I Tested IKEA s New Smart Home Devices One Major Flaw

Smart Home Devices
120 followers
2 Video Views·Jan 31, 2026
I’ve been living with IKEA’s new Matter smart home lineup for two weeks straight. Motion sensors, door and leak sensors, Kajplats bulbs, Dirigera hub, the whole thing.
In this video, I test how these $10 IKEA sensors stack up against more expensive options like Aqara and the Philips Hue motion sensor. Same room, same conditions, side‑by‑side tests for reliability, response time, accuracy and range.
I've been testing the new IKEA smart home devices for two weeks straight
and I found something nobody's talking about. These $10 sensors performed
identically to $40 competitors. Zero disconnects, same response times,
same accuracy, so why does everyone else cost four times as much?
It sounds like an easy win for IKEA but there is a catch.
There's one massive limitation that might be a deal breaker for you
and honestly it might also be the smartest design decision IKEA ever made.
This is the two-week follow-up I promised. Everything you're seeing here is just IKEA's
own hub and app. No homey, no home assistant, no Google, Apple or Alexa integrations in this video.
All of that is coming in the next video. Let me show you exactly what I found.
For the last two weeks I've tested all the new devices and every corner of the IKEA home app.
I've used the motion sensors, set up automations, checked sensor accuracy
and pushed the system to see where it breaks.
I've compared response times against sensors that cost much more.
I've even put these things in my fridge. Yes, really. I'll show you why in a minute.
Here's what actually happened. First, the test everyone wants to know. Reliability.
Two weeks in, zero devices have disconnected. Not one.
And if you've ever used cheap smart home gear, you know what usually happens.
You set up a motion sensor, it works for two days,
then you spend a week wondering if the battery died or if it just genuinely hates your setup.
You reset it three times, you move it closer to the hub,
you whisper sweet nothings to it at two in the night.
This hasn't happened with IKEA. The 3kplatz bulbs stayed connected the entire time.
Motion sensor, temperature sensor, door sensor, water leak sensor, all still paired.
The system is stable. But stability is just table stakes.
Let's talk about what actually matters.
And here's where it gets interesting.
I tested the Timmerflot and Alpstuga sensors against an Aqara T1 sensor,
which I have calibrated in HOMI against another thermometer before.
Room temperature first. Timmerflot showed 23 degrees Celsius.
Alpstuga showed 23 degrees. Aqara showed 22.8.
Pretty good match. Okay, that's good. But what about lower temps?
So I did what any normal person would do. I put all the sensors in my fridge.
My partner walked by and raised an eyebrow. I didn't explain.
Some things are better left unexplained. A few minutes later, I pull them out.
IKEA read 9.5 degrees Celsius. Aqara reads 9.5 degrees.
Perfect match. These $10 sensors are legitimately accurate.
Not good enough for the price accurate. Actually accurate.
A lot of you asked if these sensors actually keep a history with graphs over days or weeks.
Once you're signed in to the IKEA Home Smart app, have your Dirigera hub connected,
and you've verified your email for remote access, you do get proper history graphs for supported
sensors. You can look back over days, weeks, and even months to see how temperature,
humidity, or air quality has changed. It's genuinely useful to see those trends,
but it's still not the same as the deep, exportable analytics you get in something
like Home Assistant or Homey. If you want to permanently log every reading for years,
or combine that data with lots of other sensors, you still want to pull it into another platform.
There were also questions about the air quality monitor being hard to set up and maybe inaccurate.
In my setup, once it was paired, it has been consistent, but again, the app is focused on
showing you how things look right now and over the last weeks, not being a full-blown data analysis
tool. But what about response time? Because accuracy means nothing if the sensor takes 30
seconds to notice you walked into the room. I set up the IKEA motion sensor and an Aqara P1
motion sensor in the same position. The Aqara costs about $20, and it's known for being fast
and reliable. Same lighting setup, same distance from the hub, same test. I walk into the room,
lights on directly. The IKEA sensor matched it. Consistently. $10 versus $20. The cheap sensor
kept up. Battery life is what really caught me off guard. I installed the motion sensor and door
sensor two weeks ago on fresh batteries. I'm checking the app every few days expecting to
see the percentage drop. Still at 100%. Now, two weeks isn't enough to project actual battery life,
I know that. But IKEA estimates these sensors will last about two to three years on a single battery.
And if you use the old IKEA Zigbee door and window sensors, you probably remember them chewing
through batteries much faster than that. These new ones switched to AAA cells. And after two
weeks of normal use, everything here is still at 100%. AAA batteries cheaper and easier to find
than coin cells. So even if the real lifespan lands closer to two years than three, it's still
a clear upgrade over the old generation. Now this is where IKEA made a choice that either makes
perfect sense or drives you crazy depending on who you are. Let me show you what works first.
Basic control is smooth and responsive. Lights on, lights off, dimming, color temperature,
everything is instant. You can name devices, organize rooms, control everything from a clean
interface. The interface is actually really nice. It's minimal, it's intuitive, it doesn't overwhelm
you with options you'll never use. Scenes work flawlessly too. I created a few scenes that dim
lights to 20% and set them to warm white. One tap, everything happens instantly. Works every
single time. For probably 70% of people that's really all you need. Turn lights on when you
get home. Turn them off when you leave. Dim them for movie night. Done. A lot of you had very
specific questions about the Kplatz bulbs. First, is there a party mode that slowly fades through
colors on its own? Right now there is a simple effect in the app that cycles through colors,
but it's not super customizable. Second, how do these whites compare to the old trod-free bulbs?
To my eyes, the whites on Kplatz are cleaner. The cool white looks less greenish and the warm
white looks more natural than the old three-step very warm warm daylight system. So if what you
care about is simple good-looking light rather than endlessly tweaking color temperatures,
the combination of these bulbs and the built-in scenes will probably be enough.
But here's where it also gets limited. What happens when I try to create a complex automation?
At night, if I get up and head to the kitchen, I don't want the lights blasting on at 100%.
That wakes you up completely. What I want is that when motion is detected between 10 p.m. and 6 a.m.
turn on lights at just 20%. Enough to see where you're going. Not enough to destroy your sleep.
But during the day, between 6 a.m. and 10 p.m. turn on at 70% because I need to see better.
Seems reasonable, right? Can't do it. No time restrictions, no combining conditions,
no conditional logic. IKEA gives you basic automations. Motion detected, turn on light,
turn off lights at specific times. That's it. The same thing applies to some of the routines
you asked about in the comments. For example, when I leave home and turn off all the lights,
warn me if my rooftop window is still open. With the current IKEA app, you can absolutely turn
lights off at a certain time or with a button and you can see whether a window sensor is open.
But you can't combine that into, if I leave and this window is open, send me a notification.
Same story for real presence detection or geofencing. There is no built-in,
when everyone leaves the house, trigger yet. And at first I was frustrated by this. I kept thinking,
why didn't they just add a few more options? It wouldn't even be that hard. But then I realized
something. Watch this. On the left, the IKEA app controlling IKEA devices. On the right,
HOMI Pro controls these exact same IKEA devices. Same hardware, different software. Look at what's
possible. These are the automation options for the IKEA sensors and IKEA lights. They can do
things the IKEA app doesn't even have options for. Multiple conditions, sensor-based triggers,
cross-device logic, time-based variations, same $10 sensors, different brain. And just to address
something a lot of Zigbee veterans mentioned on the last video, you're absolutely right that the
old IKEA Zigbee devices could be rock solid if you paired them directly to a Zigbee stick with
Home Assistant or other setups. When I said the old integration was messy, I was mainly talking
about the experience for a more typical user stuck with the official IKEA gateway or trying
to bolt that gateway onto another ecosystem. With this new matter-over-thread generation,
IKEA is leaning much harder into use whatever brain you want. And that's what makes these cheap
sensors really interesting. And that's actually the smartest thing IKEA did. Because here's what
IKEA is actually saying with these limitations. We're not trying to be everything to everyone.
They built reliable hardware on an open standard. If you want basic control, use their devices,
hub, and app. If you want advanced features, use a different hub. You're not locked in.
That's either genius or a cop-out depending on what you need. But after two weeks, I think it's
genius. Now, if you're actually considering this, you're probably comparing it to something.
Most people compare IKEA to Philips Hue. The IKEA motion sensor is $10. The Philips Hue motion
sensor is $40. Same battery life, same response time. Both work reliably. So why does one cost
four times as much? Philips Hue requires the Hue bridge. It works with HomeKit, Google Home,
and Alexa, but only through that bridge. Everything has to go through Philips Hub and Philips
ecosystem. The IKEA sensor, it works with everything natively through matter-over-thread.
Take that $10 IKEA sensor and move it to HomeyPro, Home Assistant, or Acara. Same hardware,
completely different capabilities. Advanced automations, complex triggers, sensor-based
logic that Philips bridge doesn't even offer. The Hue sensor costs $40 and ties you to their
ecosystem. The IKEA sensor costs $10 and works with any matter-over-thread ecosystem.
That's not just a price difference. That's a freedom difference. And when it comes to smart
homes, freedom is the future. If you want five motion sensors for your home, IKEA costs you $50.
Philips Hue costs you $200. You're saving $150 on sensors alone, and they work exactly the same way
in your advanced hub. Two weeks in, I have one automation I care about most. My dining room
corner lamp turns on at 6 p.m. every day without fail. It hasn't missed a single day, not once.
That's what I mean by reliable, not mostly works, reliable. In terms of range, in my home,
the hub sits in the kitchen and I've got sensors and bulbs one or two walls away and down the hall.
Because these devices form a thread mesh, every powered bulb or plug helps extend coverage. So
once you have a few spread around the house, the network gets more robust. If you only buy one hub
and a single battery sensor and put them at opposite ends of a large house, you're more
likely to hit the limits. I was starting to get delays and bad connection with the Bilrisa remote
when I went eight to nine meters away with a wall in between. So the question is, is cheap
actually good? After two weeks, yes, but with one major asterisk. So here's my honest verdict.
What I love, the price, the reliability, the response times, the battery life, the clean interface,
and the matter compatibility. For $100 to $150, you have a smart home setup that actually works.
What I don't love is that you can't build complex automations with multiple conditions.
No presence detection or geofencing. Sensor triggers work, but only for simple stuff.
And while matter devices from other brands show up in the app, creating automations that combine
IKEA and non-IKEA devices is pretty limited. If you want the IKEA app experience, you do need the
Dirigera hub. That's the brain the app talks to. It runs automations locally, so they keep working
even if your internet goes down. And because this is just open matter hardware, you're not locked in.
You can start with IKEA's app, then later move the same bulbs and sensors to another platform
if you want to. That's exactly what I'm testing in the next video. You're not wasting money either
way. And judging by the comments on the first video, a lot of you still had very specific
questions. So before we wrap up, let me hit a couple of quick ones. Can you mix the older IKEA
Zigbee devices with these new matter over thread ones? Yes, but how you do it depends on which hub
you're using. In some setups, they all sit behind the same bridge. In others, you pair them
separately. Are these devices available everywhere? Not yet. Some regions still don't list them on
their IKEA site, so check your local store before you plan a full upgrade. The full lineup should
be available in EU and US by April 2026. And are the door, window, and leak sensors reliable enough
to trust? In this two-week test, they've stayed connected and responsive, but I'll keep an eye on
long-term stability and update you if I start seeing sensors drop off the network. And because
so many of the questions are about using this hardware with other platforms, I need to show
you something. Remember those limitations I mentioned? The automations the IKEA app can't do?
Watch what happens when you take $100 of IKEA hardware and give it a professional brain.
That's the next video. I'm taking these exact devices, pairing them with Homie Pro, and living
with them for two weeks. Lights that automatically switch between a bright work scene and a warm,
relaxed scene using the same motion sensor. Door sensor, geofencing, and door lock talking to each
other. We're also collecting feedback from the community for all the other major platforms.
People running these IKEA devices on Home Assistant, Apple HomeKit, Google Home, Alexa,
SmartThings, and other platforms. What works? What doesn't? What surprised them? The real-world
experience across every major platform? If you left a comment asking about Home Assistant
compatibility, using them without Dirigera, or weird edge cases like buttons not showing up in
automations in Google Home, that's exactly what I'll be digging into. If you want to see what
cheap, reliable hardware can do with professional automation software, and hear from a community
using all the major smart home platforms, subscribe so you don't miss it. Let me know in the comments
what surprised you about IKEA's smart home, or if you're already using it and have your
own experience to share. Seriously, I want to hear your setup. Which platform are you using?
What automations did you build? Did you run into any issues? Thanks for watching,
and I'll see you in the next one.
