Top 5 Crafts Everyone's Making | The Most Popular DIY Projects

Craft & DIY
230 followers
6 Video Views·Jan 18, 2026
In today’s video, I’m sharing the Top 5 Crafts of 2026, the DIY projects viewers loved the most this year! These crafts were chosen based on viewer favorites, engagement, and popularity. If you’re looking for crafting inspiration, budget-friendly DIYs, and creative ideas you can recreate, this video is for you.
Comments are disabled for this video.
So I've gotten a lot of comments about wrinkles and so I wanted to do this first project here
two different ways. So we're going to do the electrical outlet cover with one technique
and the light switch cover with a different technique and to get a different comparison
of the surface once it is complete. I want to use the same napkin for both of these and that's why
I'm using something very similar for the base as well so we can kind of compare and contrast
the differences between both of these techniques. So to start out I am just going to remove the back
two layers of this napkin and as you can see this second layer is giving me a little bit of trouble.
It did not want to come off there at first but that's okay we were able to remove enough of that
to be able to make our project and now that our napkin is all prepped I did grab the light switch
cover and we're going to start with that one and I'm positioning the napkin over the top of it
just to figure out exactly how I want to place this on top of the light switch cover. Now make sure
on this because it's kind of a rounded edge that you have enough extra napkin to go all the way to
the very edge of these light switch covers and once you're done cutting out a little piece of
this napkin we'll save the remainder of the napkin for the next light switch. So now that we have our
napkin positioned the way that we would like it I'm going to remove it from the cover and grab my
Mod Podge. Now the Mod Podge I chose to use for this was the hard surface Mod Podge and my thought
process on that was that it's typically used for furniture and different things that are more of a
harder surface that might get touched a little bit more and I felt like with a light switch and an
electrical cover they're going to get touched and I wanted to make sure I was protecting them the
best that I could. And once I've coated the whole entire light switch with my Mod Podge I grab my
napkin. Next I just hold that napkin over the top of the light switch until I'm satisfied of the
positioning and then I just lightly lay it down over the top. Now let's grab some cling wrap and
I'm going to take a small piece of cling wrap and lay that over the top of the napkin and then
smooth everything out. The cling wrap helps prevent you from tearing the napkin because
it's such a fine piece of paper and also takes out any of those wrinkles that might be there.
And once you're done smoothing everything out remove the cling wrap and let it dry. And now
that our piece is dried I'm going to place this on a little cup just to elevate it a little bit.
Next I grab more of the same hard surface Mod Podge and I'm just going to do a light coat over
the top of the whole entire light switch. Then I'm going to let this dry till it is dry enough to not
be tacky but not completely dry. So about 15 minutes. Then I take a piece of cling wrap and I
wrap it around my finger and I just start rubbing it along the top of this light switch. And that's
going to just remove any of those wrinkles before it is completely dry. And then a little over an
hour later I did repeat the exact same steps. I did another coat of the Mod Podge and I let it dry
for about 15 minutes. And then I took that same piece of saran wrap and I went ahead and I just
smoothed anything out that might have popped up. And once that is completely dry I grabbed my
zip sander but a sanding block would work just fine. And I went ahead and I sanded in a downward
motion around the perimeter of the light switch cover to remove all of that excess napkin. Now to
remove the center piece of that napkin I'm just going to take a razor blade and I'm just going to
trim that out. And once I remove that piece of napkin from the center there I grabbed my Mod
Podge and a tiny little brush here and I just went ahead and I brushed around the inside of that
hole there just to make sure none of that napkin would catch when you were turning the light on and
off. And once that dried 15 minutes later I went back in with my cling wrap and I just made sure
that no extra wrinkles appeared. And here is what our wrinkle-free light switch looks like. It turns
out so great. Now let's move on to technique number two. So we're going to be starting out by painting
the Mod Podge on half of our electrical cover here. And once we have that spread out evenly
I'm going to take my napkin and place that just gently over the top. And using some cling wrap
we're going to smooth everything down and then we're going to repeat the same steps on the other
half. And before that dries go ahead and remove that cling wrap. Now once that has completely dried
all the way we're going to carefully take a sanding block or I'm using a zip sander here
and I'm just going to lightly sand in a downward motion to remove any excess paper. Now you have to
be really careful with this since we haven't sealed anything in yet so just go really carefully and
take your time. And now that we have all of our excess napkin removed I grab my Mod Podge and my
brush and I'm just going to add a tiny bit of Mod Podge around the perimeter of this cover.
And then I'm going to just set this on a little cup and let it dry. And once this is completely dry
I'm going to take my razor blade and just cut out the extra napkin inside that outlet frame.
And just like we did for the light switch cover I'm going to take a little bit of Mod Podge and
we're going to seal in the perimeter of the outlet frames. And now that we have all of our prep work
done I am going to go ahead and just tape this down to a piece of cardboard using some painter's
tape. And to seal this outlet cover I am going to be using some matte clear enamel from Rust-Oleum
and I did two coats of this enamel to seal everything in. And once everything is dried
this is what our electrical outlet cover looks like and I just love how this turns out. This is
such a great alternative for sealing in your decoupage projects. I just think this is a great
tool to have in your toolbox. It doesn't work for everything but it's a wonderful way to ensure you
don't have any wrinkles. And here is a side-by-side comparison. Number one is using the Mod Podge and
Saran Wrap and number two is using a spray matte enamel. And this piece was inspired by a viewer's
comment so if you enjoyed this piece please let me know in the comments below and if there's something
you'd like to see me decoupage leave a comment and I will make sure to read them and try to
incorporate them into my videos. Thanks! Let's take some terracotta pots and make an adorable
piece for our yard. I'm starting out with four two-inch pots, one three-inch pot, and an eight-inch
saucer. And I did find all of these at my local Walmart. We're going to be starting out by painting
our saucer and I'm taking this Martha Stewart silver paint here and we're going to paint the
center of our saucer. And while that is drying I am going to go and paint my four little pots
and the three-inch pot. We're using our metallic green paint from Folk Art to paint these and we're
going to paint the outside and inside of these pots. Now I did end up doing two coats of paint
on this since I am going to be placing these outside. I want to make sure we have a nice coat
on these. Next I'm going to go ahead and go back to my little saucer here and I am going to flip
this saucer over and we're going to paint the back side of this saucer the same metallic green.
And once everything is painted on the back side of this saucer I will wait till it is dry and
flip this over and then I'm going to take that green metallic paint and I'm going to go around
the rim of the saucer. And now that everything is dry let's go ahead and grab some Loctite glue.
I got this at Lowe's and it works really good with terracotta pots. So I'm going to take this
Loctite and we're going to go ahead and take the four two-inch pots and we're going to add them to
the base of our saucer here. And you can see that I have the saucer flipped over. I'm going to
Then I'm going to add this power grip to the pots and then add that to the saucer.
This is going to take a little while for it to dry so I let this sit overnight.
So the next day I went ahead and I flipped this over and this is what our little piece looks like.
I'm going to take this piece outside and I want to go ahead and seal this right now.
And to seal this I'm using Rust-Oleum clear enamel. And now that our piece is sealed I'm
going back into my craft room and I'm grabbing my Fragment FX and these are little glass chips.
I'm going to add them to the top of my saucer here and I'm using the two different colored
greens that I have here from Plaid and a clear and a blue and this just gives a really beautiful
look inside of our saucer. Now if you haven't used these before you can find these at Walmart
and I've seen them at on Amazon so I'll put a link for those in my description box below.
But I personally like to use these with resin. You can also buy a Fragrant FX glue that you can
use as well but you'll have more of a bumpy edge which is fine if you're that's the look you're
looking for but I like a smooth look with the resin. And once you're satisfied with your glass
chips go ahead and mix up some resin. I know that some of you may not have done this before but this
I got from Amazon. I have tried the resin from the Dollar Tree as well and it works great.
So if you're using that resin you would probably want two A's and two B's to have enough for this
piece but I buy it in bulk on Amazon. So you just mix one part to one part and you stir it together
now I'm just going to pour this over the top of my glass chips. Now you may start to see that
there'll be a few little bubbles popping up here and what I'm going to do to remove those bubbles
is I use a heat tool and I just go ahead and I kind of warm the resin up and it allows those
bubbles to pop so we have a nice smooth surface. And if you don't have a heat tool a hair dryer
works just fine. Next I go ahead and let this resin sit overnight to dry. Now with that left
over three inch pot I'm going to set this down onto an egg carton just to help me stabilize it
so I can paint it. And I'm taking some multi-surface paint here from Folk Art and I'm starting with the
parchment paint and I'm using a q-tip to add little eyes to our piece. And this is just the
base for our piece. I wanted these eyes to be silver but I wanted to make sure they showed up
nicely on that green so I'm using that silver metallic paint that we used earlier on our saucer
and I'm going to add that over the top of the parchment paint. Next I grab my multi-surface
satin black paint and I'm going to go ahead and just finish the face for my little turtle.
Now we're just going to add a little bit of black to our eyes and then we'll let this dry.
And for our final touch on our eyes I'm going to add just a small little bit of that parchment
paint. I took this outside and sealed the face with the matte clear enamel. And now that that
resin has cured we're going to grab the Loctite Power Grab and we're going to add that to the
top of our piece. We're just going to make a little circle there and then we'll go ahead and
add our little turtle head. And once everything has dried our final step is adding a little
succulent plant to the top. This will just finish this whole piece off. Now I'm going to go set this
in my garden. I just love how this decor piece turns out. The resin just sparkles with the sun
and the glass chips and the little plant on top looks adorable. Let me know what you think in the
comments below. And if you're enjoying this content don't forget to hit that like and subscribe
button. It really helps my channel grow. Thanks! Today's video is part of the Everything Crafting
Top Craft playlist. Be sure to check out these amazing creators down in the description box
below. Thank you for watching and back to our video. Did you know you can decoupage on a non
traditional surface? Something that may be lumpy and not smooth? Well this basket we are going to
decoupage with this beautiful flower napkin that I got from HomeGoods. So I'm going to start out by
just opening up this napkin and I'm going to flip this over and remove the back two layers of the
napkin. And I find using a little piece of painter's tape helps remove those back two layers.
Now once we have just the top layer of the napkin we are going to take that napkin and try to fit it
around our basket. Now grabbing a pencil I am going to lift this basket up and I'm taking my pencil
and I'm drawing a small line on half of the napkin around the white frame of the basket.
Now I lay out my napkin and I grab a little container of some water and I'm going to take a
paintbrush and I'm just going to paint the line that I drew with the pencil. And once we have our
water line painted I'm going to just lightly tear the napkin on that first half. And then I take my
little heat tool and I'm just going to dry the water that's on the napkin there before I move
on to my next step. Once your napkin is completely dry again I'm going to take this napkin and I'm
going to fold it in half and I'm going to do the exact same thing on the other half of this napkin.
We grab that pencil and we're going to draw our line and once we have our line drawn I'm going to
take a paintbrush and I'm going to paint some water right where I drew the line so that I know
where to tear the napkin. Now using my paintbrush I'm going to remove any straight edges from the
sides of my napkin because I want to make sure that this napkin fades into the basket beautifully.
And once I'm satisfied with all the tears in the napkin I do go back in with my heat tool and make
sure that the napkin is completely dry. Now let's go back to our basket. I want to make sure that
this napkin is really bright on our basket so I am going to add a little bit of plaster paint
to the basket underneath that white line that was already there on the basket. Now this doesn't need
to be perfect it's just going there to help brighten up the napkin when we decoupage it on.
Now once our paint has completely dried I grab my Mod Podge and I'm just using the
classic Mod Podge in matte and I'm taking my little napkin here and I'm just going to set
that over the top of my basket. Now I grab my Mod Podge brush and I'm just going to decoupage
over the top of this napkin and I'm just going to paint that Mod Podge all over the top of that
napkin on the basket. So once you're done applying all of your Mod Podge we're just going to keep
this basket set down upside down for about two hours to dry. So once our basket has completely
dried I go ahead and I start tearing off that napkin around the perimeter of our basket
and if I didn't mention it earlier I when I put the Mod Podge on I only went to that white stripe
on the basket but that's why the napkin's able to tear so easily around the perimeter there
and you can see that I'm pushing my thumb down where I would like to tear the napkin just so
that nothing accidentally comes off from the bottom part of this basket before we seal it.
So now here is what our basket is starting to look like. What we're going to do next here is grab our
Mod Podge and I'm going to take that Mod Podge and we're just going to brush that around the perimeter
of our basket just to make sure that napkin stays into place before we seal everything
and then we set this aside to dry and once that is completely dry we're going to come back around
with our Mod Podge and do a sealing coat and I'm not going to show this on camera but I did do two
coats of the Mod Podge to seal everything in and here is what our final basket looks like.
I just love how this turns out. I think it just gives a unique spring look to our basket.
This might be a good item to put in your living room so you can put your remote controls in there
so you don't lose them or your earbuds. This could also be used as a napkin display holder
or anything else that you might find a use for baskets. So let me know what you might use it for.
Please drop a comment down below and if you're enjoying this content please hit
that subscribe or like button below. It really helps my channel grow. Thank you!
So I just love this beautiful napkin and I know it's not technically a Christmas napkin.
I thought this would be beautiful for a Christmas ornament. So what I'm going to do here is I am
going to flip this over and I'm going to take a little piece of painter's tape and just remove
the back two layers of this napkin. Next, I grabbed one of these ceramic ornaments and I
got these on Amazon in a 12 pack and they were about 15 or 16 dollars. So a little over a dollar
25 an ornament which I still thought was a really good deal. Next, I grabbed my Mod Podge and I'm
going to go ahead and just paint a nice thick coat over the top of this ornament. Then we're
going to let this dry. Now we're going to take a quarter of the napkin that we prepped earlier
and lay that right over the top of our ornament. Next, I layer a piece of parchment paper right
over the top of our napkin. Now I grab my heat press or a hot iron on low would work just fine
and you just go ahead and iron that napkin right on top of our ornament. Now I'm going to flip our
ornament over and we're going to repeat the same steps. Starting with our Mod Podge, we're going to
paint a nice thick coat over the top of our ornament. Next, we're going to let that dry.
Then we're going to layer our napkin with a piece of parchment paper on top and using our hot iron,
iron our napkin onto our ornament. And now that we have decoupage on both sides of our ornament,
I'm going to grab my zip sander or you could use a sanding block if you'd like and sanding
in a downward motion, we're going to remove all of the excess napkin from our ornament and I really
like how elegant this is looking. That ceramic ornament really makes a difference when we're
making these ornaments. Now for my next step here, I am going to be using a really thin brush and some
Mod Podge and I'm going to be adding some Mod Podge on half of the ornament in different layers
just kind of around the flowers. It can be sporadic, it doesn't matter where you're adding
this Mod Podge. You want the Mod Podge to be nice and wet still and what I'm going to do here is I'm
going to take this foil paper and I got this at Ben Franklin but you can also get this on Amazon
or at Hobby Lobby and I'm just going to start layering some of this gold foil over the top
of my ornament and don't worry if you have extra foil over the top of here because it's only going
to stick in the spots where you have the Mod Podge. Now once you've let that sit for a minute,
I go ahead and come in with my dry brush here and I'm just going to start brushing off some of that
foil from my little ornament and it's going to just leave this nice little hint of foil all
throughout the ornament and it adds this beautiful sparkle and then if you want to add any more foil
to this ornament just go back in and repeat the same steps. I used a little bit of Mod Podge and
I'm just going to tap some of those extra pieces of foil right on top of those spots. We'll let
that dry for just a moment and then we're going to grab our dry brush and brush any of the excess
off. Once you've let the front side of this ornament dry we're going to repeat the same
steps on the back side of our ornament and then around the perimeter of our ornament.
Now here is what our ornament looks like when the foil is complete. I did decide to make this a trio
set so I did three ornaments. For my next step I'm going to be taking my weeding tool from Cricut
but you could use a toothpick or something sharp and we're just going to re-poke the hole where
we've decoupaged over for the ornament so we have a place to be able to hang our hanger.
And before adding our hanger I did want to seal these ornaments so I took them outside
and using my Mod Podge and gloss I'm going to go ahead and coat both sides of these ornaments.
And now that these are sealed and dried we're going to go ahead and add some finishing touches.
I'm going to start out by taking this gold ribbon and it's really thin it's less than a quarter of
an inch and we're just going to go ahead and make some nice gold hangers. And we could completely
stop right here if you'd like but I really wanted to add just a final little touch. So I had a lace
panel in my stash that I got at a thrift store earlier last year and I've been using it for
various different crafts and so I was able to cut a few little strips off of it and I made three
little bows. Next I came in with some hot glue and I added a bow to each one of our ornaments.
Then I added a small gold bow on top of the vintage lace just to give it a little bit more
sparkle. And this is the same ribbon that I used for the hanger so it ties the whole piece together.
And now this beautiful trio set of ornaments is ready to display. I just love how these turned out.
I think this is my favorite ornament set for the year and I think these would be a wonderful gift
for a hostess or to have on top of a present as a tag. This also would make a really fun ornament
party with your friends. Every year I say I don't need anything more from the Dollar Tree
but every year in the spring they come out with some new pieces in the craft or square section
and I really love this wood wreath that I found. So let's start out by grabbing our Waverly Antique
wax and staining both sides of our wreath. And if you haven't done this before I just take a baby
wipe and I wipe that wax all over both sides and if it goes on too thick no problem just grab another
baby wipe and wipe off any excess. Now while our wreath is drying let's grab our Believe cutout and
I did get this at Dollar Tree but I've seen similar ones at Walmart, Hobby Lobby. These are pretty easy
to find. I'm gonna set this down on a paintable surface and I'm gonna start out by taping this
down so it's easier to paint. Next I grab my Waverly chalk paint in the color plaster and a
small brush and we're just going to paint the top part of this Believe cutout. And once that
paint has dried I'm going to take that Waverly Antique wax and I'm going to flip the Believe
sign over and on the back side I'm just going to stain it with the wax. Now once our Believe sign
is complete we are going to set that aside and work on our flowers. So these flowers I did get
at Ben Franklin but I've seen similar sets at Walmart as well and at Hobby Lobby but any flowers
that you prefer you can get. So I'm just going to take this bundle apart and I'm going to start
trimming up some of the pieces in this pic. And what you're going to see me do here is I'm just
going to pick a few of the flowers off of this pic and clip them and make a little swag. And once I
have the swag laid out how I would like it I grab my floral tape and I'm just going to wrap that
around a few of the stems here until everything is put together and then I'm going to add the
remaining pics to that same swag using the floral tape. And now that we have the base to our floral
swag I'm going to grab my twine and I'm going to take that twine and I'm going to use that to wrap
around where the floral tape is to cover that up and give it a more polished look. And once I was
done wrapping around that twine I just went ahead and I kind of tucked that into the twine that was
there and used a little bit of hot glue to make sure everything stayed into place. Now let's go
ahead and start putting everything together. The first thing I'm going to do is I'm going to make a
hanger for our wreath. One of the things that I've found from crafting through the years is that
sometimes you start making a piece and you create the whole entire thing it looks beautiful and then
you realize you don't have a good way of hanging it or displaying it. So it's one of the things that
I really try to do while I'm creating the craft now is think about where I want to hang it or how
I want to display it so that I incorporate the hanging method into the craft ahead of time so
it's not an afterthought. So for this wreath I'm just doing a quick twine hanger on it but I want
to do it before I add anything else to it. Now for the rest of the finishing touches we're going to
be using that believe sign we made, the swag, and two bows. I'm going to take my time a little bit
on this piece because I want to show you guys some of the little things that maybe don't show
up in some of my videos. So before I glue anything I always try to place the item that
is going to be glued to it on top of the item first without gluing it and sometimes I'm going
to grab like a pencil or something like that to just kind of mark on the back piece where I want
the glue so I don't have a lot of excess glue popping out of my piece so it looks so much more
polished and finished when I do it. So that is what you are seeing me doing here with the believe
sign. Next let's go ahead and add that floral swag and I'm going to put that right at the top
of this wreath right underneath where we put our hanger so I'm just going to pull that hanger tight
and then decide where I want to glue that and we're going to just glue that into place.
And next I'm just going to hot glue my little bows onto the swag so I'm starting out with a
raffia bow first which is a little bit bigger and it just gives it a really nice farmhouse look
and then in the center I'm going to match everything up with the twine that we used earlier
and put a bow right on top and now our beautiful wood wreath is complete. I just love the look of
this is so beautiful. I'm going to be hanging this in my office for inspiration. I feel like
this is such a fun piece and you can exchange the words out in the wreath for something different
that might inspire you. What word would you use to inspire you? Let me know in the comments below.
