Narrated Glassblowing: Turning MOLTEN Glass Into A Piece Of Art

Art Creation
8 followers
Jan 23, 2026 #ArtCreation
Hey everybody, welcome back to the studio. Today we're going to be making a little bottle and we're
going to be using one of my favorite color patterns. I've been getting ready for some
craft shows later in the year and I'm making a lot of vases and different kind of shapes using
the same color pattern so I thought it'd be fun to kind of show you guys what I've been working on
lately. So a bunch of my work lately has been using these canes. I've kind of fallen in love
with using cane. They're basically, if you don't know already, they're basically like these little
strips of glass that we can make that are colored and we can create different patterns with them.
We get them hot and then we roll them up onto our blow pipe and then we can get different designs
and different colors and different things like that. You can make them in a whole lot of different
ways but basically we pull them into a long strip across the studio, cut them up, put them on this
little plate right here, and then my brother Luke is going to put them into this glory hole right
here. It's about 2,000 degrees and they're going to start to melt so they can all fuse together
and they turn into kind of like one flat plate. So we're going to squeeze these down, make sure
there's no gaps or cracks or anything, and then I'll be able to pass this off to Luke and he'll
take care of it while I go get a blow pipe so we can make a collar. So I'm gathering a little bit
of glass out of the furnace. This furnace houses all of our clear glass. It's about 2,100 degrees
on the inside. And like I said before, I'm making a collar. So I blow through the pipe, little bubble
comes out, we get rid of that bubble, we just melt it away. So now I've got basically just like a
little ring on the tip of my blow pipe. And we took a measurement on our pie divider of how long
that strip of canes is and the pie divider takes that length, divides it by pie, and tells me how
round my collar needs to be so that I can roll it up onto my blow pipe. Sweet! You think it's good?
So we have the right size and now all we have to worry about is making sure everything is just the
right temperature so we can go ahead and roll this up onto the blow pipe. So now that we have it on
the pipe, we just want to make sure that everything is lined up correctly and then we can start to
kind of melt it down and really fuse everything together. Once everything is nice and fused,
we'll do what we call a termination, where we're going to seal off the bubble by cutting off the
tip of the roll up with my jacks. So now that the tip is sealed off, we're going to work on kind of
compressing it down and getting rid of all of the ridges from all of the canes on the exterior.
I want this to be nice and smooth so that I can gather glass on top of it. Yeah, I need to like,
uh, yeah. Blow lightly. Blow again. So we've compacted it down quite a bit and now it's time
to apply the next gather of glass. So now we're going to start to set up so that we can twist
these canes and give it a cool little kind of spiral design. So I'm going to take my jacks and
on the tip of my glass, I'm going to make a small handle and now we're going to start to cool that
down by dipping it in the water and then we can heat up that back section and use that cold handle
on the tip to grab and twist the canes in the middle. Really? Yeah. Blow hard. Blow again. So now
that our canes are twisted, we're going to actually compact it down one more time so we can apply the
final gather. All right, off. So the shape we're going for today is kind of taller bottle. So what I'm
about to do is I'm going to take my jacks and I'm going to create a small line kind of right in the
middle of the piece and I'm going to do what we call pulling the neck. So this longer section
that's closer to the tip of the pipe is going to be the neck of the piece and the bottom kind of
bigger section is going to be the body. All right, off. Off. Blow again. All right, you can blow.
Blow lightly, Luke. Go ahead and blow. Yeah, the neck. So you can see it's just a little off-center
but we've finished basically the bottom half of the piece so now it's time to transfer it to a
second pipe. This is what we call the punty transfer. My brother Luke has a second pipe in
his hand and he's gathered a small bit of glass on the tip. He's going to shape it up and then bring
it over and we'll stab it onto the bottom of the bottle and we'll actually disconnect it from the
that I have and then we'll have it transferred and flipped over to the new pipe. All right,
what do you think? Ready? All right, here we go. Yeah, really thick. All right, so now we have it
transferred to the new pipe and the next step is to trim the lip. So there's a lot of glass from
where the connection was to the old pipe so we actually just want to cut that off. We're going
to pull it really thin and then just get rid of it. Like I said, they just didn't say anything.
So now that we've gotten rid of all that chunky glass, we just have to kind of shape it to its
final shape. Okay, and now we're basically done with the piece, but the last thing we have to
do is disconnect it from the pipe. So I'm heating up my connection point so that when I apply water
it really wants to break. That change in temperature really makes it want to crack.
So I put a little water right where I want it to break off and then my brother will pick it
up in his Kevlar gloves. We'll transport it to our annealer so that it can cool down overnight.
All right, and here's the final product. I'm really happy with how this turned out. I'm
trying to turn this into a little series. I love making these little spiral pieces.
And if you're interested in purchasing this piece, you can find a link to it in the description box
down below. So guys, thanks for hanging out with me today. I really appreciate it. Be safe out
there. We'll catch you in the next one.
