitures,
okay, before I'm going to add any furnitures to my scene, under my building collection,
I'm going to create a new folder, add a new collection, and then I will just name it furniture,
okay? You can give it any color of your choice if you want to, so chairs, let's look for sofas,
well speaking of sofas, if you have the money, you can also use, you can also use the
substance, I think my, yep, I think my subscription for substance will soon expire,
and then you can just search for sofas, you can subscribe to this if you have the money to do
that, yeah, so we have different kind of sofas, I have a lot downloaded, you can just download one
from here, the only downside to this is that you have to texture it manually, okay? That's why I
will not recommend this for now, except if you know how to texture, then that's fine, so let's
just use this interior essentials, or you can, you know, search for some city traders, sketchfab,
and all that stuff, so I'm going to, you see, place on third cursor, and this is my cursor is,
so I'll switch to the cursor tool, and then I'll click here, so that my cursor is going to be here,
now I'm going to click on place on third cursor, and then switch back to the move tool, just going
to adjust it around there, I can scale if I want to, if I'm interested in doing that, let's see
how it looks like, this is kind of dense, but it's okay, let's see, yeah, if you want to edit it,
you can do editable, and then you can add in, so let's edit this, and then you can add in
the sofa, so third cursor, and at this time, you can edit it, okay? So if you want to reduce
the mesh and all that stuff, you can do that if you want to, but now I'm going to ignore that,
okay? And then we have different kind of sofas, what do we have next again? I think we have some,
this, let's see, what's it called? I think, chairs, provided armchairs, yep, so let's,
let's add a random one, and then I'm going to, I'm just showing you, you can, you know,
do better than this, and you can see, and you can see this particular one is pretty, pretty dense,
right? Yeah, pretty dense, but we're going to ignore that, I'm just showing you how to do that,
and then this side tables, or is it called a coffee table? I don't know, oh, let's put in
the TV cabinets, let's use this one, and then let's switch the cursor to here, and then let's,
this and third cursor, we have to rotate it the other way around, right? I see, yep,
then we can also put in, let's switch to living room, see it, living room, and then let's put in
a TV, we can put in a TV, GZ, let's switch it to here, so when you're done adding your
furnitures, always make sure to save your work, in fact, when you're adding the furnitures,
always save your work, guys, do not forget to save your work, so another thing you should take
note of is, if I should come here, under statistics, you can see that I have 1.2,
like, in general, everything within my scene is 1.266 million counts, if you have a good laptop,
you can carry, or a good computer, that's fine, but when you don't have that kind of stuff,
you should be looking for things with low poly counts, remember, I told you guys I was about to
make it editable, okay, yeah, look at these chairs, for example, now, these chairs, this is
pretty dense, so, yeah, that's a wrap, see you guys in the next one, where we are going to
texture the buildings, the floors, and then put the roof for the building, okay,
so, bye, see you in the next one, guys, peace out.
