I Took The Mini Kraton WAY Too Far!

RC- Car
12 followers
Comments are disabled for this video.
The new Mini Kraton is an awesome little basher and today we're going to upgrade it.
We're going to go more power, bigger tires, a bigger battery and try some stuff that might
not even work.
And because a lot of you guys wanted to see it, we're also going to compare it to the
Rolarlo Omni Terminator.
If you missed my Rolarlo SPK video, this thing's all torn apart because we did a really cool
upgrade on that buggy.
But now, of course, in order to actually compare it to the Omni Terminator, we need those parts
back.
I think this is going to be a really interesting comparison, especially once we upgrade the
little Mini Kraton, as the OT is a much larger vehicle, but it's actually cheaper.
But they are close enough in price range where I think people will be cross shopping between
the two.
I'm actually really excited to do some upgrades on the Mini Kraton.
While there aren't a lot of dedicated parts available for it yet, we can definitely put
a more powerful ESC in it, upgrade the servo and a bunch of other things.
Because the differential is similar, we might even be able to upgrade that, though I'm not
sure.
And we've even already got some 3D printed parts that someone else made that I think
are going to be really cool.
Now we just got one more nut and bolt to remove and then we can pull this whole corner off
and drop it right back on the OT where it came from.
However, while these are off, it gives us a great opportunity to compare the size and
scale to the Mini Kraton.
As we do this, I think you might start to see why I didn't initially want to compare
these two.
The tire comparison alone shows just how much bigger the OT is than the Mini Kraton.
And if that didn't convince you, take a look at the difference between these two arms.
While they are similar in length, the absolute beef of the OT compared to the Mini Kraton
really puts it in a different category.
With that being said, they both use kingpin style steering and the knuckles themselves
really aren't much different.
And I would say the Mini Kraton actually has the advantage because this is in double shear
while these are in the much more common single shear.
Basically, that means this pivot is supported on both the top and the bottom and the screw
goes through both sides, while the pivot on the OT is really only supported on one side.
Interestingly, even though the OT is carrying a lot more weight, the axle shafts are very
similar in diameter.
These are 3.3 millimeters and these are about 3.45.
That extra diameter does make it stronger, but again, it's pushing more weight too.
I'm definitely curious to see how these stock Mini Kraton axle shafts handle 4S, but I'm
more curious to see how the differentials hold up.
Being essentially the same differentials as the 223S Groms, this thing's going to be under
quite a bit of load.
Comparing them to the size of the Omni Terminator, this is actually an upgraded OT differential.
You can see the OT has a much bigger ring gear and everything else on it is just larger.
Again, though, the OT is dragging around quite a bit more weight than this is.
To get a really good idea of the scale difference between these two vehicles, I'm going to go
ahead and pop the rest of the wheels off the Mini Kraton.
And while I'm doing this, I want to let you know I was looking at the stats on my videos
and I noticed that a lot of you guys aren't subscribed.
About 70% of you are and that's an incredible number, though sometimes YouTube actually
unsubscribes people.
So, I want you to take a quick look down and see if you're subscribed.
If you're not, hit that subscribe button.
It tells me I'm doing a good job and lets me know you want to see more videos just like
this one.
With these two side-by-side, you can see that the Omni Terminator is quite a bit longer.
It's also quite a bit wider and pretty much everything on it is beefier, including having
a larger battery and battery tray.
And that brings up one of the questions I got really frequently.
Will this 2200 mAh Rolarlo battery fit in the Mini Kraton?
And did this 1300 mAh battery I was using reduce the top speed on 3S?
Well, to answer one question, yes.
This fits absolutely perfectly in the stock tray and the latch clamps right down on top
of it.
To answer the top speed question, however, we need to take this thing outside and see
what it'll do with that battery in it.
This is also going to be a great baseline because later on we're going to find out what
this thing can do on 4S.
All right, we got 47 miles an hour with that 1300 mAh battery, which isn't quite the 50
they said we would get.
So let's see if a bigger battery does help.
Here we go.
Full throttle.
That does feel faster.
OK, very cool.
Let's run it back.
I do think that is faster.
Of course, this isn't the battery it's going to be coming with, but it's a fairly similar
battery in both size and capacity.
And yeah, the capability of this battery definitely feels better than the 1300.
So I think the 1300 might have been holding it back.
Let's see what we got.
52 miles an hour.
Oh, there you go.
That makes me wonder if the takeoff hesitation is going to be better as well.
No, it still has that pretty soft takeoff, but it definitely has plenty of power once
you get going.
And once you're moving, you really can't even notice that it's like that.
It's really only a problem from a standstill.
And honestly, how often are we standing still?
I think really you're only going to notice it if you're trying to do something like standing
backflips.
And this ESC is going to be going away in a few minutes anyway.
But before we do that, someone mentioned that I might have gotten the punch wrong in the
last video.
I set it to level nine and that's the way Hobbywing does it.
But Castle actually does punch control and level one is the most punch.
So to set it to one, we're just going to ignore the instructions in the manual, hook up our
battery and then turn on the ESC.
But we're going to keep pulling the button down till we get to setting four.
It's set to nine right now.
So we're going to hit the button and now it's set to one and we can turn it off.
And that's either going to give us the most ESC punch or the least ESC punch.
Before we find out, though, I want to install our first upgrade and it's a prototype.
This battery does fit in here, but it's a little bit tight and I'd rather use a strap.
In the last video, I said we could remove this latch and just use this pin for the strap
on this end.
But we would need a custom way to mount it on this end and someone's already beaten me
to the punch.
With this central spine removed, you can see that this tab is actually a separate part
that unscrews.
So now we can remove this.
And the upgraded part's actually a really clever design that keys in really nicely into
the brace.
It's got an embedded nut and a longer screw that comes up from the bottom and holds it
in really securely.
And now we can reinstall the center spine along with the front pin that used to hold
in the hard latch.
We can install our strap on this end.
By the way, it's definitely easier to do it before you install it on the spine.
Wrap it around the post on this end and we now have a strap style battery mount.
Like I said, this is a prototype that we're going to be durability testing for the first
time right now.
But assuming this works, and I think that it will, I'll tell you how you can get one
at the end of the video.
But now with our first upgrade of many installed, let's go see if we made the punch better or
if we made it worse.
All right, here we go.
Is it any better?
Nope.
That is significantly worse.
So punch is as I would expect it to be based on the hobby wing definition, and it's not
set up like the Castle ESCs are.
This is definitely a lot slower than it was before.
With the punch set back to stock, we need to get a baseline performance comparison between
this and the Omni Terminator.
It does have a bigger battery in it now, and like we saw, we have more power.
And yeah, we definitely have more power in the air as well.
This thing feels a fair amount more punchy than it was before and definitely a little
bit better.
It felt fine with that 1300 mAh battery, but it certainly wasn't doing it justice.
And the 2200 mAh battery we have in here now is definitely closer to what you'll get out
of the box.
So this is definitely a really good comparison between this and the Omni Terminator.
This feels really, really nice right out of the box.
It's got plenty of performance, lots of punch, double backflips, no problem whatsoever.
Other than that slight off throttle hesitation, it just feels really, really nice, really
dialed and feels like an excellent backyard basher.
I've got no complaints about this whatsoever.
I am definitely curious to see what it's going to do on 4S though.
Before we do that, we're going to try it on 3S with that other ESC just to see how it
feels without any kind of hesitation.
Now though, let's see how the Omni Terminator behaves.
The sheer size advantage that the OT has definitely makes it easier to handle on rough terrain.
Though to be honest with you, it's not that much better than the Mini Kraton is.
The Mini Kraton tires really do give it a lot of excellent traction and its suspension
works really well too.
We know that the long-term durability of the Omni Terminator, especially after the update
they did last year, is really good.
We don't really know about the long-term durability of the Mini Kraton.
Handling wise, they both feel pretty good.
I don't have the speed pinion in the Omni Terminator, so it doesn't really have the
wheel speed for crazy backflips.
So we're just getting single backflips out of it, though it does handle those backflips
reasonably well.
This truck is also pretty stable on the ground.
For being a monster truck, it's got a fairly low center of gravity, so it doesn't do a
lot of traction rolling.
And these tires are fantastic general purpose tires.
Though again, I think even though it's smaller, the Mini Kraton is taking the lead here.
It handles a little bit better, and overall it's just a bit more fun.
I think that the Omni Terminator has an advantage off the line, not really though.
It has a little bit of a hesitation too.
I think the ESCs might be programmed that way to protect the drivetrain, but some people
might not like that.
Overall, just like the Mini Kraton, the Omni Terminator feels really, really good.
Though given its size advantage, it's not that much better than the Mini Kraton is.
Now let's see what the Mini Kraton can do with some upgrades.
We've got several upgrades to try, some of which might end up pushing this truck beyond
its limit.
But first, I want to look at something that we really didn't give enough attention to
before, and an upgrade a lot of you guys are going to want to do.
My assumption on this new SX-114 servo is that it was exactly the same as the SX-110,
and therefore should be upgradable with any Grom servo.
That was an assumption though, so today let's put it to the test.
We're going to be doing so with this Goop RC servo and servo horn.
I've never heard of the brand before, but I like to test out Amazon specials from time
to time.
Before we do that though, let's compare this SX-114 to the SX-110 that you get in the Grom.
Externally, they appear to be the same size and appear to have the same case.
However, the servo savers are significantly different, and I'm not sure if they're the
same inside or not, so let's take a look.
There have been a lot of new viewers on this channel lately, and I think that's awesome.
I want to say welcome, and let you know that this channel isn't monetized, nor do I take
any affiliate commission, so if you're enjoying yourself, the best way to let me know is to
comment down there, hit the like button, and then subscribe.
That way I know I'm doing the right thing, and I'll do more of it in the future.
First thing to note is that the screws are a different length, with the SX-114 actually
having shorter threads.
And then pulling the bottom cover off the SX-110, as well as the SX-114, we see that
these are completely different inside.
The motors appear to be about the same diameter, but the driver boards couldn't be more different.
Pulling the SX-114 apart, we see we have a mostly brass drivetrain with one small steel
gear, and then inside the SX-110, we've actually got more steel gears, and these look a little
bit beefier overall.
The base of the 114 servo saver will fit on the 110 splines, and the two servo savers
appear to be pretty much the same in relation to each other.
This one's just beefier, so you could upgrade your Grom with the servo saver from the Mini
Kraton.
That means that this aluminum Goop RC servo saver should fit on the Mini Kraton, though
I'm not 100% convinced this is actually going to be an upgrade from the SX-114.
The output's aluminum, though it does feel like there's a little bit of steel inside.
It does, however, physically fit in place of the stock servo just fine, and it mounts
up exactly like you would expect.
One of the big potential downsides to these aftermarket servo savers is sometimes they
fit really loose on the splines of the servo.
However, this one feels like it fits nice and tight.
That means I think we're going to go ahead and go with this one instead of using the
stock servo saver.
I'm kind of surprised about that.
Let me finish getting this installed and adjusted, and let's go see if it's any better.
All right, firing this thing up.
The steering feels okay.
It's not the best.
I think it might be a little bit better than it was with the stock servo, but I'm not sure
it's much better.
Under way, it definitely feels just fine.
It's got plenty of power and speed to turn the wheels and keep them turned.
I don't really think it's doing a huge amount more than the stock servo did, but again,
it does feel fine, and I think it'll be just fine for a replacement servo.
I don't know how the strength's going to be.
That's something we're going to have to test out here in just a little while, but overall,
for a fairly inexpensive servo that you can get on Amazon next day, I think it feels okay.
That actually felt pretty good, and we're going to test it more later, but now it's
time to get serious because I want more power.
Since we're going to be taking this ESC out and the servo is mounted to the bottom of
it, we're going to use this Grom ESC plate.
I believe this mounting solution is the same as on the Grom, and actually, yeah, not only
does it look like it's going to fit, but this tab right here appears to support the back
of it.
I've been kind of torn on whether or not I want to use the Castle Mamba Micro X2 or the
Castle Cobra 10.
This thing's going to be a little bit overweight for the X2, but I'm not sure the 10's going
to fit.
There is, of course, only one way to find out, so let's get this servo installed on
the adapter plate, pop that in the car, and see how it looks.
Obviously, there's plenty of room for the X2 in here, and while it's a very tight fit,
it looks like the Cobra 10 will fit as well.
Will the body fit on with the Cobra 10 in there?
Yeah, it will.
Of course, the ESC has four millimeter bullets and the motor has 3.5, so that's not going
to fit.
I do have these adapters, and that will technically work, but that makes for a very tall setup
and I'm afraid I'm going to break something, so what I think I want to do instead is take
a four millimeter male bullet and a 3.5 millimeter female and make a 90 degree adapter like that.
To do that, I'm just going to add some solder to the end of this connector, nice big blob,
and then solder this one to it.
And just like that, we've got a nicely soldered adapter, and we'll add a little bit of heat
shrink to prevent shorting.
Perfect.
Now, let me just do that two more times, and we should be good to go.
I don't think there's any risk of those shorting out, and it'll be a lot lower profile.
Of course, you could also just solder new connectors onto the motor wires, or you could
use a motor that has four millimeter bullets on it already, though given the length of
the Castle Cobra 10, you're not going to be able to get much bigger of a motor in there
than stock.
There are definitely smaller ESCs you could run and still get 4S, but this thing's 6S
capable, which we might be trying later.
Now, even though this two-in-one ESC allows you to run a separate receiver and keep this
ESC, it doesn't allow you to run a separate ESC and keep the internal receiver.
That means we're going to have to run our own receiver, which looks like it's going
to fit nicely right there.
So let me get all this wired up, and let's make sure the body still fits on.
Moment of truth, and yep, it fits.
There's actually surprisingly little room underneath this body.
This cage takes up a lot of the free space, and other than right in here, there isn't
a lot of extra area.
Fortunately, there is a good amount right above the ESC, and at the least, there's a
spot right here to put a receiver.
Now, we've got this thing way overpowered.
Let's go see what it can really do.
Okay, first thing I want to see is if we get faster than 52 miles an hour with this ESC,
we don't have any stability control now because we don't have our gyro anymore.
So we'll see how good the natural stability of this thing is, and honestly, it's kind
of just as good as it was with the gyro.
That's really impressive.
Thing still feels nice and quick.
Full throttle.
Oh, that was close.
All right, let's get one more pass out of it.
Full throttle.
All right, let's see what we got.
It feels so stable even without a gyro.
That is a huge testament to this platform and this chassis, and we got 52 miles an hour
exactly the same as before.
Getting the exact same speed means the ESC definitely isn't the limiting factor, but
now I'm curious to see if we've lost that off-throttle hesitation.
Oh, yeah, she's definitely ripping now.
It's tearing up the grass right from the go, and that feels quite a bit more explosive
from the start.
This ESC from Castle is one of the most powerful ESCs you can get, and on this car, it's going
to be pretty under-stressed.
Of course, we're only doing 3S so far, but from a stop, oh, yeah, she's definitely got
the jam.
Maybe just a little bit of cogging, but not too bad.
It definitely has way more power from the start than it has with the stock ESC.
Not that the stock ESC is really that bad, but this thing really flies with this ESC,
and don't forget, this is only on 3S.
We were able to do 52 miles an hour on 3S and get this kind of speed and backflips,
and there is still more performance to be had.
This thing can do all the way up to 6S.
I'm not sure we're going to do a full 6S in this video.
Maybe in the next video, though, because I've got a really cool idea to do with this car
that I think you guys are definitely going to want to see.
Make sure you hit the subscribe button so you don't miss that, as it's going to be pretty
neat, and I've got some new parts I'm going to be showing you as well from ProLine that
should be awesome to mess around with, but yeah, 3S with the Castle Cobra 10 feels really
nice.
Though, I am definitely curious to see what this thing is going to do on 4S.
Before we go to 4S, though, there's one more upgrade I want to try.
This is the Globe Act all-metal differential for the Grom, and I want to see if we can
make it work in the Mini Kraton.
The Mini Kraton and Grom differentials look very similar, though there is one major difference,
and I'm not sure it's going to be cross-compatible, but if it is, that'll open up one more potential
upgrade.
Now, obviously, there will be a bunch of upgrades available for this thing in the future, but
as of right now, it is pretty limited.
Before we do that, if you watched the last video, you might be asking how I fixed this
front shock.
At the end of the video, this lower spring perch had gone missing.
Amazingly, I was actually able to find it in my yard, but someone mentioned you might
be able to use one off of Grom, so let's find out.
Now, obviously, a 223S will be the best candidate for this.
This is a Typhon 223S, so we'll just pop this spring perch off of here, and with the shock
off, we can get this spring perch off of here, and comparing the two, they actually do look
pretty similar, though this one is smaller, and unfortunately, being smaller, it just
doesn't quite fit.
Now, I don't want you to think that losing these spring perches is going to be common
because I lost mine when I threw this thing way up in the air, but if you do lose it,
so far, replacing it's going to mean buying an entire new set of shocks.
However, the guy who's developing this battery strap holder is also developing spring perches.
I'll tell you more about that in a minute, as this does seem to be working pretty well.
But now, let's see if we can make this differential work, and then it's going to be time to go
4S.
We got a solid 52 miles an hour on 3S, and I'm hoping for 60 on 4S.
That might actually sound pretty conservative, but because of the exponential nature of wind
resistance, the faster you go, the harder it gets to go fast.
Externally, these two differentials look very similar, though the aluminum case on this
upgraded one should hold the gears in place better, as you'll always get some flex in
this plastic.
The big difference between the two is on these output cups, though.
Because the Mini Kraton has larger pins on the axles, the slots in the output cups are
also larger, and I'm not sure we're going to be able to swap them over.
Before we find out, I do want to take a peek inside this differential and see if it looks
any different.
There's one difference right off the bat.
These screws are actually smaller than 1.5 millimeter.
That's a little annoying because it means you need tools you wouldn't normally have.
Fortunately, I do have them, so we can still take a look inside.
Popping this off, you can see we do have one big upgrade.
We actually have a gasket in here, which we don't get on the stock differential.
And there's an O-ring behind this gear, which means this is actually a full-sealed differential.
And even though these don't normally leak too badly, this is a nice upgrade.
Inside, however, the gears do look pretty much exactly the same, though again, this
aluminum case will keep these inside gears together better than a plastic case will.
Of course, the risk with these aftermarket products, especially Amazon specials like
this, is even though they look nice, they might not be nice.
For instance, it's entirely possible that this ring gear might be lower quality than
the stock one.
The real question, though, is will these Mini Kraton Output Cups fit the Grom differentials?
These just unscrew from the outside, kind of like the XMAX do, and there is quite a
bit of thread lock on them, so make sure you're using good tools if you take these apart.
If you strip this screw out, you're going to be having a bad day, ask me how I know.
But the real question is, does it fit?
And the answer appears to be yes, I think we're in business.
And now, after installing the other side, I believe we have the world's first upgraded
Mini Kraton differential.
Let's get it installed.
And now, let's slap a big, stinky SMC 4S battery in here and see what it can really
do.
If it survives that, maybe we'll go big tires.
All right, guys, 4S power, can we hit 60 miles an hour or will we crash out?
Let's see what we can do.
Here we go.
Full throttle.
Oh, shoot.
Oh.
Guys, that was a hard hit, but get this, I don't think we broke anything.
We managed to get 58 miles an hour and everything is still straight, the car still rolls, steering
still feels good, and pretty much all it seems like we did was knock off the receiver.
So let's plug this thing in and see if we got away with that.
Steering works and the throttle works.
Let's go bash.
I really cannot believe we got away with that.
That was such a hard hit.
Yes, I did check the neighbor's mailbox.
It's fine.
I was really pushing my luck out there.
I kind of expected something bad to happen.
Without any kind of stability control and this much power, it really is hard to control
at those speeds.
We definitely could do more than 60 miles an hour.
We were very, very close and we had barely gotten above full throttle.
Overall, I think 60 miles an hour is very achievable and this thing feels very wild
on 4S.
I cannot wait to see what it feels like with some bigger tires and I am just so incredibly
impressed that it took that hit and survived.
There's a triple on the back.
Survived that too, no problem.
This thing is so durable.
There are a lot of cars that would have broken on that mailbox hit and this thing didn't
and it still feels awesome.
I'm barely hitting half throttle right now.
This has got a lot more in the tank.
Let's go for another double or a triple back on the back again.
This thing definitely has a quadruple in it, but I really want to save that for the big
tires, which we're probably going to do in a second.
Oh, right on the nose.
Got to live an unexpected durability test going on here.
This thing is handling it no problem whatsoever though.
See if we can stick it.
Oh, not quite on the tail.
It's about 45 degrees out here too, people.
So this thing is pretty brittle and it's still holding up absolutely fantastically.
Now when it comes to tire upgrades, our choices are kind of limited, at least with what I
have on hand.
Typically my go-to are these 2.2 trenchers, but because the Mini Kraton tires are already
kind of oversized for a Mini, they're about the same size.
We could do Mini XRT tires, but I don't really like these tires that much.
And given just how durable this thing is, I want to push it to its absolute limit, which
is why we're going to go with Omni Terminator tires.
These things are gigantic compared to the Stalkers, and I'm not even sure if the suspension
is going to be able to handle it, as we don't want the suspension to fully compress before
the chassis bottoms out, but it actually looks like there is enough suspension travel.
Now, these larger tires are going to put an insane amount of strain on the drivetrain.
So if this thing immediately breaks, it's not the car's fault.
However, everything does clear and it looks super mean, so let's see what this thing can
do.
Oh man, those tires are so big on this little car, but it looks really cool.
It's actually handling it fairly well too.
Let's see if it'll do a backflip.
Oh yeah, easy backflip.
I think this thing's going to be doing many backflips.
I'm kind of taking it easy right now, as I don't want to break it immediately.
I will say that these tires probably are not nearly as practical as the ones that come
on it, and it is harder to control with them on, but when did we think practical was good
in this game?
I think that might've been a quadruple.
Oh yeah, it does want to flip over pretty easily.
It also cogs pretty badly.
Overall, yes, these tires are too big, but let's see if we can get that quadruple jump
out of it.
That was four.
Man, guys, smashing into mailboxes, big quadruple backflip air with giant tires on it, 4S power.
This thing is an absolute tank.
I still haven't broken anything on it, and I really do love that strap adapter.
Prototypes for it are still being worked on, but I'm going to leave a link to the guy's
website down in the description.
When it's ready, I definitely recommend picking this up, because it's going to make the battery
tray a lot more versatile.
And speaking of versatile, this thing handles incredibly well.
It seems to take pretty much anything you want to give it, and the proof's in the pudding.
Oh, shoot.
This thing is durable, handles well, and is really awesome.
And YouTube thinks if you're awesome, you're going to enjoy one of these two videos.
