Growing Mushrooms at Home Multiply the M

Roadmap
18 followers
8 Video Views·Feb 2, 2026
If you like growing your own edible mushrooms at home, in this video I'm going to show you
how to multiply the mycelium of edible mushrooms. Whether you bought the seeds or you're doing it
as I showed you in a previous video, where I showed you the step-by-step process for extracting the
mycelium from the mushrooms we buy at the market. I usually do this first stage of growing edible
mushrooms in glass jars because they're easy to clean and reuse, and they also allow us to
sterilize all the seeds before inoculating. Now we're going to perforate the lids. I recommend
that it be approximately one centimeter because while we're growing all this mycelium inside the
jar, we're going to need a slight exchange of gases so that it can grow properly. I recommend
that you cover this perforation with cotton or some synthetic fiber. We're going to try to make
a small ball that is compact and we're going to pass it through this perforation that we made in
the lid. It is very important that this cotton is very firm and does not come out so that only gas
exchange occurs and no contaminants such as spores from other fungi can enter. If there is too much
excess on the outside, we cut it off. This is mainly to make it look neater when it is time to grow it.
In this particular case, I am going to do this multiplication of the mycelium in corn kernels.
We can also do it, for example, in brown rice. And here it is important to wash all the seeds well,
not only to remove excess dirt, dust, or soil that they may have, but also this first wash
will help us remove any remains of any type of spores that may be between all the seeds
to start cleaning them. And once we see that the water comes out very clear,
we are going to put them in a pot, cover them with water, and put them on the stove.
When we see that the water is starting to boil, we are going to lower the heat a little and let
it sit for approximately 10 to 15 minutes. We drain the water and let it sit for approximately
12 to 24 hours at room temperature. This is mainly to prevent any remaining resistant spores from
germinating and then, when we do the second sterilization, we will be able to eliminate them.
We spray all the materials we are going to use with 70% alcohol, from the spoon, the funnel,
which in this case is a plastic bottle cutout, and also the pot where we left all the corn to
sit at room temperature. After this time, we are going to start packing the corn into jars.
Here I recommend that you wash them well and add a little alcohol to achieve better sterilization.
It is important that we fill these jars approximately three quarters full to leave
an air chamber at the top. We cover them well because now comes the second sterilization that
we are going to do to all this corn that we have here and at the same time to avoid any
contaminants that may have remained inside the jar. Because if we sow in these conditions it
is very likely that we will have some contamination and we do not want that.
In a pot we are going to put a cloth on the bottom that is quite thick so that the jars do
not receive too much heat, but more than anything so that they do not break when the water is
boiling. And we are going to try to fill with water until half the height of the jar so that
the heat reaches all the corn seeds more evenly. If we see that the jars hit each other because
there is a lot of space, we can put some pieces of cardboard to prevent them from hitting each
other when the water is boiling. We cover them and put them directly on the stove.
When we see that the water begins to boil, we lower the heat and let it cook for 40 to 60 minutes.
After this time, we take the jars out and let them come to room temperature before starting
to inoculate. Now we're going to find a part of the kitchen that we can sterilize. In this case,
I'm going to use 70% alcohol and we're not only going to spray the entire counter well,
but also all the materials that we're going to use. But it's also important that we spray the
jar with alcohol where we have the mycelium that we had when we were sowing, for example,
on wheat straw. Because it's very likely that there are contaminants on the outside of this jar.
And when we work this way, where we're going to do something to try to keep the environment more
sterile, I'm going to recommend that you have a lighter so that there's a small area where we
have greater sterility. And if you don't have a lighter, you can do this on the stove. First of
all, and it's important, whether you bought mushroom seeds to start a new crop at home or
you did this method that I taught you to extract mycelium from mushrooms that you buy at the
market. When you're going to inoculate the substrate to start a new mushroom crop, always
try to keep some seeds at the bottom of the container so that you can multiply them. In this
case, I have this jar where I left some of these seeds and since mycelium grows a lot, it's normal
for all the seeds, in this case corn, to stick together. And here we can use a spoon to separate
them before planting. And now comes the best part, where we're going to start putting this mycelium
on all these corn seeds that we have completely sterilized. And here I'm going to recommend that
you put approximately one tablespoon of these seeds with mycelium for each jar. Because that
will be more than enough for the fungus to invade all these new seeds. Keep in mind that I'm showing
you this process in front of the camera so that you can see it clearly. But it's always advisable
to do it right next to the flame to avoid possible contamination. And as we add these seeds that are
invaded by the mycelium, I'm going to recommend that you move them a little with a well-sterilized
spoon so that they are among the new corn seeds that we are adding. And this will help to enhance
all this initial growth much more to carry out this multiplication. Once we finish doing all this
inoculation, we are going to leave all these jars in a drawer that you have at home. The important
thing here is that you can take them to an environment that is mainly dark. Because during
this entire first phase of cultivation, the mycelium develops better when we have low light
levels and a higher concentration of carbon dioxide than oxygen. But don't worry about this because
with this stopper that we made, we are going to achieve a slight exchange of gases. We can also
keep this darkness by leaving the entire drawer inside a black nylon bag. And if not, we can also
cover it with a black cloth. On the other hand, we are going to leave it in a place with a temperature
of approximately 20 to 25, which is the ideal temperature for a much faster invasion. Over time,
what we have to see is that around each of the seeds that we inoculate,
we are going to start to see that the mycelium begins to reproduce and over time,
the jars are all going to turn white. This is the best sign that we have a completely pure mycelium.
And in general, since we are going to make several jars in this multiplication process,
what I am going to recommend is that you separate the ones that you are going to use to inoculate
in some substrate, such as wheat straw, cardboard with coffee, whatever you use at home, and the
rest to stop the growth and to be able to use it much later, we are going to leave them directly
in the refrigerator. Keep in mind that this way we will be able to keep them for 2 to 3 months,
even a little longer. And the great advantage of this is that we will have much more mushrooms so
that we will not have to buy or take out any mushrooms that we bought at the market,
so that we can have a constant crop of our edible mushrooms directly at home.
I send you a big greeting.
