JOIN THE FAMILIA! The Latinos Next Door Channel: / thehomesteadnextdoor Mommy and Daughter Craft Channel: / @blondeandbonitacrafts2707 Instagram: @thelatinanextdoor
C O N T A C T Any questions, inquiries or collabs: [email protected]
💌 M A I L💌 The Latina Next Door, LLC 3372 Main Street No. 130 Pikeville, TN 37367
Some of the links above are affiliate links, however, all opinions are my own. I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Hey there, my name is Yami. I am your Latina next door. Welcome back to mi casa. Today I'm sharing
some beautiful yet simple DIYs that you can create for Valentine's Day. And whether or not
you like to decorate for Valentine's Day, there's going to be something here for you.
So for this first DIY, we're going to be using one of these tinsel hearts that you can find at
your local Dollar Tree. And the first thing you're going to do is you're going to remove
all of that tinsel. Then what you're going to do is get some inexpensive chalk paint
and paint the frame in white. You may need a couple coats. Next, you're going to use some
burlap ribbon. I got this one at Dollar Tree as well. And you're going to want to cut multiple
strips to fit horizontally as well as vertically on the wreath. Then you're going to start feeding
the ribbon through the grid in order to form a basket weave. You're going to wind up with
something that looks like this. All right, once you've got your basket weave the way you want it,
you're going to take the ribbon and you're going to take some hot glue and you're going to glue
those edges all the way around the heart securing that ribbon. Once you're done gluing the edges,
then you're going to want to cut off that excess. Next, you want to take some rose bushes. And I got
three different colors because I'm going for an ombre effect. These are also from Dollar Tree.
You're going to want to pull them off the stems. And then you're going to want to secure the little
green bud onto the petals so that they do not fall off. And then you're going to cut off that
little piece at the end so that it lies flat when you hot glue it all around the perimeter.
I started with the darkest roses on the bottom and then I worked my way up to the lighter roses
all the way up to the top where I use the white. Then after you've glued on all of your roses,
all you have to do is add some jute string to the very top so that you can hang it on your
wall or on your front door. And there you have it. So let's say you like the heart shape and you like
but you don't care for the basket weave. Well, Dollar Tree carries these heart-shaped
wreath forms as well. And we're going to use this for this DIY. So I'm going to be using some linen
ribbon as well as some rose bushes from Dollar Tree. And because this ribbon is a little bit too
wide, I am going to go down the ribbon and just cut it in half. Next, I'm just going to start
wrapping the wreath form with that ribbon. And I'm going to be hot gluing on occasion throughout,
not necessarily every single time I wrap it, but every once in a while just to make sure that I
keep that ribbon secured onto that wreath form. And I also like to evenly space out the ribbon
so that each section is about the same size. Now, in order to keep the centerpiece nice and clean,
I did cut out a smaller piece of ribbon and I attached it to the front like this. I cut out
a little insert in the front so that I can kind of spread it out on both sides and then wrap it
over the back. That way it's a nice little clean front peak to that heart. And then I continued to
wrap the wreath until I met the bottom area. Now, because I'm going to be adding the flowers to the
bottom, you don't need to cover that peak, but you can do so if you wish. And this time to give it a
different look, I decided to use the greenery as well as the roses. So I picked up the leaves first,
added them to the bottom of the wreath, and then I'm going to glue the flowers on top of them.
And here I did something similar where I added the lighter colored roses to the top and then use the
darker ones on the bottom. I also used some jute string in the back to hang it up and that is it
for this gorgeous wreath. Now let's say you're really not into pink, you're really not into
roses, but you still want to do something. So we are going to recreate this leafy heart wreath from
Grandin Road and it's so easy. You really don't need much for it except some greenery. Now, I'm
as well in order to create the form on some foam board. So if you don't have a heart-shaped wreath,
don't worry, just get you some form and draw a heart form on it. After I drew the initial heart,
I took some measuring tape and I just began to draw the same size line all the way around because
I needed to connect those ends of those lines in order to create the wreath form. So I'm just
going to go back and I'm going to draw around, kind of like connecting the dots, in order to
create that form. Then I'm going to come back with a box cutter and just cut out that form.
The great thing about this is that you can create a heart wreath as big or as small as you want.
All right, we want to get this wreath form a little bit more sturdy and we also want to hide
the fact that it is foam board. So what I'm going to do is I'm going to take some jute string or
jute rope, whatever you call it, and I'm going to start wrapping it around the entire foam form so
that it reinforces it as well as make it look a little bit more natural. And then I had these
eucalyptus stems from Dollar Tree as well as some larger ones from Walmart. And I like this
because both of them were a little bit different in tone and the ones from Walmart looked a little
bit higher end. So mixing and matching these together really looked beautiful. And I'm just
going to cut each and every one of these stems individually. After that's done, then we're going
to start adhering these little stems all the way around the wreath form and just kind of working
both of the different kinds together so that you get like the dual tone look of all of the leaves.
And I personally wanted this very full, so I'm placing them very closely together and also
filling any gaps that I might have along the way. And I'm just going to work my way around the entire
wreath. And then when I was done, I flipped it around and added this beautiful striped ribbon
to the back of it and just hot glued it. And because it's not that heavy, it's going to stand
the test of time. Honestly, I've never had an issue with this, but I did add a little bit of
pieces horizontally, as you can see, to reinforce it. And that is it. All right, so let's say you
like roses, but you don't care for a wreath. Not a problem. Let's knock off these Serena and Lily
vases in order to add a little bit more style to a flower arrangement. And if your goodwills are
anything similar to the ones that I've been in, there's always a ton of glass vases everywhere.
So you just need a couple of simple ones. However, these ones in particular, I do love because they're
a thicker glass. And these are also the same shape, despite being different sizes, which I think makes
it look even better because it looks like a set. Now, I did clean these very well with soap and
water and made sure they were completely dry. And then I started taping them off because I am going
to be spray painting them on the bottom portion to look like the ones from Serena and Lily.
You want to make sure you take your time with this and make sure that that tape is firmly on
your glass so that you can ensure that you have a crisp line. I added some rubbing alcohol real
quick and wiped it down to make sure that the glass had no residue at all. And then I began
to spray paint. I did start off with a primer just to make sure that I get really good adhesion on
that glass. And the key to doing this well is to do very light coats and several of them.
So you just want to go very light on it and not be heavy handed and just go left to right as you
see me doing here. And again, the lighter hand that you have, the better. Now you're going to
want to wait till your primer is completely dry before you go in with your actual spray paint.
And here I'm using like a glossy white. And as you can see, I'm applying it in the same manner.
I'm going very light handed, doing several coats, going side to side. This is going to get you the
most even coat and the most professional look. I let these dry overnight to make sure that the
paint was completely cured, and then I was very careful when removing it. And that is it. Now,
in order to make this look a little bit higher end and classier, you do want to get some nicer roses.
I would suggest perhaps at least going to Walmart, if not Hobby Lobby.
All right, so here's an idea for another tabletop arrangement. This one's a little
bit more involved, but it's really simple. I promise. First, you're going to get a ball,
like a plastic baseball from Dollar Tree, or you can also use a styrofoam ball for this.
Just make sure if it's a plastic one, you drill a hole in it because we're going to be inserting
a dowel. Now, we're going to be using those same roses that I used in the first two wreaths,
again from Dollar Tree. This time though, you're going to want to remove that green backing so
that it adheres better onto the ball. And because you're removing that backing, you're going to want
to glue the petals together so that they do not come apart. And that's what I'm doing here.
Now, you can make this a solid pink, a solid white, any color that you want. But again,
I'm going to go for the ombre look, so I'm doing white on top, the medium color in the middle,
and then the darker one on the bottom. Now, in order to make this look as nice as possible,
you're going to want to make sure you put these roses very close together so that they're nice
and full and you don't see the ball underneath. Just make sure that you don't glue over that
hole that you drilled earlier. For this stem, I'm just going to use an inexpensive dowel rod,
and I'm just staining it here. Then I'm going to use some hot glue to insert it and secure it in
place. I added more hot glue as well as another rose in order to cover that area. And then for
the base, you can use whatever you had on hand. I had this little Santa bucket that I added some
rope around, and I made it look like a basket. And then I just added some floral foam to the
of it, securing it with hot glue. I inserted the dowel, making a little hole with a pencil first,
and then I'm just going to go in and fill it in with some green moss so that you don't see
the floral foam underneath. You can leave as is, add a ribbon, or imagine creating two of these
to put on either end of a credenza. Now, let's say you wanted a little bit more rustic and a
little bit less pink, and something out of the box, literally. I had these four small canvas
pieces and I just took off the canvas. These are from Dollar Tree, you see them all the time.
And I thought I'd use the wood frames. Once I removed the canvas, I made sure to remove all of
the staples. Now, I did not want these holes to show, so I did take some wood filler and fill them
in, and then I went back in and sanded them. And once that was done, I took some wood glue and I
adhered them together in order to create a little box, or a lantern if you will. Now, the reason I
did this instead of using hot glue is because with hot glue, since it's so thick, sometimes you see
it between the seams, and I did not want to see it. So, once it was dry, I went back in with some
white chalk paint. Now, you can definitely leave it like this, but I did want to add a glaze to it.
I waited until it was completely dry before starting on the glaze, and I'm just applying
it with an old sock. You know, the ones that you just, for some reason, can't find the other pair
too. Those are great to have around in order to apply glazes like this. Now, using the same striped
ribbon that I used earlier for my greenery wreath, I'm going to use this one here to hang these cute
little grapevine hearts. I also got a dollar tree on all four sides, and I think this looks so
precious with a candle inside. All right, we're going to get real creative on this one, and we're
going to be using some leftover Christmas supplies. You heard that right, Christmas.
We're going to take some foam board again from Dollar Tree, and we're going to take a small heart.
They have tons of these at Dollar Tree, or you can just draw your own. I used this as a template,
and then I cut out that heart with some scissors. Now, much like that wreath that we created from
scratch earlier, we're also going to create a little one from scratch. I'm just using a sharpie
here and creating another one inside, and then I'm just going to cut it out. All right, so next,
you're going to take some berry stems from Dollar Tree. I'm sure you have some leftover,
and we're going to remove each stem individually, but then we're going to go a step further, and
we're going to cut down those little berries into little clusters, and then we're going to start
gluing them on that little heart shape. Now, in order to make this look the best as possible,
you're going to want to make sure that those little clusters are as close together as possible.
You're also going to want to add little berries along the inside perimeter as well as the outside
perimeter so that you hide any foam from those angles. Now, as you may already know, once you
pull those little berries apart, they do uncover the little white styrofoam pieces underneath,
so you're going to want to come back in with a nice bright red or any color of your choosing
and just color all over those areas, and then after that was dry, I came back in with some
Mod Podge in order to make it nice and glossy. Then, I had this frame that I've actually had for
a while, and I didn't know what to do with it because it had two holes on the top. I swear,
I did not make those holes, and I had painted it white, and here you see me distressing it.
Now, I thought this was a perfect opportunity in order to hang this little heart,
and as you can see here, I just got some inexpensive little jute string, and I hot glued
the back. Now, you can add more berries on the back of this if you have it somewhere where you
can see it from all angles. I'm just going to put it on a shelf so I don't need to worry about the
back end, but then I took those strings through those two holes that happened to be there,
and all I did was tie a bow in the center, and here's how it turned out.
Now, this next one's going to be a little bit different from all the other ones that you have
seen. I had this little plaque, and I didn't really know what to do with it, and I thought
this would be a perfect chance to do something unique for Valentine's. So, I had these IOD molds
that were little keys as well as little locks, and I thought, oh my gosh, key to the heart,
there you go, and I decided to use some air dry clay and create some. So, the first thing you want
to do is add a little bit of cornstarch so that your clay does not adhere to the mold, and then
after you work it in your hands, just start pressing it and then remove the excess off the back,
and yes, I have found that my Cricut spatula works really good for this. Now, the key was a little
tricky because it is nice and thin at the very end, but it worked out just fine. Now, the best
way to remove these once the molds are ready is to flip it over and then just kind of peel it off
of the mold, and then I just set it off to the side to dry, making sure that it was on a straight
surface, and did the same thing to the little lock where the key is supposed to go in. Now, once
they're nice and dry, they're going to be nice and solid, and they won't be flimsy like you saw.
I glued the lock piece on the center of the square, and then I began to paint it with like a
taupe color. If I remember correctly, I used wood glue for this. Now, I wasn't worried about painting
the keyhole completely because I was going to paint it with some rub and buff, which is exactly
what I did with the key, and then I came back and painted the little keyhole. After that, I took some
DIY clear wax and I sealed the entire thing, but I wanted it to have a little bit more dimension,
so I came in with my favorite white dust, sprinkled it all over, and then took my brush again and began
to spread it back and forth so I can get some nice dimension on my canvas. I wiped off any excess,
and then I came back in with a little bit of white wax and just kind of touched up and highlighted
the area around the keyhole. Next, I used a heart-shaped doily from Dollar Tree in order to trace
its shape onto the board. While doing that, I was making sure that the keyhole was on the center of
the doily, and then I used the shape that I traced as a guide to create a beautiful white rose heart
surrounding the keyhole. Now, once I made my way all the way around the heart, I came back and I took
the little key that I had created previously, and I decided to put it toward the bottom right of it,
securing it with some wood glue, and I just thought this was a sweet and unique little
Valentine's piece of decor. Now, if you're feeling a little adventurous, we're gonna take it to the
next level with some canvas painting. However, if you don't know how to paint, don't worry, I got you
because you're gonna be able to access what I'm painting as a printable, and you're gonna have a
couple of options in order to print it out so that you can use it in your home or gift it to someone else.
Now, all I did was add some white chalk paint to the base of it because I didn't like the color of the
canvas, and I wanted it to be bright white. And again, using a doily, I am creating the shape of
the heart towards the upper portion of it, kind of keeping it center but a little bit higher up.
Next, using some washi tape that I had on hand, I'm cutting it into small pieces because I am going
to be lining the interior portion of the heart with washi tape in order to protect it. Now, once
your heart shape is nice and taped up, you're just going to come in with some simple acrylic paint,
and you're going to start creating a different floral patterns. You don't have to be an expert
in painting. It's very simple here. I'm just creating some roses. They might not look like
roses right now, but you will see in the end. And honestly, I had never done this before. I just
started just adding more paint, making little buds, different kinds of flowers, using different
kinds of colors that kind of coordinated with each other. And the reason you want the tape
is because you want to be able to paint on the heart, but you want to get a nice crisp line to
outline your heart at the very end. And you'll see what I'm talking about. And this was so much fun
to do for the first time. I want to actually try it on a larger scale with different colors to see
how it turns out. Once everything was dry, I began to remove the tape, and I'm totally using another
Cricut tool here. Now, because I kept painting over the tape, now when I remove it, you see a nice
crisp heart shape. Now, for this being my very first time, I do love how it turned out. And I
was just very happy with it. Now, I know not everybody is going to try something as complex
as this. So what I did was I created digital images of this, and I uploaded them
onto my website. And I actually have two options. You can print it out as an 8x10 and use it as
artwork, or you can print it out as a card, and you can just fold over a regular piece of cardstock
and gift it to somebody. So I'll make sure to leave a link in my description box where you can
sign up for my free printables library, or the link for you to sign in if you've already subscribed
to download my free printables. And let's just be honest, sometimes we just have a whole bunch
of random stuff that we've bought, and we just don't know what to do with it. So for this one,
that is exactly what I'm doing. I had this random heart shape, again from Dollar Tree,
and all I'm going to do is paint it white. And then I had this frame. I had a picture frame,
and it broke apart. And this is like the inside guts of it. But I thought it was kind of cool,
and I didn't want to throw it away. So I figured, okay, let's figure something out with this.
And a spoiler alert, my mom actually loved this so much that she took it, and then she used it for a
couple years in her house. So I had all of these florals left over from previous arrangements,
and I figured I could use them. And you know how I do. I love to remove the buds from all of the
stems. And then after I did that, I began to adhere them onto the frame. Now I didn't have
enough for the entire wood frame, so I thought I would do it in two corners opposite each other,
of course. And I just began adding greenery, as well as the different florals that I had on hand.
And honestly, none of these florals went together. I was just trying to use up some of my stash that
I had on hand, and just create something out of it. Next, I wanted to hang the heart that I had
painted earlier. However, I wanted it to look a little bit nicer, so I did string some wooden
beads, and I kept them unfinished, just like the frame, in order to hang the heart on the center.
Now, I didn't actually hang it from the beads. I took some jute string, and I placed it in the
center of the two most center beads, and that's what I use in order to attach it to the frame.
Of course, you don't see it because the greenery is in front of it. Now, I left the heart blank,
but here I'm showing you a couple of options of what you can do with some decals, or some
hand painting yourself, if you just want to use this for general usage, or for Valentine's Day.
Now, I saved the easiest for last. Sometimes, you see these little bags at your Dollar Tree
for Valentine's Day, and I just happen to have these three little bottles in this little case,
and I thought it would just be totally nice to just put them in the bags. This is not permanent,
and you can change them up for other seasons. I do know I've seen these in the past for Christmas.
The next thing I did was I got this lamb's ear, and I believe this was probably from Walmart,
if I remember correctly. These are $0.99 apiece, and then I just added them to each of the bottles
for a little bit of greenery, and that's basically it for this. Sometimes, something like this that
you wouldn't normally think to use as decor adds just a little bit of charm to our pre-existing
items on our shelves, or on our table. Well, that's it for today's video. I hope you enjoyed
it. If you did, please make sure to give this video a thumbs up, and let me know in the comments
which one of these DIYs was your favorite. Make sure to subscribe if you haven't done so already,
and I'll be back here very soon with another video. Until then, adios!