Sample injection molded parts from PDI, Plastic Design International - Middletown, CT

Technology Information
13 followers
9 Video Views·Jan 21, 2026
What role does plastics play in life?
Here's an example of a product that can save lives.
If you're in a situation where there's an earthquake, a hurricane, and no water to drink,
you can just take this and dunk it into any water and it makes the water safe to drink.
They knew that they wanted to make a product that could be dropped into a bottle
that had a cap that could be sealed onto because you have to fill the product.
They needed a cap that would be sonic welded into it so these little pellets don't fall out.
They needed a way to be able to pull it back out of the water container
and a way that you could carry it around and have it with you.
A portable method.
They had a rough idea on the design but when you're thinking about a product with
this many holes in it, how do you get holes around a curve and to come straight out?
These were the things that our engineers were able to help them with to come up with how to
make this product meet their needs.
This was a complete collaboration between their product design needs and our engineering team.
So how is this made?
Through plastic injection molding.
Because we at Plastic Design are such an experienced family,
we want to help you with your plastic needs.
Plastic does it.
So we have this project.
Our customer came to us.
It's a basically antenna with all electronics in it and our customer challenged us with
how can we overmold plastic over and keep the antenna centralized.
We developed a process and the challenge was when you're injecting plastic and
plastic was going over the electronic portion and entering the main antenna in here,
it was basically keeping that right in the center of the mold cavity because naturally
the plastic pressure will push the antenna to the sides and we came up with a process
and the end result is a perfect PDI solution for our customer.
These are a small component that are a filter screen.
Our customer came to us with this unique concept to have this screen molded into the part.
They wanted 16 of them made at a time.
We were able to use our rotary table machine in the design and we built the mold to have
two bottom halves.
The operator is sitting outside the press putting in these little film screens onto
each cavity pin.
The mold rotates into the back and is molding these parts.
The operator is able to then be loading more screens and we're able to reduce the cycle time.
It's a pretty common process, just not everybody has those machines because it's
a special machine.
We have a number of machines like this and over the years it became our niche, our strength.
When you think of PDI, think of insert molding, think of overmolding, think of PEM insert
molding.
Innovative idea.
Our customer wanted us to mold parts for them.
However, they didn't want us to mold them inside of our building.
Basically, we're molding the whole units right in our customer building, supplying the assembly
lines right from our machines.
We were making about a little bit over a million parts a year and we eliminate shipping costs
and overhead costs.
It's a bullet for calibrating a machine gun.
No, it's not a live bullet.
If they calibrate the guns on their Navy ships, they do not want to send lead into the ocean.
The challenge was how to make the stainless steel core inside of this part exactly in
the center of this part.
When it's overmolded, we have to keep the wall thickness at very, very, very tight tolerances.
We can hold tolerances within a couple thousands.
We did come up with a process on how to do this and as a result, we are molding this
part as I speak right now.
Here is the part that's how PDI started.
It's one of the first molds that were built right inside of our tool room many years ago.
Now, we are having a two cavity full automatic mold.
This part itself started as a fully prototyped aluminum mold.
Now, we're having a hardened steel mold that runs fully automatic without any involvement
with an operator.
And we have been making this part for the last 45 years.
Visit plasticdoesit.com.
Made right here in the USA.
Thank you.
