Let Your Watercolor Paints Show Off! | Moody Landscape for Beginners

Easy Art Strokes
27 followers
2 Video Views·Jan 25, 2026
Hey friends! I'm so happy you're here. Today we are going to paint this moody
atmospheric landscape using only two colors. This is my second tutorial of
this style. I'll link the first one I did in the description. But man, this is a
lot of fun. So if you're looking for a relaxing painting session that shows off
what watercolor paints can really do, grab your brushes and let's get started.
The paint colors I chose for today are Indigo by Khor and Quinacridone Sienna
by Daniel Smith. If you find that you really love this style of painting, I
highly recommend getting some paints by Khor. This brand is known for the binder
in their paints, which causes the pigments to have an exploding effect
when they hit the water. It's much more dramatic than most watercolor paints. It
can be very difficult to control, but in a painting style like this, we don't
really want control, so they're very fun. I'm using this size 5 quill brush by
Medan. You just want a brush that can hold a lot of water that's a good size
so you can lay that water down quickly. This is equivalent to like a size 12 or
14 round. For the trees, I'm using a quarter inch dagger brush by King Art.
Everyone has their own preference for painting trees, so if you've never
painted a tree, definitely practice on some scrap paper first and try out some
different brushes to see which one gives you results you like. For me, it's a
dagger brush, but a lot of people like liner brushes or even just a round brush.
You'll want something with a sharp edge that you can use to get your paint onto
the paper. I'm using the end of a paint tube, but a palette knife is really ideal
for this. I just don't own one yet. You could use the edge of a credit card or
anything with that nice edge. The paper I'm using is a 5 by 7 inch block by
Leighton. It's 100% cotton cold press, but 160 pound versus the typical 140 pound,
so it holds water really well without buckling. And because it's a block, all of
the sides are glued down, so I don't need to tape it. If you're using a sheet of
paper and not a block, tape it down by the edges to a waterproof surface that
you can move around easily. We're going to be lifting and tilting our paper, so
you don't want to tape it straight to your desk unless you're in the mood for
a workout. I'm also going to use a little bit of bleed-proof white at the end. You
could use white gouache, acrylic, gel pens, or even try some highly concentrated
white watercolor paint instead. I'm starting by getting the tops off my
tubes first so that I can grab them quickly when I need them, because getting
the tops off of these things can be a pain sometimes, so I just want to be
ready. And before we start, this is important. Your painting will not look
just like mine. It's impossible. I could paint this 100 times, and each time would
be different. So I'm here to guide you through the process, but feel free to go
your own way and personalize this process for yourself. All of our pieces
will look different, and that's what makes them so special. Load your large
brush up with water and smear it across your page in whatever way feels right to
you. I'm just creating kind of this oval shape, and I'm intentionally making sure
that I have more water going down on the left side. This is where I'm going to put
my tree, so I want a little more space to work with. Run your brush over the paper
again, just to make sure that that water is really absorbing well into your paper
and not drying too quickly. Once you've got your water where you like it, get
some indigo straight from the tube and apply it to your sharp edge. If you only
have paint in pans, use a wet brush to get some paint onto your edge instead.
Okay, this is when it starts getting fun. Drag the edge across the horizon line of
your paper. Now, don't worry if your paints don't instantly spread through
the water like mine. That's those core paints doing that. We're going to use
water and movement to get our paint flowing in a minute. If you press hard
enough, you could leave physical marks on your paper as you do this, but that's
okay. I think it adds character. I'm intentionally trying to get a few
indents in my paper. I'm being careful not to put too much indigo on the left
side where my tree will be because indigo will easily overpower that area
if I'm not careful. Now clean your edge and apply some quinacridone sienna to it.
Repeat the same process, but I'm trying to put it on the bottom edge of the
horizon line because I want that color to bleed down more than up. Once you have
your paint down, it's time to tilt your paper and add more water to get those
paints flowing. I'm just dabbing my brush that's loaded with water onto the
paints and encouraging them to flow in the direction I've tilted my paper.
Clean your brush frequently to avoid muddy colors. When these two colors mix, they
make a grayish brown. We're going to get some of that because they're going to
blend on their own a little against our control, but it will be a much more
beautiful and subtle blend than if our brush is dirty with both paint colors
mixed on it. I want more of that quinacridone sienna on the bottom, so I'm
tilting my paper down and dabbing my brush on the quin sienna to get it
flowing in this direction. Try not to overwork this process. It's really hard
to know when to stop adding water and tilting because this is so fun, but the
less we intervene, the more likely we are to be left with some beautiful texture
from the paints. You can gently blot up excess puddles with your paper towel or
just leave them. Once you're satisfied with your background, let it dry. I like
to let it dry naturally for a bit just so I don't disturb the cool color blends,
and then I'll use a hairdryer after it's damp to get it extra dry.
My painting is dry and the sun came out, so I apologize for the shadows. I kind of
love that it looks like there's a giraffe on the right side of the sky in
my painting. I wonder if any cool shapes appeared in yours as well. I'm adding a
dab of indigo and a dab of quinacridone sienna on my palette. As I mentioned
before, when these colors mix, we get a neutral gray-brown color, which is
perfect for a tree. I'm going to mostly use indigo here, but I am going to add
some quin sienna in the mix just to warm it up a little. I want my tree to be very
dark, so I'm using a super thick consistency of paint to achieve that
dark value. Here you can see that I actually grabbed a scrap sheet of paper
and tested out a tree first. I wanted to make sure my paint color was good and
just warm up my hand with this dagger brush so that I'm ready to paint my tree
on my actual piece. Now I'm using the very tip of my dagger brush to paint a
tree. I'm going to wobble my brush a little so that the trunk and branches
aren't perfectly straight. I've learned that with trees like these, less is more,
so I try not to overdo it with the branches, even though in nature real
trees have like a million branches. I personally like the look of a simpler
tree better. It's so hard to know when to stop with the branches though. I'm so
frustrated that my hand was blocking the view of the camera, which of course I
didn't realize until after I was done filming, but I'm just adding little tiny
branches along each of these four large branches.
Let's have some fun with the base of our tree. Add some water to your paper near
the bottom of the tree trunk. Then dab some paint at the base of the tree and
let it bleed into the water. This could look like tree roots or a cool shadow.
I'm holding my paper up to encourage the paint to flow down into the water. I
decided to spread things out a little so I added more water to the sides of the
base of the tree and dragged out some of that paint so it would spread towards
the sides as well. Then I dabbed it with a paper towel just to soften up that
edge a bit. Now that my tree is dry I'm going to add some bleed proof white to
the branches. This could be snow or just some highlights. I find that this tiny
detail actually adds so much to the piece. I'm using this super tiny 1 1⁄8 inch
dagger brush but I probably could have stuck to the bigger dagger brush I was
using earlier and that would have been fine as well. You could also scrape this
white onto your tree using your palette knife or sharp edge from earlier. I'm
just imagining where the light or snow would be hitting this tree and dabbing
little lines of white there. The final step is to add some tiny branches or
grass near the base of the tree. This detail is going to ground our tree.
Unfortunately my hand blocked the camera again but you can see that I just added
some little lines here at the bottom of the tree using the same color that we
used for our tree. I'm going to stop there but feel free to add another tree
or two on yours or some more little branches or grasses. Use your artist's
intuition to see if there's anything else your painting needs from you. Thank
you so much for painting with me today. I hope you had fun and that you learned
something new and also that this whole process was as relaxing for you as it
was for me. Thank you so much for watching and I'll see you in the next
one.
