Hey everybody, how you doing? I just wanted to explain a few things. We're just doing a little
bit of a van update. So we did our conversion and now what I've done is we've gone out we've
actually bought a 100 watt solar panel which is going to be awesome and I'm going to install that
on the roof today. So I'll show you how we do that and just what we did. So some of the things I did
with this is it's a 100 watt panel. It's a small one. It's only 20 inches by I think it's 48.
So it's one of the smallest ones I can get which is perfect because it fits on my roof with my
tubing and also our awning so it just fits perfect in between. So I had to do some measurements and
everything but it just died. Yeah so this one is just awesome little package and we'll give you
the description and everything for it. And then I bought these brackets separately that you have to
get and they're for the that style. It's a NuPower. NuPower solar panel 100 watt so it's it's pretty
cool. Give us lots of power so the way we do that we'll sort of walk through that step by step but
then what I also did for it is I went to buy an extension cable for it itself. This is a 10 foot
extension cable and this will allow me to run it from the roof down inside and I'll show you how
I'm going to be doing that later but what I'm going to be doing actually come over here honey
I'll sort of explain it to them. So basically with the solar panel is it just hooks up
it's really easy so you just hook the male and female connectors to here it's going to be at
the back I'm going to run it down the way I'm going to do it I'm just going to run it down here
I was going to go through the roof at first but then I yesterday I sort of did some looking around
and find out that I can actually run it down here run it back through behind our door which is a gap
all the way down inside because there's struts on the inside so I've got room to run my wire all
the way down here my light I'm going to pull out and I found there's a hole already inside going
inside the vehicle through here so I can go down and through and then I've already drilled a hole
in the back here and I've already ran our fan one but I'll run the the other wire from the solar
panel here which then plugs into our battery power which is just awesome it's cool everything
comes through here so it's just it's gonna be really good for us so we'll just sort of do a
step-by-step video on how I did that once I'm done and then the other thing we're going to do today
is we're going to do our fan so what I bought is instead of a max air huge fan because we just have
our van I bought a six inch fan which looks really cool so the nice thing about this is
it'll just give us enough air inside to circulate and we don't have to worry about having windows
open at nighttime and all that stuff the bugs or anything but this will give us the circulation
that we need to get some air through and so what I did is I pre-drilled I did some work yesterday
but what I did do is I made a template and this is just on the other rim which is the covering on
the inside of the van and what I did is I took the template and drew it and it's the outside
of or the inside of your fan diameter for the hole so what I did is I took that I put it on
the roof where I wanted it I drew then in the center because I drilled a hole right through
but what that allowed me to do is on the inside in here because I had my template I just drew
with the center hole I just took it put it up I put a plug in to hold it in place
and then I drew my my marker on the outside and then I just cut off the roof with a x-acto knife
so this is actually inside of the van roof covering and it's so simple to cut I couldn't
believe it it's like um the outside is I don't know it's three parts but I thought it was cardboard
and it's not it's like a nylon um cardboard mixture so it's a little strong it's very hard
to bend and very very strong but uh easy to cut so I cut that and I pre-wired everything so what I
did is I already ran my wiring which goes through my roof down behind uh around the window here
and then down through the bottom I just traced it in behind everything and I managed to pull
it down at the very bottom there where it's already out so to wire now it's gonna be really
easy because I've already got it all set up and all that so all I got to do today though is cut
a hole in the roof yeah good luck that's a fun thing so I'm gonna be doing that later but first
thing I'm gonna do is I'm gonna install the solar panel first so we're gonna get that going and I'll
sort of show you the brackets and pictures and everything as I go step by step and so it's not
that bad of a process just take some time so anyways we'll uh we'll get going here and then
we'll show you guys uh step-by-step pictures or just the little videos of how we do it so
wife's gonna be here helping me so it's awesome so yeah here we go tools
so anyways I set up a table here I just got all my tools so just a drill uh what I did is I bought
all stainless steel hardware uh because it is outside exterior so you don't want anything to
rust so the one thing is is you do use stainless for everything so I went through and measured
everything that I needed uh yesterday and got everything so I got my caulking which is a
construction adhesive and that's for the fan on the roof and you put that around to seal it so
water can't get in but also to help um just seal it to the roof so it sticks but you also screw it
down as well so I've got some screws and nuts and bolts and lock washers to actually put that in
place so that's for the these ones here this is that's for the fan yeah that's for the fan this
is going to be for the solar panel and I'll just walk through and then some caulking electrical
tape and I got some ties and just every little thing that I got to do but I'll show you pictures
okay safety glasses
so can you plug that in one more time honey yeah so now that I've crimped it and put it in I'm
going to tape it up really good there we go it's a little better it's just a finishing touch yeah
the screw is just we're going through the foam and through the just the roof it's just enough
to hold it which is perfect you have to go crazy I shouldn't have to glue it up no more as long as
you just get a little seal up there yeah you can feel it catching so you don't want to push too
hard it's just nice and gentle all right here we go we have our fan that's in the up mode that's off
that's the down mode the holes they are out these are awesome
good job power boost we did it we did it honey oh we have the fan fan is in and believe me in
so I'm going to remove the tail light what I did yesterday is I took a look at it
and there's a hole already in here like I was into the car with a fuse on it and lights
so all I'm going to do is remove this I hate having big fingers it's when you want to have
small fingers so all this does is it pops out in here there's two little pop you have to get closer
but there's aluminum I guess bolts that just pop into these and they're actually secure so
but here's the hole and I can actually see the wire hole down below so I don't know if I'm going
to go down or up I don't know what's going to be easier if I can get it up it'd probably be easier
yeah but down is pretty easy because you can sort of go to it well maybe I will go up
oh my god so this is our hey guys how you doing hey just wanted to finish off and just say uh
thanks we actually finished installing our solar panel and our fan so it's like awesome
and we got everything working and everything is working awesome so yeah it was it was fun so I
just want to say hey just like subscribe just follow us and uh just hope to share more and
more as we go so thank you so much take care bye bye okay we're done honey
yeah I saw it did you already see
so here we go it is installed fully installed ready to go it's all working we've got our
everything is cool so yeah we're excited there you go baby all done
there you go oh still going okay