Here is how to make your car paint look new faded paint restoration on car car hood paint fading

Autos hacks
81 followers
1 Video View·Feb 3, 2026
Hello it's Salim here. In today's video we're gonna be detailing this faded hood to this
mirror finish in few easy steps, which it will be sanding, polishing and waxing.
The first question we should ask, why that happened to the hood paint,
even though the car not that old. There are few reasons to fade the hood paint like this.
The car doesn't have under hood isolator, so all the heat from the engine hits the hood.
If your car doesn't have under hood isolator, consider buying one. Not only protecting your
hood paint, but it would silence some of engine's sound as well.
So here are the products we're gonna need. Masking tape, some fine sandpaper,
rubbing compound, polishing compound and a wax to protect the paint.
So we're gonna start with wet sanding with 3000 grit sandpaper to remove that oxidized layer
on the paint. And I'm gonna be using sanding pad, so I can have even sanding without creating hot
spot. When you're doing wet sanding, don't use circular motion, use linear motion instead,
because after that, you can polish linear line easier than circular motion.
Alright, we just removed that oxidized layer and the water makes it shiny.
After the water gets dry, it will get hazy again.
Next, I'm gonna use masking tape to mask the fenders and the windshield plastic trim.
Next, I'm gonna put 5 drops of rubbing compound and work on the half of the hood.
And I will do 4 passes, 2 horizontally and 2 vertically.
You can do this procedure by hand as well, but it will take you some more time.
Alright, after 4 passes, let's wipe the residue and check the result.
It came out so good, now we can do the other side as well with the same technique.
4 passes, 2 horizontally and 2 vertically.
Alright guys, here is the result after using rubbing compound and a polishing compound.
Next, we have to wax it and protect it from contaminant. And we have to hurry,
because it's about to rain. Applying wax is very easy,
just use the applicator pad that comes with the wax and apply it in a circular motion
with an even layer just like this and let it dry.
After it's dry, wipe raw with a microfiber towel just like this.
With using some of these products and simple techniques,
we just turned this faded paint to this mirror finish.
And you can apply this technique on any panel on your car,
whether if it's the hood, roof or trunk.
Alright, that's it for this video, hope the video was helpful and learned something new.
If it was, like and subscribe if you haven't already.
And I will see you in the next one. Bye for now.
