💐💚Flowers and Crystals Bracelet Tutorial! 💐💚

Exquisite jewelry
18 followers
4 Video Views·Jan 28, 2026
Thank you for watching my video, as always I am extremely grateful for your support. Today I will be showing you how to make a Flowers and Crystal Bracelet
It is a simple pattern using Czech Flower and Fire polished beads
AI Generated·May contain errors
Hi everyone this is Gina. Today I'm going to show you how to make a little bead weaving project
with fire polished beads and Czech Hawaiian flower beads. And I do have all of this stuff on my
website if you'd like to get some. So I'll post links. If not you may be able to find something
similar in your stash and make this bracelet anyway. So and there are some alternatives to
the fire polished beads we'll discuss in the next section. I put a couple little dangles on the back
here as you can see. This just turned out really really cute. And I've designed it so that if it
flips around on your wrist it's okay. Everything's double-sided. The units we make in between are
double-sided. The flowers are double-sided. So if things flip around and move around that's okay.
It still looks just as pretty. So again there's what the clasping looks like. And let's go ahead
and discuss what it takes to make this particular bracelet. Okay for this tutorial today we're going
to be using some Czech fire polished beads four millimeter round. And we're going to be using some
Czech flower beads table cut. And then some seed beads. So to start with our seed beads these are
all Toho. I'm using an 8-0, 11-0, and 15-0. The 8-0 and 15-0 are galvanized permanent finished
starlight. The 11-0 that I have chosen is brown iris. And again it's Toho also. We're going to be
using in this particular tutorial I'm going I have chosen two colors of four millimeter fire polished
beads and the turquoise color. This is turquoise Picasso flower beads. So I'll show you what they
look like. They're really pretty. These are 10 millimeter. If I refer to them as 7 millimeter
in the video ignore me. They're 10 millimeter. I also have these teal ones which are 8 millimeter.
And they will work just as well. You'll just probably have to do perhaps one more unit
because your length will be a little shorter. But I have both of these on the website and I
have the fire polished beads if you want the colors that I have chosen. The four millimeter
fire polished beads that I have chosen they come in a strand of 50. And this one is twilight crystal.
I'm going to be using it. This one is prairie green. So for the tutorial I'm doing today I'm
using the prairie green the twilight crystal and the turquoise Picasso flower beads. If you
decide you want to do the teal these little orange teal fire polished beads will go really well with
this. So and there's other colors of course too. But you can also use a four millimeter
cuboid if you would like. So you could use a crystal clear. You can use all one color. You
don't have to do two like I'm doing. So you could also probably get away with a four millimeter
bicone on this also. So that you can kind of adjust your colors with what you have chosen
for the beads that you want to use. I'm also going to be using about an seven to eight millimeter
jump ring and a lobster claw clasp and two wire guardians for my clasping. I will be using a size
11 beading needle. You can also use a 12 and I'm going to be using six pound crystal fire line.
And that's what we're going to be using for this project today. I will post links in the
description box beneath the video player and also for the products and also for a video to show you
how to extend your fire line if you do not know how. You're going to put about four and a half
to five feet on to start with but you will need to extend. If you don't know how reference the
video link that will be in the description box beneath the video player. And go ahead and thread
your needle and let's get started. Okay we are going to start this project by picking up a four
millimeter fire polished bead and I'm starting with my prairie green. And then we're going to
pick up an 11-0 and 8-0 and an 11-0 and then another fire polished bead and then an 11-0, 8-0, 11-0.
And this is what you should have just like this. Now we're going to draw this to the end of the
thread and you don't have to leave a long tail but do leave enough to tie a knot with.
And then we are just going to pick up that first fire polished bead on the tail side and go through
it just like this. Then we're going to pull our thread through hold on to your tail and your fire
polished bead. Draw your thread through until you draw it in a little circle like this. Then we're
going to sew all the way around these beads. So I'm going to go through these three seed beads here
hold on to it and then I'm going to go through the fire polished bead and I'm putting my thumb
and finger over it just to make sure I don't pull it completely off the thread. And then I'm going
through these three seed beads. Now I'm right where my tail thread and my working thread meet
so I'm going to put my tail thread over my working or excuse me my working thread over my tail thread
and then I'm going to draw the tail thread through twice and pull a knot right between the 11-0
and the fire polished bead. Then I'm going to cut this down just a little bit because I don't want
it to get in my way but I don't want it to slip yet so I'm still leaving some tail. Then I'm going
to go ahead and sew through the fire polished bead here right next to where I'm coming out.
Then I'm going to go through the next 11-0 and 8-0 and I'm going to exit the 8-0 just like this.
Now I'm going to embellish with my other color of fire polish. Of course you can do this all
excuse me in one color that will be fine too. Pick up a fire polished bead a 15-0 a fire polished
bead and a 15-0. We're coming out of this side of this 8-0 we're going to go into the same side
of the opposite 8-0. So let me get this arranged again since I dropped it and we're going to go
directly across and go into this 8-0 on this side. Then I'm just going to hold on to the whole piece
and pull this down. Push the new beads on top of the previous beads and give a little tug so that
it draws down nicely over the top. It won't be tight yet but it will be when we do our next step
here. So just pull this down and then pick up a 15-0 and go directly into the fire polished bead
just like this. Then I'm going to hold on to it pull my thread through and give a tug so it all
tightens up and this is what I have. I need to attach the other side to the 8-0 so I'll pick up
another 15-0 and I will go into the 8-0 on the opposite side from which I started. Pull this down
just like this. Now I'm going to turn it over I'm coming out of the 8-0 we're going to do the same
thing on the opposite side here. So we're going to pick up a 15-0 and one of our fire polished beads
and a 15-0 and we're going to go directly across into the 8-0 right here and pull this down
and just rearrange so that we can attach the other side of the fire polished bead. So pick
up another 15-0 go directly into the fire polished bead and now we're coming out of the fire polished
bead and we need to attach to the 8-0 on this side. So pick up another 15-0 and attach. The
neighbors are making a whole lot of noise next door and so I hope that's not too obnoxious but
not a lot I can do about that. And there you have it right there that's your first unit.
We're going to go ahead and put on our clasping or just our wire guardian. This will be the side
that we'll attach the jump ring to. So we'll start with just the wire guardian. So we're coming out
of the 8-0 seed bead we're going to pick up our wire guardian and just bring it straight down
to the 8-0. I'm going to turn it over and align it just like this and then I'm going to go into
the other side of the fire of the wire guardian and I'm just going to hold on to it between my
thumb and my finger and I'm going to pull the thread down until I can feel it kind of pop into
the top of that wire guardian and then I'm going to go into the 8-0 seed bead from this side
trying to avoid that 11-0 on the other side. We just want to attach to the 8-0 just like this.
Now we're going to sew through this a couple of times. So we'll just go up through the wire
guardian hold on to it again and pull that down make sure your thread is going through there
properly and then I'm going to go through the other side hold on to the wire guardian feel the
thread slide through until it pops down into that wire guardian and then I'm going to go through the
8-0 seed bead. You can go through the 11-0 also this time if you would like. Pull this through
and because there's a wire guardian I'm just sewing through twice if you would like to not go
through that 11-0 and sew through a couple more times that is fine too. Now I'm going to go up
through this four millimeter fire polished bead because I'm coming out of the 11-0 here and then
I'm going to go into this 11-0 and this 8-0 on this side. Okay so this is what I have and that's
my first little cluster unit. Now I'm going to cut this down even a little more
and I don't have to sew through that again so I'm just going to go ahead and melt it in just get it
out of my way. So you get your flame close don't light it on fire just get it close and let it
melt in and then we are going to attach a flower now. So we're coming out of this 8-0 we're going
to pick up an 11-0 and then we're going to pick up a flower go through it bring this down
then I am going to pick up an 11-0 8-0 11-0 and go back through the flower. I'm just going to hold
on to the flower and pull these beads up. Now this likes to twist and do weird things you need to get
these beads laying in a little picot like this and then we need to pick up another 11-0 and go
through the opposite side of the 8-0 that we're attaching to and again it likes to twist so just
untwist it then we're going to sew through this again just to straighten it up. So I'm going to
go down through this 11-0 into the flower and then straighten up the bottom here and go through
one of the 11-0s and pull this down and I know my fingers are in the way I'll get them out of the
way so you can see what I just did. So I'm just straightening everything up just like that and
now I'm coming out of this 11-0 I'm going to go into the 8-0 and sew back through the other side
so go through this 11-0 and up through the flower and up through the 11-0 on this side
pull this down straighten it up the best you can and then we're going to go through the 8-0 here
and back down through the flower now that it's secure we need to get to the bottom
so we're going to go through the flower and I'm going to try to go through this 11-0 here also
if I cannot I'll just go through the flower and then I'll go through the 11-0
there we go it just it's so wobbly let me turn this so I can get to it I'll go through this 11-0
there we go gets a little better when you have a little bit more length but
when you don't it's kind of wobbly now I'm coming up through the 8-0 and now I have my first two
units so now I'm going to start another unit like this one but this time I'm going to start with
twilight color I'm going to pick up an 11-0 and the fire polished bead
and then I'm going to pick up an 11-0 8-0 11-0 and fire polished bead come here and then an 11-0
I'll show you what I have on my needle these beads do not want me to pick them up today I don't know
what's up with that okay so we've got 11-0 fire polished bead 11-0 8-0 11-0 fire polished bead
and 11-0 just like this we're going to drop this down and we're going to come back through this 8-0
we're attaching to just like that now we're going to sew back through all of these beads
and come into the 8-0 right here now we're going to embellish the top and this time I'm going to
embellish with my prairie green color so I'm going to pick up a 15-0 and then I'm going to
pick up a fire polished bead and a 15-0 and we're just going to go straight across into the opposite
8-0 just like this pull these down and over the top tighten it the best you can then I'm going to
pick up a 15-0 and I'm going to go through the fire polished bead hold on to it and now I can tug
and get them nice and tight and then I'm going to go I'm going to pick up a 15-0 and go back
through this 8-0 right here again make sure the 15-0 goes down into place pull everything tight
that one is it twisted now it's just being weird okay so now I have that all secure I turn my piece
over and I'm going to do the other side we're doing both sides so that if this twists as it's
on your wrist it won't matter now we're going to pick up a 15-0 a fire polished bead and a 15-0
we're going to go directly across into the 8-0 opposite the one you're coming out of
but on the same side you're coming out pull it over the top and pull it down now we have to
attach the other half of the bead so we pick up a 15-0 go back through the fire polished bead
pick up a 15-0 and go back through the 8-0 right here pull this down and tighten it now we're going
to sew through these beads on the side to get back down to the 8-0 so I'm just going to turn
it so I can get to it better and I'm going to go through the 11-0 fire polish 11-0 and you may have
taken one at a time sometimes you can get two sometimes you can get all three just depends
just get down through all three of those beads now I'm going to go through the 8-0 right here
and let's attach another flower then we can go to length because this is going to be
really repetitious so we're going to pick up an 11-0 and a flower okay where's the hole
there it is let's drop it down then you're going to pick up an 11-0 an 8-0 and an 11-0
and then you're going to go through the flower pull these beads down and then adjust them
untwist them adjust them so they sit with the 8-0 right on top of the 11-0s
just like that I'm going to pull this again because it's too far away from my other 8-0
so you want to make sure you don't have any slack on this side either then you're going
to pick up an 11-0 and you're going to go through the 8-0 on the opposite side from
what you started pull this down and into place just like that now we're going to sew back through
the entire unit so that we can secure it so I'm going to go from the 8-0 into the 11-0 into the
flower and then I'm coming out of the 11-0 on the bottom here too so I will pull this through
and arrange it and then we're going to go through the 8-0 now these like to twist and that's okay
that's why we're embellishing both sides so when it's on your wrist if the flowers twist they're
double-sided it doesn't matter and your units of fire polish are double-sided but as you're
making it you just have to keep straightening it out because it wants to twist we're coming
out of this 8-0 we're going to go down into this 11-0 and then into the flower and we want to go
into the 11-0 on this side so I'm just coming up through the flower and then I'm going to go
through this 11-0 and then I'm going to go through the 8-0 that I'm attaching to now I am going to
sew back down through the 11-0 the 11-0 flower 11-0 and then into the 8-0 so we'll go down into
this 11-0 into the flower into the well did I get an 11-0 nope so we'll go into this 11-0 now
and usually you will have to do it separately so just position it on your flower so you can
get through it get through it and then reposition it and go through the 8-0 just like that
then we're going to do another unit of our clusters so let's do one more of those
and then we'll just go to length off camera so we have to pick up an 11-0 and that one's
kind of weird let me pick up it 11-0 fire polish and then 11-0 8-0 11-0 fire polish
and 11-0 so again this is what you have 11-0 fire polish 11-0 8-0 11-0 fire polish and 11-0
and I'm just alternating my colors as I do this since I did the twilight on the outside on that
one I am going to do the prairie green on the outside on this one and again you can do it all
one color doesn't matter and we're bringing this down into a circle and then we are going to go
through the 11-0 fire polish 11-0 then I'll go through this 8-0 and again 11-0 fire polish 11-0
I'll go up through this 8-0 and I will begin embellishing the top of this so I will pick up a
my thread is just being really weird hang on a second there we go so I'm going to pick up a 15-0
then I'm going to pick up my opposite my other color of fire polish and a 15-0 and my kids are
coming home and the three-year-old always has to push the doorbell and it's going to be very loud
in just a second I'm sorry guys they're just really obnoxious then we're going to go through
the 8-0 here there's the stomping of the child's feet my son and all right now we're going to pick
up a 15-0 and we're going to go through the fire polish bead and then we're going to pick up another
15-0 and go through the 8-0 we're going to turn this over and we're going to pick up a 15-0
a fire polish bead and a 15-0 and we're going to go directly across into the 8-0
pull this over the top tighten it pick up a 15-0 go through the fire polish bead
and then we're going to pick up a 15-0 and go through the 8-0 right here at this point
you can tighten your thread make sure everything looks good then we're going to sew the down
through the 11-0 fire polish 11-0 and into the 8-0 so we can start a flower unit now if you need
to go ahead and back up the video and watch a couple of times until you get the pattern down
and from this point we will continue off camera and this is what it looks like until you have
eight fire polish units and seven of your flower units so 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
i could have just added those together but my brain isn't working so 15 units total and this
is going to make about a seven and a half inch bracelet possibly a little longer i will measure
it at this point we can measure it and see how far we are here remember we're going to have a
jump ring here so i'm going to give a little length there so this is probably going to be
about a seven and a half maybe a little longer bracelet if you want it to be shorter then you
can reduce your units but you could attach to your flower unit if you would like but i like to try to
have the same units on either side for symmetry but you can arrange it however it will work best
for you to get the length that you need now i'm coming out of the 8-0 on the very last unit here
and i am going to attach this wire guardian with my um with my lobster claw attached to it if i can
so what i'm going to do is i'm going to go up through this wire guardian and this is always
kind of clumsy to do so i hope i don't look too weird now i'm going to go through the clasp and
try to stay centered in that wire guardian keep my thread inside the top and then i'm going to go
through this side so i know i'm really far away let me get closer here so i'm just sewing through
the wire guardian and just bringing it down like this so now this is what i have i'm going to go
through this 8-0 here on the opposite side that we're attaching to like this now i'm going to sew
up through this a couple of times you just have to be very careful that you can keep your thread
inside that wire guardian as you do this so we're going to go up through the side and what i mean by
inside the wire guardian is the divot on the top here so we're going to go through gently and i'm
going to hold on to it and see if i can kind of feel it pop in there and then i'm going to go
through this side the wire guardian is not closed all the way on this little tube side there we go
caught my thread there we go got it fixed now i'm going to do it one more time and then we'll
knot this off so let's see if i can do this gracefully one more time and you can see i'm
just going really slow so that i can manage my thread as i do this and this way i won't get the
extra length of a jump ring attaching to the wire guardian and my clasp i can just do it like this
okay now i'm coming out of the 8-0 i'm going to go down into this 11-0 here and the fire
polished bead like this then i'm going to go into this 11-0 and 8-0 here and right on the second
unit where the 11-0 comes through the 8-0 and into the or where the thread comes from the 11-0 to the
8-0 i'm going underneath that i'm going to try to arrange my thread so that the loop stays right
between those two beads and i'm going to draw a little knot down and then i'm going to go into
this 11-0 and flower and i've come diagonal through the 11-0 underneath and now i can tie another knot
between this 11-0 and 8-0 trying to keep my thread right where i want it tie a knot then i'm just
going to go through this 8-0 and 11-0 here and down through the side of this bead and i think
i'll cut my thread off here and melt it in and so i've just left a bit of a tag here and i'm just
going to melt this in tuck it up in that fire polished bead like that and now if your bracelet
rotates spins whatever it doesn't matter it's designed to do that it doesn't matter which side
your um clasping is on either because it's going to be able to move around
however and now i'm just going to put a little um jump ring on the other side here so i've got
my jump ring here's the opening this is a pretty heavy jump ring so that it will take the stress
of opening or being the clasping so i've opened it by twisting it open i'm going to put it onto
the wire guardian and then i'm just going to close it twisting it back shut here and this one doesn't
close very well let's see there we go okay now we can make a little decoration we could take one of
and put it i think i'll do that i'm going to get a um head pin and we're going to make a
little bobble for the end here and i'll be right back okay so i just grabbed a little
head pin a little ball head pin and i'm going to pop the flower onto it
and i'm going to place my pliers my round nose pliers right on top of the flower here
then i'm going to push the wire over the back portion of the plier as i hold the plier flat
then i'm going to turn the plier up and down like this and bring the wire over the top and about
three quarters of the way around i'm going to turn my plier flat again and draw that wire underneath
the plier just like this now i'm going to grab my flat nose pliers and i'm just going to hold
on to that little loop i'm going to switch my hands so now the wire is underneath the wire
that's going down into the flower and i'm going to begin to turn some coils around that wire with
my excess wire until i tighten the flower onto the wire and that's pretty good so let me find
my flush cutters i wasn't expecting to do this so i don't have anything prepared but i think it'd
be a good little addition and now i've cut that excess off and i'm going to tuck it in and now
let me tuck that in a little better and now i'm just going to open this jump ring
and pop this flower on here that was a gold um colored head pin however i twist so tight that
you can kind of see the copper color coming through oh well okay so now i'm just going
to open this back up just twist it open close it or don't close it yet drop your flower on
and then close it i'm sorry guys i have been struggling with catching a cold and being low
energy for about three weeks now and my brain just is not really working so there we go and now i can
attach this here and we'll see how cute it looks i'll put it on in the intro so you can see what
it looks like on but i think it turns out really cute we can put a couple flowers on there to make
one longer than the other so like i could put a head pin with one of these on here and then you
know make one a little longer too which i might do off camera it would be the same process just
you know it might make it cuter to have even one more flower there but that's what that looks like
i hope you enjoyed this tutorial and we'll see you in the next one bye
