Don t change engine oil like this Drain oil vs Suction pump How to change Toyota Camry Engine OIL

Autos hacks
81 followers
1 Video View·Feb 1, 2026
Hello, it's Salim Ink. In today's video, I will show you different ways of changing engine oil on your car.
Regular way, which is from drain bolt or using oil pump extractor without going under the car, so which one better?
We'll find that out in today's video.
So both of these has their own pros and cons. The oil extractor I'm using is a 12V oil pump.
This launch straw is the suction side and this is the discharge side.
I will put the discharge side in a container, I'll measure how much oil will come out
and then I'm gonna open the drain bolt and see if there's any oil left in the oil pan or it's completely extracted with the oil pump.
So for that, I made a DIY funnel.
The drained oil will be pushed to the container after I made the first mark on the container.
That way we will have accurate measurement.
So the oil extractor pump I'm using is a simple 12V oil pump.
Comes with all the hoses and terminals.
It can be run on car's 12V battery and it has a decent suction.
But in the shops they use oil extractor machines which requires connecting compressed air to create that vacuum suction.
Alright, let's pull the dipstick out and open the oil cap to allow the air to enter while extracting oil.
Next, I'm gonna place the oil pump here and insert the suction straw in the dipstick hole until I can feel it touching the oil pan.
The waste oil will be discharged in this container and I will mark how much it will come out with the oil extractor.
We know that 2017 Toyota Camry's engine oil capacity is 4.6kW with the filter which is 4.35L.
Let's see how much it will come out with the oil extractor.
I had to twist the straw to take out as much as possible and then turn it off.
Let's mark how much came out. It's about 3.75L.
Next, I'm gonna pull the straw and insert it on my DIY funnel.
Let's see if there's any oil left when we remove the drain bolt.
And keep in mind the oil pump working again to suction any oil from the funnel.
Looks like some oil still left in the oil pan even though I twisted the straw to reach the other corners of the oil pan but didn't work that well.
Okay, drain bolt back on after the oil stops.
Tighten the bolt back and then clean the area as I always do.
Okay, here is how much came out with the oil pump extractor.
And here is how much came out from the drain bolt.
It's about 200ml.
If you wondering, Toyota Camry's engine oil capacity is 4.6kW which is 4.35L.
Why only 4 came out?
Well, the rest still in the oil filter.
So should you use oil pump extractor for engine oil change?
Well, it will be fast, clean but some oil still will be left in the oil pan.
You will never have complete oil drain.
If this car's engine oil been changed by a car dealer with oil extractor, he will have to put less new oil because some old oil still left in the engine.
So you will pay the same amount for less engine oil quantity.
After every oil change, I like to clean the oil catch can which I recently installed on my car.
It stops oil vapor from burning and building carbon buildup on the piston head and intake valves.
I have a detailed video how I installed on my car step by step.
The video link will be in the video description box below and YouTube card if you not check it out.
So which one you prefer, extracting oil or draining the oil from drain pan?
Let us know in a comment section below which one you prefer.
So that's for this video.
Hope the video was helpful and learned something new.
If it was, like and subscribe if you haven't already and I will see you in the next one.
Bye for now.
