76 Skating Essentials Back Outside Pushes Outside to Outside Edge Transitions

Figure Skating Learning Channel
12 followers
11 Video Views·Jan 31, 2026
We're Ksenia and Oleg, four-time U.S. national competitors whose goal is to make Team USA
and represent the U.S. at international competitions. We'll share with you what
we learned along the way, so let's make this journey together. Hi everyone, it's raining.
Paul is here and today we're going to be showing you a new skating exercise.
What are we shooting today Ksenia? We will show you how to do back pushes.
But first we'd like to thank Neil for his support of our skating. Thank you.
All right, let's go show them.
To do back pushes well, you have to be comfortable with skating backwards through your heels.
If you're not, check out episodes 48, 49, and 73 or find them in our skating essentials playlist.
We got a lot of information for you today, but first a quick summary of how this is done.
After that, we break it all down for you. You start going backwards on two feet on a shallow
curve. Press and push back to the long boards with your inside edge. You then skate the lobe
around on your back outside edge. When you finish the lobe, you flip your outside edge to an inside
edge as you press. You then press and push off your inside edge to the long boards, etc. Notice
how the pressure starts at your heel and works to the ball of your foot as you finish the push.
You should roll from the heel to the ball of the foot while maintaining your body weight over where
you are on your skate. A common mistake is to do the roll but to leave your body weight off your
skate and fall into the new foot. Remember that if your body weight isn't over the pushing foot,
you lose the majority of the power from that push. When you start your push, you should start
toward the long boards of the rink. The common mistake is to push to the short boards. This
makes the lobe shallow and small. Another important point to understand is outside edge to
outside edge pushes. What we're about to say excludes cross rolls and other cross-based steps.
For this video, our concern is when you have to push from an outside edge to an outside edge,
and both edges are either forwards or backwards. So for example, if your first edge is a backward
outside edge, you finish that edge with a knee rise. Then as you bend to press, you flip that
edge to an inside edge. You then push off that pressed inside edge to a new outside edge. This
is not only true for backward outside pushes, but also for all other same direction outside
edge to outside edge transitions. Take care not to take too long to press on the inside edge.
Also make sure that you actually press on the inside edge instead of falling into the new
outside edge. A common mistake is to not finish an outside edge, and instead to do a flat then
try to do the new outside edge. Here we see what the pattern looks like. Notice how the back outside
edge finishes, then flips to an inside edge, with the resulting last section of the lobe being a
shallow S shape. This doesn't mean that you have to make the whole lobe an S. That would be
incorrect. Just the last part of the lobe. When you switch feet, make sure that your feet are close
together. Don't wide step. There is a line of tension running from your free foot toes to the
skating foot shoulder. Feel this connection and use it to keep your position from wobbling.
Keep your shoulders and hips square. Don't unravel or lead with one shoulder.
Your arms should be strong but not rigid. Don't be tense as this will make changing the lobes
very difficult. Make sure that you don't stick your hips out and don't wiggle when changing feet.
Hey everyone, we really hope you enjoyed the video. If you did, hit the like button and click
on the subscribe to subscribe for more videos. Alright, see you next time!
