This Is the Kind of RC Truck You Just Keep Driving!

RC- Car
12 followers
Comments are disabled for this video.
Here's an awesome way to get things rolling in 2026. A new build kit from Vanquish. It's the
VS410 Origin Classic. A refresh on their Origin kit that came out several years ago. I was lucky
enough to grab one of their Origin Pro half cab kits. That was an awesome build. This one is the
full body and they've made some revisions to it that you have to check out. It's got derp now.
And if you want to see what that is, you got to hang tight. I'm going to show you what's inside
the box first. I'm going to show you what gear I'm going to install on this truck because it's
a build kit. You're going to have to supply the electronics, even the wheels and tires on your own
and in a little bit we're going to take it out for a drive. Start off with a quick look at the
box art. Vanquish always has some killer box art and we'll pop open the box. It's a full build up
guy. It's even down to painting the body yourself. So you're going to get a bunch of bags of parts.
There's the clear Lexan body. Here's another large bag of parts. When you get the idea,
full build up. There is the instruction manual. And now let me show you the electronics I'm going
to throw in. Pretty simple setup. Got to go with a Flysky G7P transmitter and a Flysky receiver.
I have this Reeves RC1100 smart servo. I have had this in my drawer for a while. It's actually
a servo or a winch. I'm going to use it for the steering servo. It's got a lot of torque.
And then for the speed controller motor combo, got to go with this quick run 2-in-1
2300 kV. And I'll probably run a 3S battery pack, whatever I just pull out of the back room. But
over here, you also have to get the wheels and tires. So I'm going to go with Vanquish stuff,
obviously, since they have such killer wheel and tire combos. Got to go with the 475 for the hubs,
give it a little bit of a wide look there. Then I got their Battle Born wheels in bronze. That's
going to look pretty sick. And the Toyo Open Country tires. I'm going to head over to the
workbench now and get this built up. And along the way, I'm going to grab some video of some
of the features like the internals of the transmission and the axles so you can see
the build quality and materials that are used. Now, this is the Origin Classic kit, which means
it comes with the composite F10 axles. And if you're someone that wants aluminum goodies,
they have a pro version of this as well. There is, of course, a price difference between the two.
This kit right here, $399.99. If you want the pro version with all the aluminum goodies, $849.99.
There's the finished truck, RC Drivers. I think it's looking pretty sick, and it was a quick,
enjoyable build. I started probably late afternoon on a Sunday, wrapped up about nine o'clock,
got most of it together, was painting the body along the way, and then just finished it up in
a few hours in the morning the following day. But this thing looks sick. I love the way it came out.
Now, obviously, the Origin body, big draw to this kit. The box art version of it looked really cool
with the white, but I decided to go with yellow because it's winter out right now. I wanted
something a little vibrant out on the rock, so just sprayed it with a bright yellow, sprayed
the roof black, and then applied all of the decals. Quick little tip with the decals, use a heat gun
to just soften them up and push them down over the edges around all the windows, and it'll set
everything nice and neat. I like that it's got the extra details on here, molded windshield wipers,
door handles, but you can see, guys, no body clips, and that is part of the new derp system on here.
So they've got a molded grill in the front and molded tailgate in the back, and inside the body
is a pin system. So it's got mounts that mount to the body, and it's got a pin that just slips
into place. Let me grab one from the front here. There is a front and rear specific pin,
pretty easy to remove, and there it is. Your dual engagement retention pin, derp. That's pretty cool,
gets rid of the body clips. That was the only thing really killing the original look of the
Origin body, and this system is pretty cool. So I'll pop the one out of the rear as well.
There it is, and the body just comes right off nice and easily. There's those inner mounts that
I was telling you about. Again, lots of detail in the front grill. They even give you some taillight
bezels in the back. This body looks pretty awesome. Now, it doesn't come with the interior.
I believe you can go drop that in separately. You might need to do a little cutting. I'm not 100%
sure on that, but I think you can get it to fit in there, and then they have lights for it as well
that you can pick up for this kit. Now, let's take a look at the chassis. This is the platform for the
Classic. If you're a Vanquish fan, this is probably going to look familiar, starting off with the VS410
chassis. You've got the metal frame rails and solid bracing throughout, something I always love with
these kits. Look up front here. Look how solid this front end is. It just makes for a really rigid
chassis. Dual mount here, so you can go throw a winch servo in if you want to. I just have my
switch over here for now, so I could reach up from the bottom, turn it on without taking the body off
later. You got a fuel tank in the back that acts as a receiver box if you need it. It is not sealed
though, just be aware of that. And then you probably noticed that they have molded mud guards in here
now. This really sets us apart from the original Origin kit, which had Lexan inner fender wells,
which was cool at the time, but those often scrape the body and such. So now these are perfectly
formed to the body, shouldn't have that problem. And integrated into it is the shock towers, which
I thought was pretty interesting. At first, I wasn't too thrilled about it in case I wanted to
do something with the shock towers, but then again, with this trail truck, I'm probably just going to
leave it as is, to be honest with you. It is cool that they gave us Rocklite mounts here, if you want
to go throw those in after market, of course. There's actually little clips, so you can go run your
wires nice and neatly, like the little extra attention to detail. You got the Origin front
and rear bumpers on this. The side plates, so you can go mount electronics there if you want to.
You can throw your speed controller on one side, or if you upgrade the transmission later on down
the road, they have mounting points here for the servos. The rock rails here, these are pretty
interesting. You can see they've got these little guides, and that allows the body to just slip right
in, and just really locks in the body, so there shouldn't be any chatter or anything. Battery
mounts in the center here, Velcro straps to hold it down, the usual stuff. But I really like this
updated inner fender well system. It looks really cool, locks in. Let me just flip it over really
quick, so you can see the lower skid here, which goes and protects the motor as well. Side boards
have a little bit of an angle to them, so everything should glide over the rocks. And again, everything
went together well. The only issue I had that, and there was two issues during building,
was it told me to put screws right here in the chassis. And this is actually the hole for the
upper link for the suspension. So I had to go and remove those two screws. And what had happened was,
because I used the screws there, I was actually two screws short on the body guide mounts here. So
once I pulled those out, I was able to throw them in here and continue on with the build. But
I found that out later on down the road. All right, let's move on to the suspension next.
So it's got their S8E shocks on it, and these are an aluminum body. The cartridge comes pre-built
from the factory. You just have to throw some oil in there, bleed it out. It's got bleeder screws
on the top. Winds up being a really smooth shock. Do have a little gripe with the shock as well,
actually. So when I went through the Eclipse on, pretty much every single Eclipse bent as it went
over the shaft. Not too cool. That worries me a little bit that it might pop off while I'm driving
it. I haven't had that happen yet, but I think they need to machine the shafts a little bit better to
accept that Eclipse. Nonetheless, smooth shock. Even the shock perch on the bottom is screwed in
so you don't lose that on the trail. Then this truck is equipped with metal links, which is
awesome. Metal pivot balls as well. The lower ones, they're a heavy duty link and a little bit
thinner of a rod up top. Actually, the system works really well. I kind of griped about it a
little bit before on another Vanquish release. Haven't had an issue with it, so I think I'm going
to take that back. But as you can see, three link with a panhard bar and the front four link in the
rear, and then you've got metal steering links as well. Heavy duty rod ends on this.
They've improved it. Even the panhard bar mount on the chassis here is metal, so it's a really good
setup. Nice and plush. I didn't even use green slime on the O-rings and the shocks, and this thing
feels really smooth. So next up, we got to talk about the transmission, and that is their VFD
transmission. And what's cool about this is it looks like a transmission. The motor actually
mounts down below, so you get a lot of weight down low where you need it. This one is pretty
much all composite as far as the case and the mounts and everything go. If you get up into the
pro version, I believe that has a metal motor plate with it and then metal supporting guides
and such. But inside is where it counts. It does have centered metal gears. They actually look
really good. They're not the machine gears, but metal gears are a definite improvement over
composites. Full ball bearings throughout. They no longer have the aluminum guide plates for the
bearing in the back part of the transmission where the overdrive is, but you can pick those
up aftermarket. Again, ball bearing throughout. Chromoly shafts throughout as well. And then,
as you probably heard, it does have overdrive in the front, which is going to help you when
you're out crawling. Then they got their slider drive shafts. Love that they've got metal CV
joints in them. And then the F10 axles. These are pretty slick, guys. Absolutely love seeing
these. Even though I have the composite axle version, these still look really good. Nice
and smooth around the pumpkin, truss bracing there. Inside, those are machine metal gears,
so that's really cool. And then you've got universals up front, so you got plenty of
steering, low profile steering knuckles, so nothing's going to grab there. Ball bearings
throughout that. So this driveline Vanquish built up, except for the center metal gears in the
transmission, which could always be upgraded later. So that wraps up pretty much the build
up portion of this kit. Again, I went through a reef servo in there, a Hobbywing brushless system,
which is a two-in-one speed controller motor combo. And then there are the Battle Born wheels
with the Toyo tires. I actually threw a dual stage insert. I forgot to mention that before.
Threw that in there, so it's nice and soft. Then I went with the 475 offset hubs, just so it's got
a little bit more stability. And again, guys, the build turned out great. Now we just need to
see it perform. Let's head outside. All right, guys, we lucked out. It's been raining the past
few days, cleared out all the, well, most of the snow, I should say. And the top of the mountain
where I usually come crawling during the winter has plenty of rocks for us to drive the Origin
on. And there's some mud we're probably going to encounter too, so let's get into it. Here we go,
guys. On the start rock, look at that. The tires are still clean. First pull of the throttle.
Got a nice smooth crawl out of the system. And you know what? I'm noticing there's not a lot
of transmission whine on this one, so maybe I built it right. Maybe they fixed something,
but I'm really happy I don't have that odd clicking noise. All right, here we go. Rocks
are still a little damp. Look at that. Awesome. Backed it up from that last climb because, well,
it's all muddy up top, and I don't want to get the tires muddy just yet because I want some
traction. It'll just start slipping if there's mud on it, but look at that suspension work.
Really love this setup. Yeah, this is nice and smooth. Oh, I am happy with this build.
I think it did it right, even though I was kind of rushing with it, trying to get it done for
the launch here. It's a little too steep for it. Let me come back over. Kind of angles down a
little bit over here. No weight in this truck. And look at that, guys. Let's find some traction,
and they're right over the top. Awesome. All right, we'll hit this vertical ledge rock here.
I have to make a sharp turn at the top, and I go over to where the chassis clears,
a little spot that's kind of carved out. Watch this. I'll crank the wheels, pivot that truck
around. Overdrive helping out. Awesome. Now, one thing I forgot to mention when I was talking
about the build is the screw that they suggest to put in the servo horn is too long and it was
hitting the chassis. Maybe I read the instructions wrong, but just check for that if you're not
getting full steering throw. This looks good, guys. I mean, I am so happy with the way this
is performing. Just in the first few minutes, this is going to be a fun truck for the summer.
I'm going to drive it down this rock face here, crank the wheels,
show you the control, back off on the throttle. Oh, this hobby wing system was like made for this
truck. Look at that. Plenty of tire clearance too, even with the larger offset hubs on it.
Just wanted to be quiet for a second, just so you could hear it. Nice. Let's see if I can get up
these vertical ledge rocks here. I'm going to push this rig a little bit. Get some traction.
There we go. I think those two-stage inserts work perfectly with these tires. Kind of a must-have
item, I think. Oh man, I love this. I just wanted to reposition so you guys could see the suspension
dropped out in the rear, tucked in the front. Just love the way it works. I typically don't do that
transition right there because it hangs bumpers, but that just went through no problem.
That didn't work, but at least you guys saw the clearance of that front bumper. A lot of
steering throw. Look at that. Plenty of rear bumper clearance. That made it look easy. I'm noticing a
little bit of click in the driveline, but not as bad as some of the other kits I've built.
The other thing is the transmission is brand new. It does have to break in a bit.
Look at that steering. Love the pull from the overdrive. I don't know if I'd want the Pro,
but this is a spot I've been trying some more. It's off camber, so it could roll down the hill
towards me, and that was easy too. Drive it down through this valley here, taking it easy.
This is where it's going to get sketchy. You just nose forward, let those rails slide.
Reverse. Clear that route. There we go. Awesome. Now, this spot is pretty tricky.
Once again, I mean, wow. We're not even having any weight in this truck. I'm pretty impressed
with what it's capable of climbing. Running this thing on 3s pack. I'll just show you guys
the top speed in case you're interested in this setup. There's top speed, and of course,
you saw the slow crawl. I teased you guys early on that I was going to get this thing muddy,
so I got to deliver now. There's the mud, guys. Look at that. It looks good. I didn't want to
clean it, especially those wheels. I love those wheels, but they got to get dirty, right? Build
it and drive it. Okay, guys, let's wrap it up here. I think it's awesome that Vanquish brought
this back out, gave it a bit of a refresh, got rid of the body clips, gave us some better inner
fender wells, and just a few other little goodies throughout that I've already gone over. I mean,
this is a really cool looking kit. I loved my half cab origin, and I'm happy with the classic,
the standard classic, especially for the price tag. I mean, we're hitting $400 there before you
even add in electronics, wheels, and tires, but a really good build. Just a couple little hiccups
in the instructions, but nothing the average builder can't get through, and I gave you guys
a little cheat sheet on what you need to look out for, so let me know what you think about this in
the comment section below. Of course, you can find links in the video's description, and even
though it's freezing out, I'm going to continue to drive after I shut the camera off.
