72. One Foot Turns: Forward Inside 3 Turn

Figure Skating Learning Channel
12 followers
1 Video View·Jan 18, 2026
We're Xenia and Oleg, four-time U.S. national competitors whose goal is to make Team USA
and represent the U.S. at international competitions. We'll share with you what
we learned along the way so let's make this journey together. Today we're going to be
showing you a new skating element. What are we showing today Xenia? We will show you how to do
a free jump. But first we'd like to thank SK and Elena for their support of our skating.
Thank you. All right, let's go show them. This video will contain information from our previous
three turns video. New information will be presented first. When doing one foot turns,
you do a cross check to keep yourself from unraveling. That is, check your shoulders
against your hips. When doing a forward inside three turn, make sure that you don't drop your
free hip in after the turn. This is very important if you're doing the landing position on the exit
edge. You also have to feel a cross check across your back from your skating shoulder to your free
foot. When done properly, free turns will help you to gain speed. This pressure meter shows you where
the maximum pressure is located. Press and bend your knee and ankle before you stroke into the
three turn. Escape the entry edge on an edge and through your heel. Rise to turn on the ball of
the foot, then press into your heel after you turn. Here we see how the pressure is spread out in the
turn. Notice that the pressure is least leading right into the turn through right out of the turn.
And while the least amount of pressure is in the turn, you still have to maintain some pressure,
otherwise you will jump it. Also note that there isn't a whole lot of pressure used.
While you do have to press, if you press too much your turns will look heavy and labored.
You should avoid skating through your shoulders, instead skate through your hips. Your arms have
to be strong but not stiff. You avoid being stiff by controlling your arms from your shoulder blades
and by keeping your shoulders down and back. Your knee and ankle action should be smooth and
continuous. A common mistake is to force the turn. Instead you make the turn happen by rising and
shifting your body weight to the front of the skate. Another mistake is to keep skating over
the ball of your foot after you complete the turn. Once you're backwards you have to be back on the
heel of the skate. Now let's look at some tracings. Correct pattern. Both the entry and exit edges are
solid. The lobe is good. The 3 turn is at the top of the lobe. Here we see a flat entry 3 turn.
If the skater skates the entry edge on a flat instead of an outside edge, this will happen.
Also if the skater skates the entry edge on the ball of the foot instead of the heel, this can
happen. Here we see a flat entry and exit edge. Remember to skate on edges and lobes. Normally
if you make your entry edge that flat you will end up forcing the turn which will result in a skid.
Here we see another common mistake. The toe picks scrape the ice leaving behind a telltale scratch.
This happens if you get up too far on the ball of your foot. Also if you're forcing the turn. Here we
see a 3 turn that was jumped. This happens if the skater applies too much pressure into the press
Always remember to listen to the sound your skates are making. A good sound will be the
carving of the ice from your edges and presses as you skate in and out of your turn. A bad sound
will be the sharp scraping of the ice with your toe picks. A common mistake is to do the landing
position but let the upper body lean forward making an unattractive position. Another mistake
is to be loose with the free foot or not holding it up long enough. Three turns are relatively easy
to learn but difficult to do well. Like anything else you want to do well they require consistent
and persistent practice. Hey everyone we really hope you enjoyed the video. If you did hit the
button and click on the subscribe to subscribe for more videos. Alright see you next time!
