Full Narrated Glassblowing Process - Making A Simple Vase

Art Creation
8 followers
Hey everybody, welcome back to the studio. In today's video we're going to be making one of
our bud vases for you. It's a very simple form but it's much more complex than it looks and I'll be
breaking down the whole process for you. So let's go ahead and head to the studio we can go ahead
and get started. So today's piece involves us using cane. So the first thing we have to do is
we have to create the cane and we're going to go through a process called pulling cane.
When we're pulling cane we basically take glass color which comes in the form of these rods right
and we're going to stretch it across the room to create these kind of long striations and lines.
You can pull cane in many different ways. You can twist it or just do basic simple cane. Today
we're pulling what's called veiled cane. So we're going to place our color bars into this pickup
oven and then we'll preheat it to about a thousand degrees. The glass will eventually get much hotter
than that but we have to preheat it to that kind of lower temperature so that when we move it over
to the bigger oven nothing cracks. So now I've got a solid pipe in my hand and I'm going to get a
small bit of glass out of our furnace right here. This furnace is 2000 degrees on the inside. It's
2160 degrees is what it's set to and it holds about 700 pounds of clear molten glass. The
furnace houses exclusively the clear glass so we add the colors after we come out of the furnace
with our clear. I'm going to use that little bit of glass kind of as like a glue bit and we're
going to put that right on the tip of one of those rods now that they're nice and hot and then we're
going to transfer it over to our bigger oven the glory hole so that it can get really hot and start
to become molten. That's hilarious. So today we're pulling white with lagoon on top of it so the white is
going to be our core and then we're going to add that lagoon which is kind of like a greenish blue
color on the outside. The white color is very stiff compared to the darker color right. Glass absorbs
light just like everything else in life right. If you're going on a run and you know it's hot outside
you want to wear a white t-shirt so that it reflects the light instead of a black t-shirt
you'll get a lot hotter because black absorbs the light much faster than the white does. So we use
the white as a core so that we can have some stability whenever we pull it but then we also
will wrap that color in the lagoon the darker one. We want to take this glass the white color and
we're going to stab it right onto the iron right. I don't want there to be any separation between the
white and my pipe so we just stab it straight on right. Sometimes whenever we pull it we pull it
such a far distance that the clear that's in between if I was to set this up a different way
just with like a bar that had clear on it that was attached to the white the clear would stretch
and stretch and stretch so it's not what we want we want the white to be really what stretches so
we just attach it straight to the iron. So this is my brother Luke he's going to get a little bit of
glass out of the furnace on a smaller pipe and then he's going to pick up that lagoon color.
We're going to start to prep it so that we can wrap it around that white. Now that's the one you
picked huh. So right up here is where the temperature kind of matters in our coordination right.
I want my white to be very very stiff and I want his color to be very very hot so he's going to
take a lot of heats and I'm going to take a few less heats we'll really start to let it cool down
after I shape it into the right shape and that way I have a nice stable base to be able to wrap
that color around I don't want them both to be really hot. Okay I'm going to take a flash
find an arctic crap show and do that stuff travel youtube con. All right so now I think we have our
his glass was a little bit colder than I wanted it which is why we have that kind of big chunk in
the middle and that's completely okay totally fixable but we're going to wrap it around the
middle of my glass and then here in a moment I'm going to stretch it across the white so that it
kind of looks like a hot dog you know it's what it always reminds me of but we're basically just
going to try to really sandwich that white right in between the two colors. This is also one reason
that I really want my core the white part to be really cold right is because I'm pushing around
that darker color and the more that I heat it up the more the middle is going to just going to
want to move so I wouldn't have any stability if I had let it get really hot so I only have a small
window of time to be able to stretch that glass all the way across the white without the white
heating up and just flopping around on me. So we've got everything kind of assembled correctly
everything's right around the same temperature and now we're going to coat it in another layer
of clear glass out of the furnace. Whenever we get glass out of the furnace we call it gathering so
right now I'm gathering a little bit of glass and the only thing that I can kind of liken it to is
if you were going to take like a toothpick and try to collect honey on the tip of it that's that's
kind of the only comparison that I can think of. So you can see here that the outside layer is very
very hot the inside is much colder compared to that so we're letting all of the layers kind of
even out before we gather out of the furnace we make sure that the core of glass that we're sticking
into it is nice and cold so it doesn't just collapse on us when we stick it into the furnace
and now while it's nice and hot I can really manipulate it with my newspaper tool this tool
is about 12 sheets of newspaper folded up and soaked in water and from here we're kind of just
prepping it for our big pull right so I'm going to use my marvering table this thick metal table
right here to cool the glass down as well as just shape it up so I'm trying to make it into a nice
cylinder kind of a tapered cylinder to the you know you can see that taper right around where
the pipe goes into it but that's the plan we're gonna smush it down a little bit and really turn
it into a nice cylinder so that I can then stretch it across the whole studio
so we're getting pretty close to our desired shape and now my brother is going to go get
another layer of glass out of the furnace which this is going to be used as a post so he's going
to come over to the same marvering table and he's just going to flatten it out right here with
gravity it's a pretty simple thing to do but we basically just want a nice little solid post so
that I can stab the glass onto it and then we'll be able to stretch it using that as leverage
the tip of the glass gets really hot sometimes almost too hot so we dip it in water right before
the pull we'll do it right here too and then I'll stab it onto that post that my brother made
and we'll be able to stretch it onto those wooden ladders that we have on the floor
so when you do that first initial pull you're basically just trying to decide the diameter
right the middle part of it freezes up much faster than the areas that are thicker and they
stay nice and hot so I can pull it to a certain diameter and then in the moment I need to be able
to realize that that's how big I want it to be and then I pass it to my brother and I start to
walk away to really thin out the rest of it we can go down all right so that went really well
I really enjoy pulling cane and using cane in my work so this is something that I've done
quite a few times but I really enjoy just going through the process of making the materials it's
half the fun for me so now that we have our long length of cane we can chop it up into smaller
segments and then we can take those we'll lay them on a pastorelli plate which is basically
just like a ceramic plate and then we can roll it up onto a blow pipe and we'll be able to make
our base with it people always ask like can you buy the cane do you have to make it you really
want to make it yourself at least in my opinion because you can make it in many different ways
if I want it to be thicker if I want it to be more saturated with color there are lots of variables
to go through so in my opinion always make your cane you know it's part of the craft you got to
so we preheated the plate that we put it on it's probably around same thing as before about a
thousand degrees and we're going to let all of this kind of heat up before we put it into the
glory hole so that it can start to become molten so my brother's going to take a few heats on this
and all of those canes will start to really fuse together and create a small plate now while he
does that I'm going to make what's called a collar so I have a hollow pipe this time this is a blow
pipe and I'm going to get a small bit of glass on the end and I'm going to basically create like a
ring on the tip of my blow pipe you'll see me come out I'm going to hold it vertical and let all the
glass kind of fall back onto the pipe and then you're going to see me blow a bubble straight
through the pipe you'll see the small bubble come out here in just a second so we have our thin
bubble and we're going to put it back into the furnace all that's going to melt away and then
we can have the whole of the blow pipe exposed on the end which creates that kind of ring or like a
collar around the tip of the blow pipe which is exactly what we want so the glass is really hot
right now and I have a small amount of time to manipulate it to the correct size so that I can
take this collar and roll up all those canes into a nice cylinder around it and that is basically
what's going to give us our pattern in the end so you can see Luke has the canes pretty hot and he's
going to push these together with his tweezers so that we know that everything is nice and fused
together there's no gaps it's not going to break or anything whenever I try to roll it up and you'll
see him flip the plate around quite a few times because the burner in our glory hole is only on
one side so you have to make sure it's evenly heated throughout the whole thing so now I'm just
making sure that it's the right size and we're going to use that pie divider which is that kind
of v-shaped thing on the table to my right it takes the length of the canes and then divides
it by pi to give me the size of the circumference that I need my collar to be and now everything's
the right temperature so we'll just roll it up all right so that was great that went really smoothly
and now we just have a small gap where the two ends are supposed to come together so I'm going
to put the tips of these together and we're going to make sure that there's no other gaps in between
any of the other canes and make sure it's nice and solid last night I made some of these models
yeah that's why I wanted to make one today I had I really enjoyed them and I made them solo
I'm taking a dive he's playing wow Tim's a die-hard wow fan
when did you see him he was playing well the other day he has a torn uh
I know exactly homie yeah
all right so everything's fused together we're nice and hot and now I'm going to use my jacks
to do what we call a termination so I'm using the blades on these jacks to be able to make a
small incision right at the end of the canes and it's basically going to cut off that open cylinder
so now it's encapsulated which basically creates a bubble in the middle and that's the main reason
that I had to make sure that there was no glass over the tip of my pipe too when I was making my
collar right is because now that everything's encapsulated I can blow through my pipe and it
will inflate the glass these canes have lots of grooves on the outside of them right so what we're
doing now is I'm trying to smooth out the outside so that we can prep it to go back in and get
another layer of glass on top of it I don't want there to be any ridges or divots or dents in it
because when I plunge this back into that 2000 degree pool of molten glass inside of the furnace
whenever I turn it it's going to pick up bubbles on any area that's not smooth so
before we gather we always make sure that the surface is as smooth as it can be
so we're going to go ahead and get that next layer of clear out of the furnace
and you'll notice here in a second I'm going to do something a little different this is what we call
a strip gather so I get a lot of glass out of the furnace I hold the pipe vertically
and we let any extra glass just kind of strip off so this way I can kind of pick how much glass I
really want to be on there in the end so on this gather I only want there to be a very thin layer
of glass we'll get another gather a little bit later but this one is basically setting up our
pattern so from here on we're basically just getting ready to spin these canes the vase we're
making today is going to have some very very tight lines that basically create a really nice spiral
so now I'm using my jacks to put a small handle on the bottom I'm just going to put a small
incision here and in a moment you're going to see me dunk this in the water a few times and
we'll get ready to use this as a handle to twist the rest of the glass with
don't be me and asking mine or me or mine for nothing
so the handle is nice and cold I've made sure the back area is really hot so now I can grab
onto it and twist and I'll have my brother Luke blow through the pipe to inflate it as well
so we got a really nice twist out of it that looks great and now I'm going to use my jacks
to terminate the part on the end that doesn't exactly line up with the pattern of the rest of it
thank you there we go all right and now we've basically created our pattern right so we're
pretty far into the process I would say after we pulled cane and now that we're actually here
we're probably about 40 minutes in maybe a little bit more so you know this stuff can take a little
bit longer than it seems you know a lot of it is really about setting up our pattern and what we
want to do with all of our colors and from now on we're basically just blowing glass so we're
going to create our final form now so now we're going to go ahead and take that last gather just
a little bit more information about the furnace while I'm gathering stays on 24-7 so anyone can
come in all the time and blow glass whenever they want and it's been on for about the last five
years so I think it's a really cool piece of machinery and with these strip gathers we can
basically throw all of this clear glass back in the furnace so once we fill this bucket up of
clear glass we'll just throw it back in and it'll melt and we can use it to make more work
so now we have that last gather and I'm going to use this wooden tool which is called a block
to really smooth out the outside this tool lives its whole life in water it's made out
of cherry or apple wood and it really helps to cool down the outside while the inside starts to heat up
so now we can start to inflate the piece to make our final shape
so I'm going to use my newspaper tool to cool down the bottom and I'm going to have my brother
blow into it so we start to really inflate the center area a little harder reached in and I
reached in too closely to the door and dragged my arm across the corner so this vase kind of looks
like a bottle before it turns into its final shape so what we're going to do here in just a
moment is we're going to prep it so that we can pull the neck on the piece that's kind of the
term of the move that we're going to do so I'm going to heat up the back area and then here in
a moment you're going to see me take my jacks make a small incision and kind of pull away to
create a long neck we're getting another dog too we got a king like first thing yeah like a small
room too it's like it fits right we're like light air on pause for it again I couldn't imagine
blow again all right so that went really well that move can kind of go sideways very easily
you know if I don't pull the right time if I let it fall off center it kind of corkscrews on me so
there's a lot of things that have to go right so now while everything's still hot I'm going to put
in our jack line which is basically a small incision right off the tip of the pipe and that's
going to be where we disconnect it from this one once we transfer it to a different pipe so we're
basically deciding the line that it's going to break on once we do our transfer a little later
in the process and now I can use my newspaper tool to manipulate the bubble to the end shape
that I kind of want it to be just the bottom half we're not going to worry about the neck
right there I'm just going to worry about inflating that kind of spherical area to be
just the right size and then here in a moment you'll see me take a wooden paddle and we'll
to put the bottom on it oh hell yeah dude that's the name of the game
you can blow blow blow off stop blow again lightly uh just a regular dome punty is fine
you can go ahead and grab it go ahead and grab it trim it now we're going to get ready for that
transfer that I was talking about before right so my brother has a solid pipe in his hand with
a small bit of glass on the tip this is what we call a punty so he's going to cone it up so it
has a nice little point on it and then here in just a moment I'm going to stab this onto the
bottom as symmetrically kind of in the middle as I can kind of right in the middle which that
went really well and now I'm going to apply a little bit of water once it's cooled down a
little bit I'll apply water to the area that I want it to break from and then we'll have it flipped
over and transfer it onto the new pipe and now all I have to do is give the pipe a little tap
and we're good to go you can actually flash it so that went really well you know the punty
transfer can kind of be an anxious moment in the studio right if things get too cold or they're too
hot you know if things don't you know get stabbed on or put in the right place it's just a little
stressful so that went really well and now I have a small amount of time to make sure that the bottom
is nice and flat and we can start to heat up the rest of the piece so that we can start to do the
final manipulations so this move I'm about to do is called trimming so there's some thick glass
right around the area that we broke it off on and I want to get rid of all that I want this to have
a nice thin lip on it so I heated it up a lot and I'm going to use my tweezers to really kind of
pull it out and now we'll use our jacks put in another jack line just like before and I'll be
able to tap off that extra glass here in just a moment there's a few different ways to trim pieces
and get rid of that extra glass this one is called the jack and crack I just needed to get rid of
um is Cory around here can you tap this blue thank you all right so that was great you know
if my punty's too cold in that moment it'll really break so you have to make sure everything
is just the right temperature before you go for that final move and now we've heated up that area
that we just broke off and I can start to open it up to the final shape so you don't eat breakfast
before you come here no no actually did an awesome thing where it did it got a yeah okay we'll do that
go on again sorry I just want a better angle that's great all right that's it all right and
those last few moves we're basically done with the piece you know the last thing we have to do
is we just need to disconnect it from the pipe and we'll transport it to our annealer so that
it can cool overnight so now we just have to add a little bit of water to the tip of the connection
point being very careful not to get any water onto the bottom of the piece this just helps it want to
really disconnect from the pipe we're going to knock it off into my brother's tongs tap the pipe
a few times we'll take a small torch and get rid of any sharp spots from the disconnection and then
we can take it and put it in our annealer and we're all done I think there's room on the left
but it's like the way left yeah yeah that's fine it's fine perfect and here's our final product
you know I love these little vases they're so simplistic they're so pretty they're just
fantastic I love making them and guys if you're interested in purchasing one of these you know
the holiday season's right around the corner you can check out the description box down below we've
got a link to them we have them in a few different colors as well and check out our other social media
platforms you know we've been doing a lot of twitch streams lately so check those out if you're
into live glassblowing and thanks so much for hanging out with me today you guys be safe out
there we'll catch you in the next one
