Ship in a Bottle Part 1

Arts and Design
68 followers
#art #decorate #design #diydecoration #sculpture #ceramic
On this week's show, I start a 6 part series to demonstrate, step by step, how to make your own ship in a bottle. I hope you enjoy the series.
If you haven't already, please don't forget to like and subscribe and click the bell so that you don't miss the notifications of future episodes of the show.
Thank you so much for dropping by the channel and taking the time to watch the program. It is very much appreciated.
Well hey there guys and welcome back on this week's show A Ship and a Bottle. Well truth be told this
project has been on my list of ones to do for about two years and I finally got tired of seeing it
sitting on that list and I thought now is the time to do it. Now it's going to be a multi-part series
where I would like to cover everything from materials to procedures to the tools you'll need
to the methods of making the ship and getting it into the bottle. I basically want to cover it all
so that by the end of the series you guys will have all the resources you need to be able to
make your own project. So where do we start with this? Well it all starts with choosing your bottle.
Well this is the bottle that I have chosen for my project and it's a classic shape and style
for the ship in a bottle. There are certain things that you want to look for when it comes
to choosing the bottle for your project. One is you want a fairly large opening here for
the throat or the neck of your bottle. This is where your ship is going to get inserted. There's
none of this stuff that they talk about where you cut the bottom out of it and all of that.
If you're doing it that way then you're not doing it quite right.
So you need a fairly large neck bottle. You can do it with thinner
necks it just means that you have to insert the ship in stages instead of in one piece.
So you can get away with a more narrow bottle as well if your neck is stubby. If it's a short
little stubby neck you can kind of finagle it a little better. You can have interesting
shaped bottles. You can put it in any bottle you want as long as the glass is clear and it's going
to give a clear view and an undistorted view of your project. Now you want to keep in mind that
the older the bottle the more distorted the glass is going to be. The old techniques of making
bottles of course had quite a few imperfections in the glass and it can distort your project but
it can also give a very interesting effect. The other thing you want to consider is shape.
Do you want a round bottle or a square bottle? If you have a square bottle when you sit it down
with your ship in it it will stand and stay on its own whereas a round bottle like mine here
you're going to have to fabricate some kind of a stand to hold it in place to display your project.
So other than those few things there the sky's the limit for your shape and size of bottle.
Just remember that the size and the shape of the bottle will dictate the size and the shape of your
ship making it either easier or harder to work on. A smaller ship is a little more difficult.
As the ships get bigger they're a lot more forgiving to work with. So you've chosen your
bottle well now what? Now what you need to do is you need to decide what type of ship you're going
to make but if you've chosen an old bottle like an antique or one that you've had around for several
years you want to give the bottle a good washing at this point in time to make sure that there are
no stains. You can place a white piece of paper behind it and you can readily see if there are
any stains there that are going to take away from your project. Just a little bit of dish detergent
a powder type does work better as it has a bit more abrasive qualities but you can get the inside
and outside of that glass bottle nice and clean and let it dry for quite some time. Don't just
suddenly start working on it. I'm not going to be washing mine until I'm ready to insert my ship
mainly because it's a new bottle and I already checked it for stains. I'm not going to be
manhandling it and then getting fingerprints all over and then having to wash the whole thing again.
The only purpose for washing it is if it's an older one just to see if it's suitable.
Well you now have your bottle chosen you have it clean so that you know it's suitable and no stains
and now it's time to choose the ship. There are schooners, sloops, battleships, windjammers,
catch. There's all kinds of different ships. You have to decide what type and how much work you
want to put in it. If you have a fore and aft mounted sails or if you have square sails they
get done completely differently as far as the spars are attached to the masts. So there's quite
a bit of thought process that needs to go in. I would suggest that if you are a beginner or if
this is something new to you that you choose a schooner style boat with fore and aft rig sails.
It's a little easier than the square mounted sails and as well that's what I'm going to be doing here
on the show today so you'll get the idea and have an example to follow along with. So now that you
know some of the things that you need to consider when choosing the type of boat what about the
construction materials as far as the hull and that sort of thing. Honestly you can use whatever type
of wood you want. You can use maple, walnut, cherry, mahogany. You can use anything you like.
However those harder woods are harder to work with on this small scale and they may cause you
some grief. You're better off to go towards the softer woods being basswood, pine, balsa,
that sort of thing. Those are the type of woods that will really lend themselves to an easy
working project when it comes to making designing and making the hull of your ship. If you feel like
using a hardwood okay fine. At least use something that's a little softer on the scale of hardwoods
like poplar which lends itself very well to being sanded and to accepting paint and as well it's
fairly easy to carve and work with. Well now that we know the bottle that we've got we know the
size of the neck of the bottle. We know it's suitable. We've chosen our ship and we now know
what type of materials to start making the hull out of. I can stop all the preliminary information
and we can get into the designing of the ship and that's what we're going to do. We're going to head
over to the bench and we're going to make a sketch of what we'd like to see inside that bottle.
Well the very first thing that you want to do is you want to sketch out your boat. You want to
sketch out the ship and make sure that it is how you like it. That it's how it's shaped and it's
the way that you want the boat to look. Now it doesn't have to be a perfect sketch. This is just
to give yourself an idea of how it's going to fit into your bottle. You want to include in your
sketch all of your masts and your sails because this is what's going to let you know this sketch
will be your reference point as you go to be able to know if you're on track and if this thing is
going to fit in your bottle the way that you want it to. Okay so my sails are a little wonky
but that's okay. We'll fix that up later. Now I'm not going to try to fool you and say that I'm
drawing this out of the top of my head. I've looked at an awful lot of pictures of these boats over the
last little while and prior to starting filming I laid out on here some key points that I would
need to connect in order to make this ship. Okay so this is roughly and I do mean roughly
what my ship is going to look like inside the bottle. Things may change and of course there's
going to be rigging where this here will come down and this will connect between the two masts.
All of your main lines there will also be the rat lines that come down here off of the mast
to support it side to side so you get the idea. There's going to be a lot more than just this
rough sketch but now we can get our bottle and compare to see number one, is it going to fit?
Number two, is it going to look okay? Now I'm not sure how well this shows on camera because
there may be quite a bit of glare from the lighting but this will fit just fine in our
bottle. Now there's one thing that you want to consider when designing your hull and it's
extremely important that you base your hull design on what I'm about to tell you now and that is
the size of your bottle opening. So if this is your bottle opening and you need to get your boat
in here, your hull should be no bigger than half the dimension of this opening. So this should be
your hull. This area up here is going to be used to get your masts, your sails, your flags, your
rigging etc etc in through the bottle but your hull should not be any bigger than half the size
of your bottle opening. If it is, you're going to need to divide your hull into sections and insert
them one by one and install them inside the bottle. Assemble them inside and that can be a little
tedious but for now we're going to keep it simple and keep our hull design to one half of the neck
diameter. Well before we can start making the hull, we need to make a working stand and what
this will be is basically a platform that our boat will sit on to give us both a means to hold
it in our hand to work on it as well as clamp it in a vice without damage. So I'm going to start
marking here. I have a scrap piece of poplar. I don't even know really how long it is. I guess
I could tell you it's roughly ten and a half inches long. It's probably a little overkill for
this but I'm going to place a mark here so that we're left with roughly and I mean roughly two
inches in the middle. I'm going to mark a line roughly and again I say roughly two inches down
from the top and then I'm going to make a line one inch above that. Now what I'm going to do
is I'm going to cut this off so that it's a square end and we're going to take this over
to the scroll saw and get rid of these waste areas right here but on our top section
where our one inch line is, we're going to take it over to the sander and we're going to taper
this in to a flat point and I'll show you that in just a second. So first off let's get this end
trimmed off here and I'm just going to do that at the table saw. Well I have cut the end square
and I've transferred our one inch line right here and then what I've done is I've left a little flat
spot at the top and tapered a line in to that from each point down here at the one inch by the
edge of the board. I'm going to take this over to the belt sander and I'm going to sand this taper
off and at that point in time once we get this sanded we can take the whole piece over to the
scroll saw. Well just before I cut this out there's one thing I forgot to mention and that is that I've
drilled a couple of 5 32 inch diameter holes here on the wings of our stand and that is because we
will be screwing our hull to the top of this while we work on it. But now with a number seven reverse
tooth blade I'm just going to cut away the waste areas and then our stand will be done. Well now
it's time to start working on our hull and this is where the real fun begins. I have chosen basswood
to make mine out of. It's a great carving wood. It's a very tight grain and it accepts paint well.
It sands well and honestly it's just nice and soft and easy to work with. I have it cut to the
dimensions that I need for my hull. It's seven eighths of an inch wide and it is five eighths
of an inch thick. Now what I've done is I refined the shape and the lines on my hull design and I
ended up cutting out of some MDF or hardboard. I ended up cutting a couple of templates. So what
I'm going to do is I'm going to trace the design of the top view of my hull down onto my blank of
basswood and now using a square I'm going to transfer my bow and my stern lines. There's the
tip of my bow, tip of the stern. I'm going to transfer them onto our side profile because we
also need to draw that as well and for that I've also refined my design and made a side view template
as well and we'll just trace that out. Well before you do any cutting it's important to check your
blade for square. We're going to be using a method called compound cutting here and having a square
blade is absolutely crucial. So what I'm going to do is I'm going to cut our side profile first.
Don't forget to save your off cuts. Now at this point we're going to use a little bit of clear
tape. You can use packing tape you can even use masking tape but I find that clear tape is better
for this because you can see your pattern through it and we're going to tape our piece back together
so that section that's separated there while cutting the side profile we're going to put it
back together to form one piece again and once we get it securely taped together now we're going
to cut out our top profile and once you get those pieces cut you can remove your tape and you should
be left with the rough shape of your hull and unfortunately guys that's all the time that we
have for this week. Now it may not look like we got much done but think about this now there's a lot
of information that's here in this show between picking your bottle and what to look for the stock
that you would choose drawing out or sketching your boat choosing the type of boat and then of
course the compound cutting on the scroll saw to get the rough shape of our hull. There is so much
more to come on this project and I'm not changing the pace of it I'm going to keep it slow and steady
so that we get all the information we can into this series and make it so that you have the
confidence to make your own ship in a bottle because guys if you're not trying this out
you're really denying yourself one heck of a lot of fun. If you haven't already please don't forget
to like and subscribe and click the bell so that you don't miss the notifications of future episodes
of the show. This has been a great day in the shop I hope that you've enjoyed the content
I hope that you're going to try this for yourself and I also hope you're going to
join me again next week when I bring you yet another Alternative Tuesdays.
